Dodge/Chrysler Locker Application Guide

Powertrax LockRight gear sets enable easy conversion of an "open" differential to an automatic positive-locking differential. The Powertrax Lockright Locker is the original locking differential that can be easily installed in existing differential case assemblies without any special tools or setup equipment. It has been widely used in demanding off-road applications around the world requiring extreme traction output and high-strength.

For traction output, strength and durability, the Lockright. rivals much more expensive competitive lockers sold only as complete case replacement assemblies. It is a leading product because the Lockright delivers as much traction output, its end assembly is exceptionally strong, is much less expensive, and does not require professional installation (because the complete case assembly does not have to be replaced and realigned with precision calibration equipment). An excellent choice for off-road vehicle applications, performance enthusiasts also began using the Lockright to satisfy their extreme traction requirements for racing, hot-rods and muscle cars.

The Lockright operation is fully automatic. Designed to send the engine power to the wheels with the most traction, the Lockright will help get you where you want to go. While traveling straight the Lockright will lock the axles together similar to a spool. However, when the wheels need to differentiate in a turn, the Lockright will allow the outside wheel to rotate faster to complete the turn. The internal gears on the Lockright will overrun each other to allow this differentiation.

When operating off-road, the Lockright will always send the engine power to the wheels that need it most. For example, if you are rock crawling and one wheel is in the air (complete loss of traction), the wheel on the ground will receive the engine power and keep you going. Whether it be snow, sand, mud, ice, etc... the Lockright will give you the traction you need.

Although smoother than other competitive locking differentials, the brute force characteristics of the Lockright limit general application in less tolerant and more mainstream applications. In some vehicles, you will hear a light clicking noise as the gears are overrunning themselves and allowing the wheels to differentiate in a turn. This is normal of most lockers on the market today. We recommend the Lockright for vehicles that are primarily driven in severe driving conditions or are used for recreational off-road. The patented design provides the best traction value for light trucks, Dodge Dakota and Dodge 1/2 ton, 3/4 ton and 1 ton pickup truck, Jeeps, and 4x4's used both on-and off road they have the following benefits and features:

Rugged Power Delivery to Both Wheels Provides Huge Traction Improvement Greatly Exceeds Capabilities of Limited-Slip/Posi's Proven Off-Road Performance Automatic Operation (no compressor required) Uses No External Controls

Helps Prevent Axle Failure Brute-Force Dependability Easy Installation Broad Model Coverage Works in Front and Rear Differentials Assemblies Controls wheel spin provides maximum traction

Installation instructions available at our site "Installing a Lockright Positraction"

Vehicle Model	Year	Front Axle (spline)	Lock Right Part Num.	Your Price	Rear Axle (spline)	Lock Right Part Number	Your Price
Dodge Chrysler
Dakota	'97-98		N/A		Chrysler 8.25 (29)	N/A
	'87-96		N/A		Chrysler 8.25 (27)	1230	$410.42
	'87-96		N/A		Chrysler 7.25	N/A
1/2 Ton, 100, 150 Ramcharger	'76-96	Dana 44 (30)	2410	$324.24	Chrysler 8.25 (27)	1230	$410.42
	'73-98	Dana 44 (30)	2410	$324.24	Chrysler 9.25 (31)	1220	$407.17
	'97-98	Dana 44 (30)	2410	$324.24	Chrysler 8.25	N/A
	'69-72	Dana 44 (30)	2410	$324.24		N/A
	'67-68	Dana 44 (19)	2413	$394.24		N/A
3/4 Ton, 200, 250, Van	'72-98	Dana 60 (35 )	2620	$424.24	Dana 60 (30 )	2610	$424.24
	'96-98	Dana 60 (35 )	2620	$424.24	Dana 70 (32 )	2711	$448.58
	'77-97	Dana 44 (30)	2410	$324.24	Chrysler 9.25 (31)	1220	$407.17
	'89-97	Dana 44 (30)	2410	$324.24	Dana 70 (35 )	2710	$448.58
	'89-98	Dana 44 (30)	2410	$324.24	Dana 80 (35 or 37)	2810/2811	$448.58
	'69-71	Dana 44 (30)	2410	$324.24	N/A	N/A
	'67-68	Dana 44 (19)	2413	$394.24	N/A	N/A
1 Ton, 300, 350, 400, 450, Motorhome	'75-98	Dana 60 (35 )	2620	$424.24	Dana 60 (30 )	2610	$422.82
	'75-91	Dana 60 (35 )	2620	$424.24	Dana 70 (35 )	2710	$448.58
	'91-98	Dana 60 (35 )	2620	$424.24	Dana 70 (32 )	2711	$448.58
	'91-98	Dana 60 (35 )	2620	$424.24	Dana 80 (35 or 37)	2810/2811	$448.58
	'75-91	Dana 70 (35 )	2710	$448.58	Dana 70 (35 )	2710	$448.58
PowerWagon WC-XX, M, PW, WM300	'42-71	Dodge 9 5/8 (16)	1210	$322.85	Dodge 9 5/8" (16)	1210	$322.85

Notes:

We have made every effort to make this list as accurate as possible.

Identical model vehicles may have different axles or differentials than stated in this list depending on the original options ordered. It is advisable to check the vehicle to absolutely determine which differential and axle are present.

The LockRight is designed to fit into standard open differentials only. Always check the differential case, thrust washers, and pinion shaft for excessive wear or damage.

Notations (Nt)

1. GM 14 Bolt 9.5" differential = semi floating rear end, GM 10.5" differential = full floating rear end.

2. Most ABS differentials are identified by the bill of material designator on the axle tube of 605662-X (X= 1 to 3)

** Dana 60 possible axle splines: (2610 = 30 spline, 2620 = 35 spline)

**Dana 70 possible axles: (2710 = 35 spline, 2711 = 32 spline, 2720 = 35 spline with two piece case)

** Dana 80 possible axle splines: (2810 = 35 spline, 2811 = 37 spline)

Descriptions:

7.5", 8.8" etc....= diameter of ring gear

(30) = number of teeth on axle shaft spline

12 Bolt = number of bolts on differential cover

N/A = not available

* Ground Freight charges will be added.

In addition to the positractions units for Dodge Dakota and Dodge 1/2 ton, 3/4 ton and 1 ton pickup truck vehicles listed here, we also provide an impressive list of automotive after market products for car, pickup truck, SUV and 4wd repair parts and accessories that includes rear end covers, ring and pinion gears, OE clutches and heavy duty performance clutches, diesel gauge kits, exhaust brakes, re manufactured manual transmissions and both manual and automatic overhaul kits. Other products we offer for the RV recreational vehicle market include REMCO drivelinedisconnects, tow bar and baseplates and auxiliary overdrive units to improve vehicle performance and save fuel. We have a complete 4 wheeling drivetrain product line including complete differential assemblies, limited slip and other solid locking positractions. We offer transmission conversion kits including the NV4500 and NV5600 as well as replacement kits for light duty GM and Jeep transmissions. You may be interested in visiting our Ford and Powerstroke Diesel page, Dodge Ram and other Jeep pages for detailed information.

Watch for future additions of new products to be added to our on-line catalog including advanced wheels, tires, engine tune-up kits and other accessories.

Our large question and answer data base it's provided for you it provides additional information that may be of interest to you. Our easy to use vehicle information data base is cataloged by vehicle manufacture, part or component, to review just select Q&A data.

From time to time we offer specials discounts to our registered Internet customers, click below to register and receive advance notice of new products, special bonus offers and to be eligible for our free random gift drawings, we protect your e-mail address we, don't sell, trade or abuse it.

If it's a part and or a components under your vehicle we can supply it!

To order you can complete our easy to use secure electronic order form,

Or you can call the order desk at 1-800-216-1632, talk to a knowledgeable technician.

Considering purchasing parts from drivetrain.com and have questions contact Tech line at 1-702-876-3100 or send e-mail.

Drivetrain Specialists of Las Vegas - Las Vegas NV, 89102