Getrag HM290, 5LM60, NV3500 Truck 5 Speed (RWD) Manual Transmission Parts |
|
These quality HM 290 5 speed manual transmission parts, rebuild kits and overhaul kits are designed to be top of the line overhaul kits. Below you will find information on how to identify individual transmissions, application information, model year, and detailed kit and part availability by transmission type. Getrag HM290, 5LM60 and NV3500 transmission are covered in this section they are rear wheel drive (RWD). Typically used in Chevrolet and Dodge pickup trucks requiring 5 speed applications.
Different overhaul kits are available depending on the extent of the overhaul that you plan, the contents of the kits are described as follows:
Information and parts are provided for the following Transmission: Getrag HM290, 5LM60, NV3500 Truck 5 Speed (RWD) an illustrated drawing of the HM290/NV3500 is provided to assist you in parts identification, DWG Ref number is supplied were possible..
IDENTIFICATION: Aluminum end loaded case with integral bellhousing and "waffle" pattern cast into the case. This transmission has three different designs and designations. Commonly referred to as a Getrag, it is also known as a HM290 (Hydramatic), a 5LM60 (Muncie) and a NV3500 (New Venture). As the main differences are internal, you will need to tear down the unit before ordering the rebuild kit. This transmission uses a special synthetic fluid, which is available from your local dealer.
| Chevrolet / GMC | C / K Full Size Trucks | 1988-96 |
| Chevrolet / GM | S / T Compact Trucks | 1990-96 |
| Dodge | 1/2 - 1 Ton Trucks | 1994-96 |
|
PART NUMBER |
DESCRIPTION |
YEARS |
COST |
|
| REBUILD KIT MASTER |
|
|
||
| MRK100142 | Master Rebuild Kit HM290 (1st Design) With 33mm Wide Input and Rear Mainshaft Bearings. |
1988-89 |
$645.42 |
|
| MRK100143 | Master Rebuild Kit 5LM60 (2nd Design) With 33mm Wide Input and 23mm Wide Output Bearings. |
1989-90 |
$531.60 |
|
| MRK100141 | Master Rebuild Kit NV3500 (3rd Design) With 23mm Wide Input and Rear Mainshaft Bearings. |
1991-96 |
$386.20 |
|
| REBUILD KIT | K100142 | Rebuild Kit HM290 (1st Design) With 33mm Wide Input and Rear Mainshaft Bearings. Extension housing bushing not included, order separately. |
1988-89 |
$482.20 |
| K100143 | Rebuild Kit 5LM60 (2nd Design) With 33mm Wide Input and 23mm Wide Output Bearings. Extension housing bushing not included, order separately. |
1989-90 |
$323.60 |
|
| K100141 | Rebuild Kit NV3500 (3rd Design) With 23mm Wide Input and Rear Mainshaft Bearings. Extension housing bushing not included, order separately. |
1991-96 |
$189.80 |
|
| SYNCHRO RING KIT |
|
|
||
| SK141 | Synchro Ring Kit OEM |
1988-94 |
$370.34 |
|
| ASK141 | Synchro Ring Kit Brass |
1988-94 |
$123.53 |
|
| ASK141-L | Synchro Ring Kit 3-piece synchro Note: 1995-96 units have 3-piece synchro assemblies for 1st/2nd |
1995-up |
$154.74 |
|
| MISCELLANEOUS KITS |
|
|
||
| K100141-8 | Re-Seal Kit 4 Seals |
1988-96 |
$29.80 |
|
| 301388A | Small Parts Kit |
1988-96 |
$53.73 |
|
| DTSALTNK-290 | Needle Bearing Kit |
1988-1990 |
$46.86 |
|
| DTSALTNK-290A | Needle Bearing Kit |
1991-1992 |
$46.86 |
|
| DTSALTNK-290B | Needle Bearing Kit |
1993 & later |
$46.86 |
|
| Alt-WT290K | Key and Spring Kit |
|
$19.50 |
|
| DWG. REF # | MISCELLANEOUS PARTS |
|
|
|
| 62 | 301445 | Rear Bushing 2WD Chevrolet / GMC (not S10) |
1988-96 |
$29.76 |
| 62 | WT266-62 | Tail Housing Bushing Getrag 2wd, S10 |
|
$16.76 |
| 62 | Alt-290-62 | Tail Housing Bushing Getrag 2wd Full Size |
|
$16.40 |
| 29 | NAP301975 | Front Bearing Retainer Chevrolet / GMC Fits units that do not use a front spacer. |
1988-95 |
$47.73 |
| Alt-290-36A | Reverse Gear 40 tooth 23049704 |
|
$101.82 |
|
| Alt-290-16R | Input Shaft GM no ID groves on spines |
|
$97.79 |
|
| Alt-290-16AR | Input Shaft GM one ID grove on spines |
|
$101.42 |
|
| 63 | Alt-8678461 | Shifter, Getrag 1st and 2nd Design (no internal detent) |
|
$190.60 |
| 63 | Alt-27874 | Shifter Assembly Getrag 3rd Design (has internal detent) |
|
$101.30 |
| 63 | Alt-27964 | Shifter Assembly, Getrag Updated S10 (has internal detent) |
|
$76.06 |
| 190 | Alt-290-102 | Clutch Fork Pivot Ball Getrag (LUK# LAC152) |
|
$9.30 |
| 191 | Alt-8672243 | Front Counter Plug Getrag (BK235B) |
|
$9.90 |
| 6 | Alt-290-15 | Slider Getrag 3-4 |
|
$44.00 |
| 192 | Alt-290-15 | Slider Getrag 1-2 |
|
$44.00 |
| 193 | Alt-290-15 | Slider Getrag 5R |
1988-93 |
$44.00 |
| 193 | Alt-290-15A | Slider Getrag-on 5-R |
|
$70.20 |
| 24 | Alt-23049751 | Main Shaft Nut Getrag |
|
$35.40 |
| 15 | Alt-290-2 | Mainshaft, 4x4 Non-W/C, Full Size Getrag |
1988-91 |
$254.20 |
| 15 | Alt-290-2A | Mainshaft, 4x4 Non-WC Full Size Getrag |
1991-93 |
$254.20 |
| 15 | Alt-290-2B | Mainshaft, 2wd, World Class Full Size Getrag |
1993-on |
$254.20 |
| 15 | Alt-290-2C | Mainshaft, 4x4, World Class Full Size Getrag |
1993-on |
$254.20 |
| 5 | Alt-18130 | Syncro Assembly 3-4 |
|
$82.60 |
| 29 | Alt-290-6N | Front Bearing Retainer (1st/2nd Design) Getrag |
1988-91 |
$38.50 |
| 29 | Alt-290-6A | Bearing Retainer, 3rd Design Getrag |
1992-on |
$37.80 |
| 53 | Alt-290-8R | Cluster, early 1" groove Getrag 290 |
|
$109.00 |
| 53 | Alt-290-8AR | Cluster, Late 1" Groove Getrag 290 |
|
$187.00 |
| 53 | Alt-290-8BR | Cluster, late no 1" Groove Getrag 290 |
|
$187.00 |
| 53 | Alt-290-8CR | Cluster Getrag 290 |
|
$208.00 |
| 53 | Alt-290-8DR | Cluster, Long Rev Gear Getrag 290 |
|
$280.00 |
| 53 | Alt-290-8ER | Cluster, 1.3" Big Ends Getrag 290 |
|
$305.00 |
| 53 | Alt-290-8FR | Cluster 1" Bearings No Groove Getrag 290 |
|
$305.00 |
| 7 | Alt-290-11 | 3rd Gear, 1st Design 30T Getrag 290 |
|
$87.60 |
| 7 | Alt-290-11A | 3rd Gear, 2nd Design, 30T Getrag 290 |
|
$87.60 |
| 1 | Alt-290-16R | Input Shaft, Early w/step, 26t Getrag 290 |
|
$91.00 |
| 1 | Alt-290-16AR | Input Shaft, Late, w/o step, 26t Getrag 290 |
|
$91.30 |
| 1 | Alt-290-16BR | Dodge Input Shaft, 26t Getrag 290 |
|
$151.00 |
| 1 | Alt-290-16CR | Input Shaft, Late 3 id rings, 26t Getrag |
|
$91.00 |
| 1 | Alt-290-16FR | Input Shaft, late Dodge, 35t Getrag 290 |
|
$151.00 |
| 21 | Alt-290-18 | 5th gear 24t (1st/2nd & some 3rd design) Getrag 290 |
1988-95 |
$85.00 |
| 21 | Alt-290-18A | 5th gear 24t (3rd Design) Getrag |
1996-on |
$85.00 |
| 21 | Alt-290-18B | 5th gear 26t Getrag 290 |
|
$95.80 |
| 12 | Alt-290-21 | 2nd Gear, 39t Getrag 290 |
1988-94 |
$102.80 |
| 12 | Alt-290-21A | 2nd Gear, Getrag 290 |
1994-on |
$102.80 |
| 58 | Alt-290-23 | 1-2 Shift Fork Getrag 290 |
1988-92 |
$44.74 |
| 58 | Alt-25420 | Shift Fork 1-2 (1.950" Steel Piece) Getrag NV3500 |
1993-on |
$48.10 |
| 58 | Alt-25416 | Shift Fork 1-2 (1.875" Steel Piece) Getrag NV3500 |
1993-on |
$40.20 |
| 58A | Alt-290-23A | 3-4 Shift Fork Getrag 290 |
1988-92 |
$43.60 |
| 58A | Alt-25418 | 3-4 Shift Fork NV3500 |
1993-on |
$57.20 |
| 58B | Alt-290-23B | 5-R Shift Fork Getrag 290 |
1988-92 |
$40.24 |
| 58B | Alt-20046 | 5-R Shift Fork Full Size NV3500 |
1993-on |
$52.00 |
| 58B | Alt-20047 | Shift Fork, S10 NV3500 |
1993-on |
$63.20 |
| 16 | Alt-290-36 | Reverse Gear 38t Getrag 290 |
|
$92.00 |
| 16 | Alt-290-36A | Reverse Gear 40t Getrag 290 |
|
$92.00 |
| 18 | Alt-18132 | 5-R Sychro Assembly (no seal in reverse gear) |
|
$93.20 |
| 18 | Alt-18723 | 5-R Synchro Assembly (w/seal in reverse gear) |
$93.10 |
|
| ALT290-71 | Switch, Backup light 2 prong female connector fits HM290, NV1500 and NV3500 |
$18.60 |
||
Need parts not listed, just print illustrated
drawing of the HM290/NV3500, circle the parts you need
and fax it to us at 1-702-873-4534and we will provide a quote.
Minimum order of $25.00 on transmission parts.
In addition to the NV3500, HM290 HM 290 5 speed manual transmission parts, rebuild kits and overhaul kits listed here, we also provide an impressive list of automotive after market products for car, pickup truck, SUV and 4wd repair parts and accessories that includes rear end covers, ring and pinion gears, OE clutches and heavy duty performance clutches, diesel gauge kits, exhaust brakes, re manufactured manual and automatic transmissions and both manual and automatic overhaul kits. Other products we offer for the RV recreational vehicle market include REMCO drivelinedisconnects, tow bar and baseplates and auxiliary overdrive units to improve vehicle performance and save fuel. We have a complete 4 wheeling drivetrain product line including complete differential assemblies, limited slip and other solid locking positractions. We offer transmission conversion kits including the NV4500 and NV5600 as well as replacement kits for light duty GM and Jeep transmissions. You may be interested in visiting our Ford and Powerstroke Diesel page, Dodge Ram and other Jeep pages for detailed information.
Watch for future additions of new products to be added to
our on-line catalog including advanced wheels, tires, engine tune-up kits and other
accessories.
Our large question
and answer data base it's provided for you it provides
additional information that may be of interest to you. Our easy to use vehicle information
data base is cataloged by vehicle manufacture, part or component, to review just
select Q&A
data.
From time to time we offer specials discounts to our registered Internet customers, click below to register and receive advance notice of new products, special bonus offers and to be eligible for our free random gift drawings, we protect your e-mail address we, don't sell, trade or abuse it.
Most Orders Shipped the same day!! Most credit cards accepted.
|
|
Need Drivetrain Parts for your Import Vehicle see:
| Automatic Transmission Parts | High Performance Clutch Kits | Manual Transmission Overhaul Kits & Parts |
| Automatic Transmissions | Manual Transmissions | |