Having problems with Dana 30 front end? We offer a complete line of axle parts for the DANA 30 differential.
You can purchase high quality ring and pinion sets in various ratios, high quality
rear end bearing overhaul kits including pinion bearings, pinion seal, crush sleeve,
pinion nut,  shims, ring gear bolts, marking compound and gasket. Chrysler utilized
the DANA 30 differential in their Jeep line starting in 1966 in the J10, Wagoneer,
CJ5 and Cherokee. International used in the Scout from 1967 to 1980, it is also found
in some Ford applications Aerostar 1986 to 1990 and in early Bronco's 1967 to 1971.
Our inventory includes ring gear and pinion sets, including aftermarket and OE gear
sets. You can also purchase axles, carriers, cases, spider and side gear . We feature a wide selection of positractions for you to pick from including Eaton Detroit Lockers, Trac Loc positraction
units we also offer Lockrights by Powertrax, Auburn,
and ARB air lockers. We are a Dana Spice volume distributor and offer a complete
line or ring gear and pinions and differentials. To talk to a differential expert call 800-216-1632 and let us help save you some money!
Along with our quality parts you have access to applications
information for available ring and pinion ratios, information to assist you in identification
of the differential that you have. Free information
on ring and pinion installation is provided alone with
specifications and carrier/case
breaks when you are considering gear ratio changes. Free Technical advise, just call.
When ordering Dana/Spicer Differential Parts provide bill of
material number. This number is stamped on the right hand side axle tube. It's a number like 603XX-X,
604XX-X or 605XX-X.
With this number we can tell you exactly what components the factory used in the
assembly of your differential. You can the following link below to research exactly what parts you need, following step 1 and then step 2 and then enter your bill of material number: You will see a detailed list of parts and part numbers for your application.
You get the right parts the first time! Once you know the bill of material number give us a call or down load an application catalog 1999-2011 Dana 30 Front TJ Wrangler, XJ, X1 Cherokee, JK Wrangler adn WJ Grand Cherokee, Super 30 JK, WJ, KA & KJ Liberty inlcuding Exploded Views, Parts Listings and Bill of material tables to help you identify the parts you need.
|
|
Ring and Pinions Sets
Cases, Bearing kit and Misc Parts
Positraction Units
| Purchase the parts at drivetrain.com and receive free installation
technical support by telephone! Yes real technicians with many years experience,
not just a salesperson. |
| |
|
|
| |
|
|
| Model |
Year
|
|
Model |
Year
|
| Ford Aerostar |
86-90
|
|
Jeep J10 F |
66-88
|
| Bronco & U100 |
67-71
|
|
Jeep Wagoneer F |
67-88
|
| IHC Scout F |
67-80
|
|
Jeep Cherokee XJ |
86-95
|
| Jeep C101 F&R |
67-74
|
|
Jeep Wagoneer YJ |
87-96
|
| Jeep CJ5 & CJ7 F |
67-68
|
|
|
|
|
|
Dana 30 Front Parts Illustration Down load a Dana_30_service_manual if you need to do maintenance or repairs.
|
|
9-1/8"
10 HOLES
OVAL Gasket Pattern
|
SPECIFICATIONS
- Ring Gear DIAMETER 7.20"
- 10 3/8" X 20 RH THREADED BOLTS
- PINION DIAMETER 1.376" 26 SPLINE
CASE: 3.55 NUMERICALLY LOWER & 3.73 &
HIGHER
8620 Material Heat-Treated
Assembly Specifications:
- Cover Bolt Ft. Lbs. 30-40
- Pinion Brg. Preload In. Lbs 20-40
- Pinion Nut Ft. Lbs. 200-220
- Ring Gear Backlash .005-.009
- Ring Gear Bolt to case Ft. Lbs. 45-60
- Side Brg. Caps Ft. Lbs. 35-50
Instructions
for setting up ring and pinion backlash.
|
|
DANA/Spicer Kits includes ring & pinion, gasket, pinion
bearings, bolts, seal and shims, pinion nut & washer. We also offer Carrier Bearings.
When ordering Dana/Spicer Differential Parts provide bill of
material number. This number is stamped on the right hand side axle tube. It's a number like 603XX-X,
604XX-X or 605XX-X.
With this number we can tell you exactly what components the factory used in the
assembly of your differential
You get the right parts the first time!
|
|
Dana 30 Differential Parts
Part Number
|
Item
|
Description
|
Your Cost
|
|
Bearings
|
|
|
|
|
DTSR30RMKT
|
Bearing/Overhaul Kit Jeep
|
|
$107.87 |
|
R30FRMK
|
Bearing/Overhaul Kit Front
|
|
$111.66 |
|
DTR30LRMK
|
Bearing/Overhaul Kit JEEP Late
|
|
$114.64 |
|
706016-X
|
Carrier Bearing
|
|
$26.29 |
|
706030X
|
Outer Pinion Bearings |
|
$18.85 |
|
| Cases, Carriers and Internal Kits |
| 85911 |
CASE ASY-DIFF H/L 3.55 |
2002 WJ CV w/ABS |
$445.47 |
|
| 706008X |
CASE KIT STD 3.73-UP EMPTY |
1999 TJ |
$67.98 |
|
| 73688X |
CASE ASSEMBLY - DIFF STD 3.55 & Down |
|
$110.00 |
|
| 706003X |
CASE ASSEMBLY KIT 3.54 AND DOWN |
78-83 CJ5 & CJ7 |
$153.05 |
|
| 706007X |
CASE ASSEMBLY KIT STD 3.55-DN EMPTY |
99-01 WJ |
$76.09 |
|
| 706938X |
DIFF & PINION SHIM KIT |
|
$35.81 |
|
| 2002915 |
DIFF CASE ASSEMBLY KIT LOADED |
STD 27SP 3.73 UP |
$211.08 |
| 706010X |
INTERNAL PARTS KIT |
78-83 CJ5 & CJ7 |
$65.11 |
| 706934X |
DIFF CASE KIT (STD) 3.73 & UP, 27 SPLINE AXLES, EMPTY OPEN CARRIER |
92-96 YJ |
$89.25 |
| 706933X |
DIFF CASE KIT(STD) |
85-89 XJ |
$83.43 |
| 706007-1X |
DIFF CASE STD 3.55-DN KIT |
99-01 WJ |
$80.70 |
| 707158-1X |
DIFF CASE ASSEMBLY FRONT KIT |
99-01 WJ |
$216.37 |
| 707159X |
DIFF. ASSEMBLY KIT FRONT |
|
$455.62 |
|
| 2002913 |
DIFF. ASSEMBLY. KIT OPEN LOADED |
3.54 & DOWN, 27 SPLINE AXLES, OPEN LOADED CARRIER |
$155.24 |
|
| 708101 |
DIFF. CASE ASSEMBLY 3.73 & Up |
|
$148.22 |
| 708100 |
DIFF. CASE ASSEMBLY 3.55 & Down KIT |
|
$134.88 |
| 706935X |
INTERNAL PARTS KIT 27 SPLINE AXLES |
85-89 XJ |
$91.93 |
| 2002914 |
INTERNAL PARTS KIT |
27 SPLINE AXLES |
$73.93 |
| 708102 |
INTERNAL PARTS KIT, ST |
|
$51.22 |
| 73898-1X |
INNER YOKE SHAFT |
84-05 Jeep Dr Side |
$60.69 |
| 73898-2X |
INNER YOKE SHAFT |
84-05 Jeep Pass Side |
$59.75 |
Axles
|
| 75007X |
AXLE SHAFT ASSEMBLY. |
|
$65.43 |
|
| 75588-1X |
AXLE SHAFT ASSEMBLY RIGHT FRONT |
1984-85 XJ Disconnect, Cardan, System Sentry |
$273.83 |
|
| 75589-1X |
AXLE SHAFT ASSEMBLY. LEFT |
1993-93 1/2 YJ Disconnect ABS |
$153.93 |
|
| 75814-1X |
SHAFT & JOINT ASSEMBLY. LEFT |
1985 XJ Non-Disconnect, Cardan - Live Spindle Wheel End |
$160.59 |
|
| 75815-1X |
SHAFT & JOINT ASSEMBLY. LEFT |
1992-93 1/2 XJ Non-Disconnect, ABS |
$147.98 |
|
| 75814-2X |
SHAFT & JOINT ASSEMBLY. RIGHT |
1985 XJ Non-Disconnect, Cardan - Live Spindle Wheel End |
$160.59 |
Your gears run cooler and last longer!
Order above high performance synthetic oil and friction additive
combo kit at time of order for ring and pinion or bearing overhaul kit
and pay only $49.95 plus S&H, a $54.00 value.
Quality guaranteed performance
|
| 75815-2X |
SHAFT & JOINT ASSEMBLY. RIGHT |
1992-93 1/2 XJ Non-Disconnect, ABS |
$147.98 |
| SUPEV30LF |
Axle 76-81 CJ Complete with Big U-joint * |
|
$251.00 |
SUPEV30LR
|
Axle 76-81 CJ Complete with Big U-joint *
|
|
$251.00
|
SUPEV31LF
|
Axle 82-86 CJ Complete with Big U-joint *
|
|
$251.00 |
SUPEV31LR
|
Axle 82-86 CJ Complete with Big U-joint *
|
|
$251.00
|
| 707180X |
Carrier Cover KIT |
JEEP FRONT |
$34.57 |
| MW9062 |
Warn Locking Hubs |
|
$172.91 |
Dana
30 Positraction Differential Assembly Options
| Description |
Part Number
|
Price
|
Whats the difference in Positractions?
Check out Differentials whats the Difference |
| ARB 27 splines 3.73 and up |
RD100*
|
$1115.80
|
| ARB 27 splines 3.54 and down |
RD101*
|
$1115.80
|
| Eaton Tru Trac Rear 3.73 and up, more info & video |
912A588 |
$603.00 |
| Eaton Tru Trac 3.73 and up more
info & video |
DTS912A585 |
$490.67 |
| Eaton Tru Trac Front 3.54 and down more
info & video
|
DTS912A584 |
$657.60
|
| Detroit Locker 3.54 and down more
info & video
|
DTS162SL60A |
$673.47 |
| Detroit Locker 3.73 and up more
info & video
|
DTS162SL60B |
$673.47 |
| Positraction LockRight for open differential 27 spline |
2210
|
$277.16
|
| Positraction Powertrax no-Slip 27 spline open |
92-0430-2700
|
$414.62
|
|
| * Air Compressor 12 Volt Compressor |
CKMA12 |
$309.38
|
|
 Click to see enlarged image of Dana 30 Front differential
|
Click to see enlarged image of Dana 30 Front differential