Overdrive Unit, Ford 3 Speed C4 & C6 Auto

  • You need quality.
  • You'll want reliability.
  • You want performance.
  • You want better mileage.

YOU WANT A GEAR VENDOR

YOU GET ALL THESE BENEFITS & MORE

    Ford 3 Speed C4 and C6 overdrive unit

  • Save Fuel
  • Extend Engine Life
  • Save Money
  • 30,000 lbs Capability


Ford 3 Speed Automatic Truck/Motorhome   Ford C4/C6 3 Speed Automatic Final Drive Ratio
Ford 3 Speed Automatic Performance Car/Street Rod   Ford C4/C6 3 Speed Automatic Application Chart & Pricing
    Ford Horsepower and Torque Curves


FORD 3-Speed Automatic Truck/Motorhome

With the Gear Vendors dashswitch in “auto” you will have automatic overdrive just like the vehicle came with a factory system. The dashswitch can either be mounted in our underdash bezel or the custom indash bezel like the Feetwood Limiteds that came factory with the Gear Vendors. The Gear Vendors will shift in and off without attention of the driver and can be used while towing up to combined weight of 30,000 lbs. An interactive floorswitch is positioned for the left foot (just like a headlight dimmer) to give manual control at any given moment so that you can turn the overdrive on/off for performance and gear splitting.

Performance while accelerating or climbing grades is greatly improved by the availability of 6 forward ratios (see final drive). With approximately 1/2 the drop in engine rpm on each gear change and the ability to downshift at 1/2 the intervals (much sooner than with the stock only transmission) performance gains of over 40+ horsepower and 60lb ft. of torque are typically minimum. (See Horsepower and Torque curves).

Most importantly you are getting this horsepower and torque without modification in any way to the engine. Any other way of increasing power (chips, induction, exhaust, fuel) all put stress’s beyond the original equipment. With the Gear Vendors OVERDRIVE you get this power because gears are multipliers of torque, plus the engine can be kept in a narrower (better performing) rpm range when power is needed. For this reason, if you do have performance modifications the Gear Vendors also helps them work to their maximum potential. Not only do you get performance without engine modification, but the overdrive will pay for itself in fuel mileage alone. Add to this the savings in wear you get from slowing the engine down 22% so that the same rpms that currently take you only 500 miles will now take you 640 miles.

Most vehicles will experience mileage increase in the 20 percent region if driven at the same top speeds as they are without the Gear Vendors. Increased mileage and reduced engine wear is why all vehicles today come with factory overdrive

The gear vendors OVERDRIVE will do more for this vehicle then any Underdrive or Overdrive on the market. You will get all the features normally associated with an underdrive except a gear below first, plus all the economy of overdrive. Because Gear Vendors is the only product you can shift under throttle you will have far greater performance and economy. The Gear Vendors comes with the best money back guarantee (see warranty for details). There is not room here to discuss every situation that arises where additional gears and torque multiplication help your vehicle perform. Look at the final drive ratio page and then call and get one, you will be absolutely glad you did.

FORD 3-Speed Automatic Performance Car/Street RodFord 3 Speed C4 and C6 overdrive unit

At about 2200 dollars (depending on models) the Gear Vendors is not the cheapest way for you to get overdrive (a rebuilt wreaking yard AOD is probably cheaper) but the Gear Vendors is by far the best way. Horsepower handling is the first issue. A Gear Vendors will handle 1200+ horsepower reliably. This is why you have seen Gear Vendors in 8 second 1/4 mile cars in publications like Hot Rod and National Dragster. This is also why all GM Callaway Corvettes with automatics came with a TH400 and GEAR VENDORS instead of the 700r4 which is the base Corvette trans. and comparable to the AOD Ford. If you’re running more then 1200 horsepower (and we have customers that are) then talk to us at the factory as there are some hydraulic changes we do for vehicles up to 2000hp.

Horsepower aside, there are several other reasons you will prefer a Gear Vendors to any factory overdrive automatic. You will have a dashswitch that allows both manual ad automatic operation. With the switch in “auto” the vehicle will act just like it came from the factory with overdrive. The overdrive will kick in at 47 mph or whatever the EPROM is set for in our electronics and turn back off at slower speeds without attention of the driver. The ratio is .78 to 1 (see the final drive ratio charts on page 17). This equates to 28% faster vehicle speed at the same rpm. Or, take your existing rear gear multiplied by .78 (i.e. 4.10 X.78=3.20). In this example a vehicle with a 4.10 behaves just like it had 3.20s when the overdrive is engaged. This is just the right amount of overdrive as any taller would require a lock up converter or create excessive converter slippage. With the .78 to 1 ratio you’re good with any torque converter you chose for high performance street/strip use.

Another great feature of the Gear Vendors is that you will have a full 6 forward ratios when you switch to manual on the dashswitch. Pull into low, accelerate, then hit our button (on the shifter or the floor), a green light appears indicating overdrive and your in first over which is right between 1st and 2nd . Then shift to 2nd and turn us off. Then rev back up and hit the button for 2nd-over. Then 3rd and 3rd-over. See more information on Gear Splitting in the Drag Racing section. The performance and sound of the motor is tremendous as it goes through 6 full throttle close ratio shifts. You are in each gar 1/2 the time you are now so the car is not only faster but it also feels and sounds much faster.

Check out the unlimited horsepower warranty and money back guarantee (under 3-spd truck) and the simple installation in the dimensions section. Then order by calling (800) 216-1632

Find you transmission and rear gear multipliers above. The Final Drive Ratio shows you how many times the engine turns for one complete turn of tires. This Final Drive number is also your torque multiplier when in that gear. Gear Vendors reputation for being to best is because of its sophisticated planetary construction. This means Gear Vendors is the only auxiliary intended as a gear splitter behind automatics and the nicest to work behind both automatics and manuals. You are able to shift half gears that keep the engine in the power. Any auxiliary that requires you to let off of the accelerator or is not intended to shift frequently is not going to give you this performance.

Final Drive Ratio C4/C6 3-Speed Automatic

 
                   
   

Axle Ratio

 
   

5.13

4.88

4.56

4.1

3.9

3.73

3.55

3.23

  Transmission Ratio

Final Drive Ratio

 
1st 2.46 12.62 12 11.22 10.09 9.59 9.18 8.73 7.94
Over 1.92 9.84 9.36 8.75 7.87 7.49 7.16 6.81 6.19
2nd 1.46 7.49 7.12 6.66 5.99 5.69 5.45 5.18 4.72
Over 1.14 5.84 5.55 5.19 4.67 4.45 4.25 4.04 3.68
3rd 1 5.13 4.88 4.56 4.1 3.9 3.73 3.55 3.23
Over 0.78 4 3.81 3.56 3.2 3.04 2.91 2.77 2.52


Ford Application Guide 2 Wheel Drive 3-Speed Automatic  

Part Number

Application

Description

Comments

Price Truck & RV

Price Cars/Racing
3D0040 C-4 3 Speed Automatic Replaces 13" tailhousing Ford light duty vans pickups and cars

$2795.00

$2595.00

3D0041 Shorty C-4 3 Speed Automatic Replaces 13" tailhousing. Coverts long shaft C4 to a short 4wd version (That's 5 .5" shorter) Muscle car applications w/limited tunnel & driveshaft length

$3195.00

$2895.00

3D0060 C-6 3 Speed Automatic Replaces 14" tailhousing, also see 3D0063 below Ford vans, pickups, class C motohomes and cars, including motorhomes and passanger cars including 6.9 and 7.3 diesels

$2695.00

$2595.00

3D0063 Shorty C-6 3 Speed Automatic Replaces 14" tailhousing, uses GV supplied output shaft, shortens packae by 10" Used on some muscle cars & 1970's pickup trucks.

$3195.00

$2895.00

Check out the unlimited horsepower warranty and money back guarantee and the simple installation in the dimensions section. Then order give us a call..


In addition to the overdrive units, we also provide an impressive list of automotive after market products for car, pickup truck, SUV and 4wd repair parts and accessories that includes rear end covers, ring and pinion gears, OE clutches and heavy duty performance clutches, diesel gauge kits, exhaust brakes, re manufactured manual and automatic transmissions and both manual and automatic overhaul kits. Other products we offer for the RV recreational vehicle market include REMCO drivelinedisconnects, tow bar and baseplates and positraction units to improve vehicle performance and save fuel. We have a complete 4 wheeling drivetrain product line including complete differential assemblies, limited slip and other solid locking positractions. We offer transmission conversion kits including the NV4500 and NV5600 as well as replacement kits for light duty GM and Jeep transmissions. You may be interested in visiting our Ford and Powerstroke Diesel page, Dodge Ram and Jeep pages for detailed information.

Watch for future additions of new products to be added to our on-line catalog including advanced wheels, tires, engine tune-up kits and other accessories.

Need more information call 1-800-216-1632 talk to a knowledgeable technician.

From time to time we offer specials discounts to our registered Internet customers, click below to register and receive advance notice of new products, special bonus offers and to be eligible for our free random gift drawings, we protect your e-mail address we, don't sell, trade or abuse it.

Click Here to Sign UP


Most credit cards accepted.

To order you can complete our easy to use secure electronic order form,
Or you can call the order desk at 1-800-216-1632, talk to a knowledgeable technician.
Considering purchasing overdrive or parts from drivetrain.com and have questions contact Tech line at 1-702-876-3100 or send e-mail.
Our Simple Sales and Return Policy.
Drivetrain Specialists of Las Vegas - Las Vegas NV, 89102


Home    
 

Drivetrain Specialists of Las Vegas

Las Vegas NV, 89102