These quality AX4, AX5 and AX15 rear wheel drive (RWD) manual transmission parts, rebuild
kits and overhaul kits and overhaul kits are designed to be top of the line
overhaul kits. We have included information on how to identify you individual
transmission, application information, model year, detailed kit and part availablity
by transmission type. The Aisian Warner transmissions that are covered in this
section are: AX4, AX5 and AX15 models's, rear wheel drive (RWD). Typically used
in Jeeps requiring 4 and 5 speed as well as Dodge and Isuzu 5 speed applications. In addition to bearings,
gaskets and seals we can provide input shaft, counter shafts, syncro rings,
syncro hubs and needle bearings. Individual gear and shift forks are also available.
An extensive list of transmission tag identification information
is provide at our tag conversion
table, check it out cross reference your information and get the correct
parts the first time.
Different overhaul kits are available depending
on the extent of the overhaul that you planning, the contents of the kits are
described as follows:
-
DTSBKXXX Kits (RWD): Main case bearings,
gaskets, seals. You may also want to add new bearing retainer, nuts, dogs
& wires, extension housing bushing, small parts kit, shifter bushings.
Syncro rings are not included in these kits.
-
DTSBKXXXWS Kits (RWD): Main case
bearings, gaskets, seals. You may also want to add bearing retainer, nuts,
dogs & wires, extension housing bushing, small parts kit, shifter
bushings. Syncro rings are included in these kits.
-
An AX4 and AX5 transmission illustration
is provided to assist you with ordering the correct parts.
An AX15 transmission illustration
is provided to assist you with ordering the correct parts.
Information and parts are provide for the following Transmission:
Asian Warner AX4 / AX5 / AX15 5 Speed (RWD)
IDENTIFICATION - End loaded, aluminum case with four bearings,
an 8-bolt front bearing retainer and a 4-bolt shifter.
| AX4 / AX5 (4 Cylinder) |
80mm Outside Diameter Input Bearing |
1984-96
|
| AX5 (6 Cylinder) |
80mm Outside Diameter Input Bearing |
1986
|
| AX15 (6 Cylinder) |
90mm Outside Diameter Input Bearing |
1989-98
|
| AX15 |
Dodge Trucks including Dakota |
1992-97
|
| Vehicle |
Trans. Model
|
Year |
Description |
Overhaul Kit
|
Your Cost
|
Overhaul Kit with Syncro Rings
|
| 4spd, RWD or 4WD Toyota design - |
|
|
|
|
|
|
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX4 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$140.56 |
DTSBK160AWS |
$188.81 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX4 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$ 140.56 |
DTSBK160AWS |
$ 188.81 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.1L |
AX4 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$ 140.56 |
DTSBK160AWS |
$ 188.81 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.1L |
AX4 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$ 140.56 |
DTSBK160AWS |
$ 188.81 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.1L |
AX4 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX4 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.1L |
AX4 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX4 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| 5spd, RWD or 4WD Toyota design - |
|
|
|
|
|
|
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.1L |
AX5 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$ 140.56 |
DTSBK160AWS |
$ 188.81 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX5 |
1984-87 |
20mm wide input bearing - nut type countershaft |
DTSBK160A |
$ 140.56 |
DTSBK160AWS |
$ 188.81 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.1 L |
AX5 |
1984-87 |
20mm wide input bearing |
DTSBK160A |
$ 140.56 |
DTSBK160AWS |
$ 188.81 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX5 |
1984-87 |
20mm wide input bearing - nut type countershaft |
DTSBK160A |
$ 140.56 |
DTSBK160AWS |
$ 188.81 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.1L |
AX5 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX5 |
1984-87 |
23mm wide input bearing - nut type countershaft |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.1L |
AX5 |
1984-87 |
23mm wide input bearing |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX5 |
1984-87 |
23mm wide input bearing - nut type countershaft |
DTSBK161A |
$ 136.76 |
DTSBK161AWS |
$ 196.86 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer |
4 cyl |
2.5L |
AX5 |
1987-01 |
23mm wide input bearing - snap ring type countershaft |
DTSBK161LA |
$ 151.74 |
DTSBK161LAWS |
$ 197.87 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
4 cyl |
2.5L |
AX5 |
1987-02 |
23mm wide input bearing - snap ring type countershaft |
DTSBK161LA |
$ 151.74 |
DTSBK161LAWS |
$ 197.87 |
| 5spd, RWD or 4WD Toyota design - |
|
|
|
|
|
|
| DODGE TRUCK |
Dakota |
6cyl |
3.9L |
AX15 |
1992-99 |
|
DTSBK163J |
$ 209.95 |
DTSBK163JWS |
$ 260.90 |
| DODGE TRUCK |
Dakota |
4cyl |
2.5L |
AX15 |
1994-99 |
|
DTSBK163J |
$ 209.95 |
DTSBK163JAWS |
$ 260.90 |
| ISUZU TRUCK |
Trooper |
6 cyl |
3.5L |
AX15 |
1998-02 |
removable bellhousing |
DTSBK163E |
$ 227.67 |
DTSBK163EWS |
$ 694.84 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer Continued |
6 cyl |
4.2L |
AX15 |
1990 |
Aluminum case |
DTSBK163J |
$ 209.95 |
DTSBK163JWS |
$ 261.91 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
6cyl |
4.2L |
AX15 |
1990 |
Aluminum case - ball input bearing |
DTSBK163J |
$ 209.95 |
DTSBK163JWS |
$ 261.91 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer Continued |
6 cyl |
4.0L |
AX15 |
1990-00 |
Aluminum case - ball input bearing |
DTSBK163J |
$ 209.95 |
DTSBK163JWS |
$ 261.91 |
| JEEP |
CJ2A, CJ3A, CJ5, CJ6, CJ7, CJ8, Jeepster, Scrambler & Wrangler |
6cyl |
4.0L |
AX15 |
1990-00 |
Aluminum case - ball input bearing |
DTSBK163J |
$ 209.95 |
DTSBK163JWS |
$ 261.91 |
| JEEP |
Cherokee, Grand Cherokee, Comanche & Wagoneer Continued |
6 cyl |
4.0L |
NV3550 |
2000-on |
Getrag design, aluminum case |
DTSBK235E |
$ 170.47 |
DTSBK235EWS |
$ 347.97 |
|
PART NUMBER
|
DESCRIPTION
|
TYPE
|
YEARS
|
COST
|
| SYNCHRO RING KITS |
|
| SRK157 |
Syncro Ring Kit |
AX5 |
1984-97
|
$55.92
|
| SK506 |
Syncro Ring Kit 3rd-5th Same Inside Cone |
AX15, |
1989-90
|
$108.89
|
| SK506L/ALT-SRK163JA |
Syncro Ring Kit 5th Inside Cone Different
than 3rd-4th |
AX15, |
1991-99
|
$118.28
|
| MISCELLANEOUS KITS |
|
| K100502-8 |
Gasket & Seal Kit |
AX4 / AX5 |
1984-96
|
$20.62
|
| DK500 |
Syncro Dog & Spring Kit |
AX4 / AX5 |
1984-96
|
$30.74
|
| DK506 |
Syncro Dog & Spring Kit |
AX15 |
1989-96
|
$41.46
|
TRS372001
|
Small Parts Kit |
|
|
$70.08 |
| BEARINGS |
|
| 301570 |
Input |
AX4 / AX5, 23mm Wide |
1984-96
|
$42.60
|
| 301770 |
Countershaft, Front |
AX4 / AX5 |
1984-96
|
$41.30
|
| MTCNBAX5 |
Needle Bearing Kit |
AX5 |
|
$109.96
|
| METAL CLAD SEALS |
|
| 301080 |
Front |
|
1989-97
|
$6.92
|
| 301038 |
Rear |
2WD |
1989-97
|
$6.90
|
| 301089 |
Rear |
4WD |
1989-97
|
$6.00
|
| MISCELLANEOUS HARD PARTS |
|
| TRS37670 |
Input Shaft Gear |
AX5 (Gas) with 20mm Wide Front Bearing |
1984
|
$116.58
|
| TRS37670A |
Input Shaft Gear |
AX5 (Gas) with 23mm Wide Front Bearing |
1985-E87
|
$136.52
|
| TRS372672 |
Main Shaft 4WD
|
|
1984-E87 |
$255.77 |
| TRS372672A |
Main Shaft 4WD |
|
1987-Up |
$164.64 |
| TRS83500557 |
Cluster Gear 45-31-20-13-14 |
AX5 (Gas) with nut
|
|
$164.48 |
| TRS83506023 |
Cluster Gear 45-31-20-13-14 |
AX5 (Gas) with Snap Ring
|
|
$164.48 |
| ALT4636370 |
Input Shaft, 29T .750 Pilot Dia. |
AX15 |
|
$195.20
|
| ALT4636371 |
Cluster Gear 43-32-21-R13-12, |
AX15 |
1992-1996
|
$277.4
|
| TRS372735 |
Front Bearing Retainer |
AX5 with snout
|
1984-E87
|
$76.89
|
| TRS372735A |
Front Bearing Retainer |
AX5 with out snout |
1987-Up
|
$76.89
|
| TRS372736 |
Rear Bearing Retainer |
|
1984-E87 |
$41.50 |
| TRS372736A |
Rear Bearing Retainer |
|
1987-Up |
$51.36 |
| ALT5252077 |
1st Gear 31T |
AX15 |
|
$158.82
|
| ALT5252078 |
2nd Gear 33T 2 ID |
AX15 |
1986-91
|
$108.00
|
| TRS462583 |
3rd Gear 31T 1 ID Groove |
AX15 |
|
$126.64
|
| TRS462582 |
2nd Gear Late |
AX15 |
1992-97
|
$147.67
|
| TRS462585K |
5th Gear Set Update Kit (47 T) Includes 5th Gear, Keys & Springs |
AX15 |
1984-96
|
$139.92
|
| ALT4637535 |
5th C/S Gear 47T thru Ass#00705123 |
AX15 |
|
$136.52
|
| ALT5252083 |
5th Gear Main Shaft 25T |
AX15 |
|
$56.08
|
| TRS462819 |
Reverse Idler Gear, 23T |
AX15 |
|
$92.94
|
| TRS462841 |
1-2 Shift Fork |
AX15 |
|
$56.36
|
| TRS462843 |
3-4 Shift Fork |
AX15 |
|
$46.45
|
| TRS462845 |
5th Shift Fork |
AX15 |
|
$49.72
|
| TRS462641 |
1-2 Sync Slider |
AX15 |
|
$114.19
|
| ALT83506075 |
1st Gear Needle Bearing |
AX15 |
|
$31.69
|
| ALT83506076 |
2nd Gear Needle Bearing |
AX15 |
|
$20.16
|
| ALT83506077 |
3rd Gear Needle Bearing |
AX15 |
|
$17.86
|
| ALT83506078 |
Pocket Bearing |
AX15 |
|
$18.68
|
| ALT83506079 |
5th Counter Shaft Needle Bearing |
AX15 |
|
$27.84
|
| ALT83506247 |
1-2 Sync Inner Hub |
AX15 |
|
$87.90
|
| ALT83506248 |
3-4 Sync Inner Hub |
AX15 |
|
$80.82
|
| ALT83506249 |
3-4 Sync Slider |
AX15 |
|
$80.56
|
| ALT5252081 |
Input Shaft, 29T .590 Pilot Dia. 10 Spline
|
AX15 |
|
$129.98
|
| ALT5252085 |
Cluster Gear 43-32-21-R13-12, 86-91 |
AX15 |
|
$395.69
|
| ALT83500629 |
Switch, Backup Light fits AX5 and AX15 |
2 Prong with wires |
|
$76.20
|
| 301485 |
Cluster Gear |
AX15 |
1989-91
|
$343.65
|
| 301486 |
Input Shaft Gear |
AX15 with .753" Outer Diameter Pilot
Tip |
1992-97
|
$226.67
|
| 301487 |
Cluster Gear |
AX15 |
1992-97
|
$327.50
|
| TRS57066A |
Extension Housing Bushing 1.500" ID
|
2WD AX5
|
1984-97
|
$6.38
|
|
Note: Check Tag to Component
Identification Chart to verify proper gear and/or kit application. |
|
|
|
For a replacement high quality remanufacture transmissions see manual
transmissions These units have a 12 month, unlimited mile warranty. In
addition some information is provide relative to possible transmission conversions.
Detailed application guide to help you answer the question"What transmission do I have?" Select from the following links to take you to the detailed manual transmission model information on your specific vehicle, model year and number of speed transmission in your vehicle.
|