spacer.png, 0 kB
search_corner, 0 kB




  

facebook-button.jpeg

Become a friend of www.drivetrain.com.

Register on our Facebook page and qualify for

$10.00 Discount on next order over $100.00! 

 

We are one of a few web sites that publish prices.

Prices listed may not be current, we do attempt to keep pricing current.

Please ask your sales person at the time of the order to confirm price, including S&H charges.

To stay competitive and offer you the best prices, all returns require prior authorization.
Sorry, no returns after 14 days.


 


 

 



spacer.png, 0 kB
Dana 35 Rear End Ring and Pinion Sets & Parts Print E-mail

dana35_small.jpg

 
   
 
laptopcomputergearratio.jpg Having problems with Dana 35 rear end?  We offer a complete line of rear end parts including ring and pinions, bearing overhaul kits, positractions and open carriers for the DANA 35 front and rear differentials. dana35ring_pinionkit.jpgYou can purchase high quality ring and pinion sets in various ratios, high quality bearing rear end bearing overhaul kits including pinion bearings, pinion seal, crush sleeve, pinion nut, shims, ring gear bolts, marking compound and gasket. Chrysler utilized this differential in their Jeep line starting in 1984 including the Wagoneer, Cherokee, Comanche, Wrangler and Scrambler.  Ford applications included the Explorer, Bronco II and Ranger fronts starting in 1990. Our inventory includes ring gear and pinion sets, including aftermarket and OE gear sets. We are able to supply axles, carriers, cases, spider and side gears.   Positraction units we offer include Lockrights by Powertrax, Auburn, Detroit Lockers, Trac Loc and ARB air lockers.  We are a Dana Spicer volume distributor and offer a complete line or ring gear and pinions and differential repair parts from the small 7.5-inch differential to the large Dana 80.  Don't see what you need give us a call 800-216-1632 and let us help save you some money!

jeeppurple_small.jpg

Along with our quality parts you have access to applications information for available ring and pinion ratios, information to assist you in identification of the differential that you have. Free information for ring and pinion installation.  We also supply setup specifications  and carrier/case breaks when you are considering gear ratio changes. You can review applications available to assist you with selection of the specific positraction unit that you may need to improve your performance.

Ring and Pinions Sets, Bearing Kits, Internal Parts Kit, Empty and Loaded CasesTrac Loc Positractions, Positraction Clutch Plate KitsAxle ShaftsMisc Rear End Parts Aftermarket Positraction Units, and Misc Parts

Purchase the parts at drivetrain.com and receive free telephone installation technical support!

Yes real technicians with many years experience, not just a salesperson.

Other Dana Differential Information

This series of Dana/Spicer axles are identified with a manufacturing date (1) and Bill of Material number 1/8" high metal stamp (2) stamped on the right or left hand tube on driving axles. The Bill of Material number may also be found on the carrier in some models as shown in illustration (2A). For independent front suspension (IFS) axles, the B/M number may be located at one of three locations: 1). A vertically positioned tag near the center of the rightdana_how_to_id.jpg hand side support arm, 2) stamped into the left hand side support arm (opposite end of the camber adjuster), or 3) stamped into the "nose end" of the axle carrier. The location of the information will depend on the manufacturing date of the axle.  The axle model number will be cast into one of the webs as shown (3), or it can be on the nose.  Each axle contains a gear ratio tag (4), and if the axle is equipped with a limited slip differential, it will have a tag specifying the type of limited slip lubricant to be used (5).

With this number we can tell you exactly what components the factory used in the assembly of your differential.  You can also the following link below to research exactly what parts you need, following step 1 and then step 2 and then enter your bill of material number:bill_of_material_instruction.jpg  You will see a detailed list of parts and part numbers for your application.

You get the right parts the first time!  Once you know the bill of material number give us a call or down load and refer to the appropriate parts catalog listed for your bills of material number.  The parts catalog contains exploded views, parts listings, bill of material tables, and variable parts tables for each series is listed below to help you identify the parts you need:

Model

Year


Model

Year

Jeep Cherokee

84 & Up


Ford Explorer, Bronco II, Front 4.0L

90-1/2-

95

Comanche

86 & Up


Scrambler

84 & Up


Wrangler

84-00


Ranger Front 4.0L

90-1/2-Up

Wagoneer

84-97




Cherokee XJ

84-93, 94-97

94-00 Frt.

     
Grand Cherokee ZJ

93-00




Dana 35 Parts Illustrations with parts listing.

 

SPECIFICATIONS

dana35silo_small.jpg

7.562"
10 HOLES
OVAL Gasket Patter


  • Ring Gear Diameter 7.562"
  • 8 3/8" X 24 RH Threaded Bolts
  • PINION Diameter 1.406", 26 Spline

    CASE: 3.31 & Down, 3.55 & Numerically Higher Jeep, No case change on Ford

    8620 Material Heat-Treated

    Assembly Specifications:

  • Cover Bolt Ft. Lbs. 30-40
  • Pinion Brg. Preload In. Lbs 15-35
  • Pinion Brg. Preload In. Lbs 8-14 Used
  • Ring Gear Backlash .005-.008
  • Ring Gear Bolt to case Ft. Lbs. 70-89
  • Side Brg. Caps Ft. Lbs. 47-67

RING AND PINION
75136-5X Drive Pinion & Gear 3.54 RATIO, 26 SPLINE PINION RING & PINION ONLY $215.37 DANA 35 RING AND PINION
75137-5X Drive Pinion & Gear 3.73 RATIO, 26 SPLINE PINION RING & PINION ONLY $184.53
73442-5X GEAR SET 3.07 RATIO, 26 SPLINE PINION RING & PINION ONLY $192.04
73386-5X GEAR SET 3.55 RATIO, 26 SPLINE PINION FRONT RING & PINION ONLY $176.04
73404-5X GEAR SET 4.10 RATIO-REVERSE, 26 SPLINE PINION FRONT RING & PINION ONLY $219.98
73383-5X GEAR SET 4.11 RATIO, 26 SPLINE PINION RING & PINION ONLY $231.94
73382-5X GEAR SET 4.56 RATIO, 26 SPLINE PINION RING & PINION ONLY $297.54  
707244-1X RING & PINION 3.07 KIT   $265.35 DANA 35 RING AND PINION KIT
707359-4X RING & PINION KIT 1995 Explorer - Disconnect- CV FRONT $256.96
707244-3X RING & PINION KIT 3.55 RATIO, 26 SPLINE PINION   $220.83
707244-7X RING & PINION KIT 3.55 RATIO, 26 SPLINE PINION 1993-94 ZJ - ABS $254.56
707359-2X RING & PINION KIT 3.55 RATIO, 26 SPLINE PINION, CRUSH SLEEVE DESIGN 1995 Explorer - Disconnect- CV FRONT $236.49
707244-8X RING & PINION KIT 3.73 RATIO, 26 SPLINE PINION   $225.49  
707244-4X RING & PINION KIT 4.11 RATIO, 26 SPLINE PINION   $271.40

Your gears run cooler and last longer!

Order above high performance synthetic oil and friction additive combo kit at time of order for ring and pinion or bearing overhaul kit and pay only $49.95 plus S&H, a $54.00 value.
 
707244-5X RING & PINION KIT 4.56 RATIO, 26 SPLINE PINION FRONT $269.74
707359-5X RING & PINION KIT 4.56 RATIO, 26 SPLINE PINION, IFS   $357.80
80613-6 RING & PINION SET 4.11 (37 - 09) RING & PINION ONLY $316.58
707359-3X RING AND PINION KIT 3.73 RATIO, 26 SPLINE PINION, CRUSH SLEEVE DESIGN KIT 1995 Explorer - Disconnect- CV FRONT $238.30
707359-1X GEAR SET KIT - 73909 1995 Explorer - Disconnect- CV FRONT $331.22
84118-5 GEAR SET KIT 3.07 (43 - 14)   $213.25
85071-5 GEAR SET W/SM PTS 4:56 (41-09) KIT 2 TJ REAR $311.14

dialindicator_base_regular.jpg

Ring & Pinion Set up tool.  Your cost $48.98 + S&H.

 
Bearings
     
SA35-2065 
Bearing/Overhaul Kit Ford    $140.67
DTSR35FRMK 
Installation Kit Ford Rev.    $140.90
DTR35JRMK
Bearing/Overhaul Kit Jeep Rear
  $99.29
SA25-2049
Installation Kit Jeep Rear
  $62.00
706016X
Carrier Bearing 2 req.
  $38.65
706894X
Outer Pinion Bearings
  $19.79
 

dana35_illustration.jpg

 
spacer.png, 0 kB
spacer.png, 0 kB
Copyright © 2011 - drivetrain.com. All rights reserved. Site created and maintained by LERCH Design
spacer.png, 0 kB