spacer.png, 0 kB
search_corner, 0 kB




  

facebook-button.jpeg

Become a friend of www.drivetrain.com.

Register on our Facebook page and qualify for

$10.00 Discount on next order over $100.00! 

 

We are one of a few web sites that publish prices.

Prices listed may not be current, we do attempt to keep pricing current.

Please ask your sales person at the time of the order to confirm price, including S&H charges.

To stay competitive and offer you the best prices, all returns require prior authorization.
Sorry, no returns after 14 days.


 


 

 



spacer.png, 0 kB
Dana 60 Rear End Ring and Pinion Sets Print E-mail

 Dana 60 OE Genuine Ring and Pinion Replacements or Ratio Change   Need Other Dana 60 Rear End Parts (not ring and pinion)

  Having problems with Dana 60 rear end?  At drivetrain.com we offer a complete line of rear end parts including ring gear and pinions for the DANA 60 differential. You can purchase high quality ring and pinion sets in various ratios, high quality bearing rear end bearing overhaul kits including pinion bearings, pinion seal, crush sleeve, pinion nut, shims, ring gear bolts, marking compound and gasket. Chrysler utilized this differential in their muscle car line starting in 1966 to 1973 and Jeep J10 lines starting in 1966. In 1969 the DANA 60 were used in the Dodge truck series W200 and W250 and are still used in some later model Ram trucks. Ford applications F-100, F250 and F-350 starting in 1967. dana60ring_pinionkit.jpg GM used this very popular differential in their C20 and C30 pickups from 1977 to 1992.

Our inventory includes OE ring gear and pinion sets, aftermarket ring and pinions sets, bearing and shim rebuild kits, internal parts kit (spider and side gears), positraction repair kits (clutch plates)and OE Positractions.  We are also able to supply axles , carriers, cases, both empty and loaded cases.  Shafts, spindels  and yokes.   Aftermarket Positraction units we offer include Lockrights by Powertrax, Detroit LockersEaton and ARB air lockers.

We are a Dana Spice volume distributor and offer a complete line or ring gear and pinions up to and including the large Dana 80 differential. Specifications are provided below to assist you in the setup including torque spec.’s required for rebuilding your Dana 60 differential.

Along with our quality parts you have free access to applications information for available ring and pinion ratios, information to assist you in identification of the differential that you have. Free information for ring and pinion installation is provided alone with specification and carrier/case breaks when you are considering gear ratio changes. You can review applications available to assist you with selection of the specific positraction unit that you may need to improve your performance.

The Dana/Spicer 44 axles are identified with a manufacturing date (1) and Bill of Material number 1/8" high metal stamp (2) stamped on the right or left hand tube on driving axles. The Bill of Material number may also be found on the carrier in some models as shown in illustration (2A). For independent front suspension (IFS) axles, the B/M number may be located at one of three locations: 1). A vertically positioned tag near the center of the rightdana_how_to_id.jpg hand side support arm, 2) stamped into the left hand side support arm (opposite end of the camber adjuster), or 3) stamped into the "nose end" of the axle carrier. The location of the information will depend on the manufacturing date of the axle.  The axle model number will be cast into one of the webs as shown (3), or it can be on the nose.  Each axle contains a gear ratio tag (4), and if the axle is equipped with a limited slip differential, it will have a tag specifying the type of limited slip lubricant to be used (5).

With this number we can tell you exactly what components the factory used in the assembly of your differential.  You can also the following link below to research exactly what parts you need, following step 1 and then step 2 and then enter your bill of material number:bill_of_material_instruction.jpg  You will see a detailed list of parts and part numbers for your application.

You get the right parts the first time!  Once you know the bill of material number give us a call or down load and refer to the appropriate parts catalog listed for your bills of material number.  The parts catalog contains exploded views, parts listings, bill of material tables, and variable parts tables for each series is listed below to help you identify the parts you need:

Purchase the parts at drivetrain.com and receive free installation technical support by telephone!

Yes real technicians with many years experience, not just a salesperson.  Ring and pinion installation instructions

Information on other Dana differentials:


Applications
Model

Year


Model

Year

Dodge & Plymouth Cars w/Hemi Engines

66-73


Chevrolet C30/C35 Front

77-95

Ford E250-E350

82-92


Chevrolet C20/C25 Rear 80-92
Ford F100 Rear

67-85


Chrysler W200/W250 Front & Rear 69-93
Ford F150

67-85


Jeep J10 Rear

66-93

Ford F250 Front & Rear

67-92




Ford F350 Front & Rear 78-92



Purchase your parts @ drivetrain.com and receive telephone access to experienced differential technician to assist you with installation, we help you solve the problem.

motivegear_ligduty_large.jpg

 

vertstrip_large.jpg

 

dana60silo_small.jpg

10-3/4 X 11-1/2"
10 HOLES
OVAL Gasket Pattern

spicerdiamond_smallsmall.jpg

Specifications
  • Ring Gear Diameter 9.75"
  • 12 1/2" X 18 RH Threaded Bolts
  • PINION Diameter 1.626", 29 Spline

    CASE: 4.10 & Down, 4.56 Numerically Higher

    8620 Material Heat-Treated

    Assembly Specifications:

  • Cover Bolt Ft. Lbs. 30-40
  • Pinion Brg. Preload In. Lbs 20-40
  • Pinion Nut Ft. Lbs. 240-300
  • Ring Gear Backlash .004-.009
  • Ring Gear Bolt to case Ft. Lbs. 100-120
  • Side Brg. Caps Ft. Lbs. 80-90

The Dana/Spicer 60 axles are identified with a manufacturing date (1) and Bill of Material number 1/8" high metal stamp (2) stamped on the right or left hand tube on driving axles. The Bill of Material number may also be found on the carrier in some models as shown in illustration (2A). For independent front suspension (IFS) axles, the B/M number may be located at one of three locations: 1). A vertically positioned tag near the center of the rightdana_how_to_id.jpg hand side support arm, 2) stamped into the left hand side support arm (opposite end of the camber adjuster), or 3) stamped into the "nose end" of the axle carrier. The location of the information will depend on the manufacturing date of the axle.  The axle model number will be cast into one of the webs as shown (3), or it can be on the nose.  Each axle contains a gear ratio tag (4), and if the axle is equipped with a limited slip differential, it will have a tag specifying the type of limited slip lubricant to be used (5).

With this number we can tell you exactly what components the factory used in the assembly of your differential.  You can also the following link below to research exactly what parts you need, following step 1 and then step 2 and then enter your bill of material number:bill_of_material_instruction.jpg  You will see a detailed list of parts and part numbers for your application.

You get the right parts the first time!  Once you know the bill of material number give us a call or down load and refer to the appropriate parts catalog listed for your bills of material number.  The parts catalog contains exploded views, parts listings, bill of material tables, and variable parts tables for each series is listed below to help you identify the parts you need:
halfinchhhorzstrip_large.jpg
Genuine DANA/SPICER RING AND PINIONS        
706807-3X   DR GEAR & PINION ASS 3.54 (46 - 13)     $518.62  
dana 60_ring & pinion
706807-4X   DR GEAR & PINION ASS 4.10 (41 - 10)     $506.04
708009-1   DRIVE GEAR & PINION 3.54 RATIO, 29 SPLINE PINION, CRUSH SLEEVE STYLE 1994-94 1/2 W2500 HD INCLUDES SMALL PARTS $470.20
708009-4   DRIVE GEAR & PINION 4.10     $451.62
24813-5X   GEAR SET 3.54   RING & PINION ONLY $289.81
76088-5X   GEAR SET 3.54 RATIO, 29 SPLINE PINION   RING & PINION ONLY $252.11
25538-5X   GEAR SET 3.73   RING & PINION ONLY $302.00  
24807-5X   GEAR SET 4.10   RING & PINION ONLY $319.88  
25127-5X   GEAR SET 4.56   RING & PINION ONLY $245.64  
707475-3X   GEAR SET KIT - 76160 4.30 RATIO-REVERSE, 29 SPLINE PINION, 4.10 & DOWN CARRIER INCLUDES SMALL PARTS $297.19  
707475-1X   GEAR SET KIT - 76161 3.73 RATIO, REVERSE ROTATION   INCLUDES SMALL PARTS $281.22  
707475-5X   GEAR SET KIT - 761645.38 RATIO-REVERSE, 29 SPLINE PINION, 4.56 & UP CARRIER INCLUDES SMALL PARTS $337.41
dana 60 ring and pinion kit
706834-2X   GEAR SET KIT 3.54 RATIO, 29 SPLINE PINION   INCLUDES SMALL PARTS $524.50
700020-1   GEAR SET KIT 3.54 REVERSE CUT   INCLUDES SMALL PARTS $367.53
706033-1X   GEAR SET KIT 3.54, 29 Spline Pinion   INCLUDES SMALL PARTS $334.95
706834-3X   GEAR SET KIT 3.73 RATIO, 29 SPLINE PINION   INCLUDES SMALL PARTS $410.38
706033-2X   GEAR SET KIT 3.73, 29 Spline Pinion   INCLUDES SMALL PARTS $351.87
706834-4X   GEAR SET KIT 4.10 RATIO, 29 SPLINE PINION   INCLUDES SMALL PARTS $523.04
706033-3X   GEAR SET KIT 4.10, 29 Spline Pinion   INCLUDES SMALL PARTS $334.95
706033-4X   GEAR SET KIT 4.56, 29 Spline Pinion   INCLUDES SMALL PARTS $335.61  
706033-6X   GEAR SET KIT 5.86, 29 Spline Pinion   INCLUDES SMALL PARTS $349.56  
706033-7X   GEAR SET KIT 6.17, 29 Spline Pinion Front   INCLUDES SMALL PARTS $339.87  
706033-8X   GEAR SET KIT 7.17, 29 Spline Pinion Front   INCLUDES SMALL PARTS $345.05  
75185-5X   GEAR SET W/SMALL PAR 3.54 RATIO, 29 SPLINE PINION, CRUSH SLEEVE DESIGN INCLUDES SMALL PARTS $416.32  
75248-5X   GEAR SET W/SMALL PAR 4.10 RATIO, 29 SPLINE PINION, CRUSH SLEEVE DESIGN INCLUDES SMALL PARTS $278.99  
76159-5X   GEAR SET   INCLUDES SMALL PARTS $360.36  
706033-16X   RING & PINION KIT   1995-96 E-350 Van SRW - Full Float - ABS INCLUDES SMALL PARTS $459.44  
706033-15X   RING & PINION KIT 3.54, 29 Spline Front   INCLUDES SMALL PARTS $341.49  
708125-6   RING & PINION KIT 3.55 RATIO, 29 SPLINE PINION   1997 1/2 E-350 Van SRW - Full Float - ABS FORD REAR INCLUDES SMALL PARTS $314.30  
2007117   RING & PINION KIT 3.73   2000 F-350 DRW (4x4) FRONT INCLUDES SMALL PARTSPARTS $591.82  
708125-4   RING & PINION KIT 3.73 RATIO, 29 SPLINE PINION   1997 1/2 E-250 Van SRW - Semi Float - ABS INCLUDES SMALL PARTS $274.19  
708021-1   RING & PINION KIT 4.09 RATIO, 29 SPLINE PINION   1998 B-300 Van - w/ABS INCLUDES SMALL PARTS $463.62  
708233-2   RING & PINION KIT 4.10 (41 - 10)   INCLUDES SMALL PARTS $296.86  
708125-5   RING & PINION KIT 4.10 RATIO, 29 SPLINE PINION   1997 1/2 E-250 Van SRW - Semi Float - ABS FORD REAR INCLUDES SMALL PARTS $274.19  
708009-2   RING & PINION KIT 4.10 RATIO, 29 SPLINE PINION, CRUSH SLEEVE STYLE 1994-94 1/2 W2500 HD INCLUDES SMALL PARTS $325.51  
708123-3   RING & PINION KIT 4.30 RATIO, 29 SPLINE PINION, REVERSE ROTATION FRONT INCLUDES SMALL PARTS $310.30  
708123-4   RING & PINION KIT 4.88 RATIO, 29 SPLINE PINION, REVERSE ROTATION, FITS 4.56 & UP CARRIER FRONT INCLUDES SMALL PARTS $336.59  
708123-5   RING & PINION KIT5.38 RATIO, 29 SPLINE PINION, REVERSE ROTATION, FITS 4.56 & UP CARRIER INCLUDES SMALL PARTS $341.78  
76089-5X   RING & PINION SET 3:73 (41-11)     $391.34  
660069-5   RING & PINION SET 3.54     $474.85  
707430-1X   RING & PINION SET 3.54 RATIO, 29 SPLINE PINION   INCLUDES SMALL PARTS $294.55  
74423-5X   RING & PINION SET 4:09 (45-11)     $430.04  
707475-2X   RING & PINION SET 4.10 RATIO-REVERSE, 29 SPLINE PINION, 4.10 & DOWN CARRIER INCLUDES SMALL PARTS $297.87  
707430-3X   RING & PINION SET 4.10 RATIO, 29 SPLINE PINION   1998 1/2-99 E-350 Van SRW - Full Float - ABS INCLUDES SMALL PARTS $374.28  
76047-5X   RING & PINION SET 4.10 RATIO, 29 SPLINE PINION   RING & PINION ONLY $207.18  
707424-2X   RING AND PINION SET 3.73 RATIO, 29 SPLINE PINION   INCLUDES SMALL PARTS $307.05  
700020-2   RING GR & PINION 4.10 REVERSE CUT   INCLUDES SMALL PARTS $88.89  
707475-4X   KIT - DRIVE GEAR & PINION 4.88 RATIO-REVERSE, 29 SPLINE PINION, 4.56 & CARRIER INCLUDES SMALL PARTS $386.47  
             
 Motive Gear High Quality Aftermarket Gear Sets      
MWD60-354
  Ring & Pinion Kit
3.54
46-13
$205.00
 
MWD60-410
  Ring & Pinion Kit
4.10
41-10 $195.00
 
MWD60-410F
  Ring & Pinion Kit
4.10 Rev
41-10 $205.00 
 
MWD60-513
  Ring & Pinion Kit
5.13   $195.00 
 
MWD60-513XF
  Ring & Pinion Kit
5.13 
Rev Thick 
$245.00 
 
MWD60-456XF
  Ring & Pinion Kit 4.56
Rev Thick $245.00
 
MWD60-488XF
  Ring & Pinion Kit 4.88
Rev Thick  39-8 $245.00
 
             
BEARING & SHIM KITS        
MWRA29RMK
  BEARING KIT AFTERMARKET
      $ 118.48  
707431X   DIF & PIN SHIM KIT     $229.89  
706047X 
  CARRIER BEARING 7 RACE KIT
      $ 55.86  
707426X   MASTER SHIM KIT - DIFF & PINION   FORD $36.78  
706359X   SHIM KIT   FORD FRONT $41.42  
             
 
spacer.png, 0 kB
spacer.png, 0 kB
Copyright © 2011 - drivetrain.com. All rights reserved. Site created and maintained by LERCH Design
spacer.png, 0 kB