Problems with your Isuzu Amigo or Rodeo's suspension sagging, have handling problems lost
it's load carrying capability provide uncomfortable ride these are some common
concerns for vehicle owners with standard suspension. Our OME & ARB products
address these problems our engineers have developed suspension systems that
cater to your specific vehicle characteristics. Our renowned team of engineers,
who design and test every element of the suspension system - a practice unique
to our products. Our kits include carefully matched spring and shock combinations
engineered to improve vehicle ride quality, handling and control under various
loads. We recommend you change both shock and springs at the same time. Special
attention is given to improving suspension travel without adversely affecting
driveline and steering geometry. In most cases, multiple spring rates and shock
valving characteristics are available for each application to accommodate vehicle
variations and driving preferences. Although ride height and tire size are taken
into consideration with each system, the emphasis is placed on vehicle performance
and versatility.
By installing a fully integrated 4x4 suspension system, you can dramatically improve
the safety and handling of your vehicle. Old Man Emu
manufactures these suspension replacement parts in Australia. These suspension parts
are designed to replace the original factory springs, shocks, polyurethane bushings,
steering stabilizer for some application Ubolts and shackles, greasable shackles
& pins are available. Old Man Emu components are designed to use your existing
mounts.
| You purchase our EMU Nitrocharge Shock Absorbers and you
get: |
| |
- Giant 18mm Chromed Shaft - Indestructible for rugged off roading.
Induction hardened then hard chromed to a superfine finish.
-
Nitrogen Gas - The gas pressure keeps the oil cohesive under all conditions.
-
Twin Tube Design - New 33% thicker outer tube insures that rocks do not damage internal
operating components. This design also allows for a greater volume of oil which keeps
the shock cooler.
-
35MM Seven Stage Compression Valve - Delivers all the subtleties of compression rates
for the best ride and handling.
-
Check Valve Seal - The latest in seal technology, this shaft seal significantly improves
gas retention while offering excellent longevity.
-
Glacier Bush - A Teflon coated rod guide bushing significantly reduces heat build
up in the god guide area, developed for the Emu? off road racing program.
-
Giant 35mm Teflon Banded Piston - A new four stage coil sprung rebound valve system
to control vehicle bounce.
-
Supplementary Welds - On all mounting eves and pins for maximum shock absorber mount
strength.
-
Stoneguard - Protects oil seal and piston rod against stone and dirt damage.
Warranty - 2 year 25,000 mile warranty for material and workmanship. |
| You purchase our advance designed EMU Coil Springs and you
get: |
| |
Shot Peened Coils - To reduce stress, which greatly enhance
spring life.
Double Scragged - To eliminate spring sag.
Variable and Constant rate - Designs used to obtain optimum ride comfort and load
carrying capabilities. |
| You purchase our ARB advance designed Leaf Springs and you
get: |
| |
Flat axle seat area - Lowers spring stress while retaining
spring free camber height. Unique our springs.
Anti Friction Inter Leaf Liners - Used where applicable to reduce friction between
spring leaves giving better ride comfort and increase spring life.
Shot Peened - On the tension side of all leaves to double spring life.
Draw Tapered and Diamond Cut Leaves - For reduced interleaf friction and improved
load distribution in the load bearing area.
Graphite Coated - For further reduced friction.
Military Wrapped - For extra safety (where installation permits).
Loose Clamped - For smoother and quiet operation |
| You purchase our advance designed Urethane Bushings and
you get: |
| |
Premium Grade -Not all bushings are the same EMU bushings
are precision molded in captive molds to ensure exact tolerances for longer bushing
life.
Unique EMU Design ? Clever lip seal and shoulder design prevents dirt penetrating
between bushing shoulder and shackle face. |
| With EMU's Steering Dampers Feature the following advance
design you get: |
| |
Coil Sprung 9 Stage Valving - For optimum performance
35mm Piston and Bore - Grater oil volume giving better damper performance.
Twin Tube Design - Protects the internal components against stone damage.
Steel Stoneguard - Protects the piston rod against stone damage.
Foam Cell - Keeps the oil at the valving to prevent fade.
Original Mounts - All mounts are of similar design to original dampers for ease of
INSTALLATION |
In addition to providing lifts our suspension enhances ride quality, articulation
and longevity. Package includes polyurethane bushings springs, greasable shackles
& pins, gas shocks and steering stabilizer (sway bar extenders when applicable).
Below you will find information and suspension products for Amigo and Rodeo
5 door models, for this application we provide front shocks, and for the rear
medium load rated coil springs with .75 inches of lift. For the Amigo early
models to 1996 we provide shocks for the front and for the rear leaf springs
heavy duty constant load rating and .75 inches of lift.
Benefits of selecting OME for your application are: 
Consistency OME coil springs are formed on precision mandrels and manufactured
to the highest standards. A scragging process is performed before and after
the coils are shot peened to reduce stress and prevent sagging.
Diversity Constant and variable rate coils are available to suit a wide
variety of applications ? even those you thought were impossible.
Quality Coil spring end configurations are designed to exact specifications
guaranteeing perfect fitment to your vehicle, while a durable powder coat finish
provides a quality appearance for years.
Advanced engineering and manufacturing technology bring better suspension
performance to your Isuzu
Drivetrain.com suspension systems include carefully matched
spring and shock  combinations engineered to improve vehicle ride quality,
handling and control under various loads. We recommend you change both
shock and springs at the same time. Special attention is given to improving
suspension travel without adversely affecting driveline and steering geometry.
In most cases, multiple spring rates and shock valving characteristics
are available for each application to accommodate vehicle variations and
driving preferences. Although ride height and tire size are taken into
consideration with each system, the emphasis is placed on vehicle performance
and versatility.
Below you will find detailed application information on both the front and rear suspension
parts, springs, shocks and accessories components for your specific vehicle. You
will note that springs and shocks are provided for different load rating, to support
your specific application, allowing you the additional capability if you have changed
the engine, installed a larger bumper or winch. If you haul heavier loads or you
just want to replace the sagging OEM springs the Old Man Emu components are for you. |
| AMIGO/RODEO
5 DOOR COIL SPRING MODELS 1998-2002 |
Approx. Lift |
Part No.
|
Price Each
|
Weight Each
|
| FRONT |
|
|
|
|
| Stock/Light Load |
|
|
|
|
| Spring |
|
N/A (1)
|
|
|
| Shock |
|
*N65/N26F
|
$107.92 each
|
8
|
| |
|
|
|
|
| REAR |
|
|
|
|
| Medium Load (0lbs to GVM) |
|
|
|
|
| Coil Spring |
.75"
|
OME913
|
$84.74 each
|
12
|
| Shock |
|
N102
|
$107.92 each
|
8
|
| (1) Adjust front torsion bar for additional height after installing
rear springs. Set ride height to 1/3 upper bump stop clearance and 2/3 lower bump
stop clearance. |
| |
|
|
|
|
| AMIGO LEAF
SPRING MODELS TO 1996 |
|
|
|
|
| FRONT |
|
|
|
|
| Stock/Light Load |
|
|
|
|
| Spring |
|
N/A (1)
|
|
|
| Shock |
|
*N65/N26F
|
$107.92 each
|
8
|
| |
|
|
|
|
| REAR |
|
|
|
|
| Heavy Constant Load (400lbs to GVM) |
|
|
|
|
| Leaf Spring |
.75"
|
CS028R-OMEROD11 (4)
|
$186.42 each
|
25
|
| Shock |
|
*N42/N89
|
$107.92 each
|
8
|
| |
|
|
|
|
| TO COMPLETE INSTALLATION |
|
|
|
|
| Leaf Spring Bushing Kit |
|
OMESB80
|
$31.77 each
|
1
|
| U Bolts |
|
OMEU59A (3)
|
$15.13 each
|
2
|
| Anti Inversion Kit |
|
FK14
|
$17.50 each
|
1
|
| |
|
|
|
|
| OPTIONAL ACCESSORIES |
|
|
|
|
| Greasable Shackle Kit |
|
OMEGS3
|
$121.10 each
|
6
|
| Rear Extra Leaf |
|
RODXL (2)
|
$28.09 each
|
7
|
| Remarks: |
|
|
|
|
| (1) Adjust front torsion bar for additional height after installing
rear springs. Set ride height to 1/3 upper bump stop clearance and 2/3 lower bump
stop clearance. |
| (2) Extra leaf can be fitted for heavier constant load carrying
ability |
| (3) Vehicles with 4 leaf OE spring pack require OMEU59A U Bolts. |
| (4) For Stock/Light load applications, the 3rd leaf from the
top of the spring pack can be removed for improved ride comfort. See Page 58 for
instructions. |
| * First part number gives firmer ride for: FRONT- Increased
axle weight eg: diesel, bullbar, winch. REAR- regular load carriers and those who
prefer a positive feel. |
Other Suspension Systems:
We offer a complete line of steering and suspension products for your vehicle, check out other products we offer at the following links:
|
Suspension and Steering 
