Landcruiser 40 & 42 Series all Short Wheel Base Fully integrated 4x4 suspension systems improve your suspension!
Having problems with your Toyota Landcruiser's series 40 or 42 suspension sagging? Does the Toyota
Landcruiser have handling problems and an uncomfortable ride these can be common
concerns for vehicle owners with standard suspension. Our OME like products
address these problems engineers have developed suspension systems that cater
to your specific vehicle characteristics. OME like does this via their renowned
team of engineers, who design and test every element of the suspension system
- a practice unique to OME like. Our kits include carefully matched spring and
shock combinations engineered to improve vehicle ride quality, handling and
control under various loads. We recommend you change both shock and springs
at the same time. Special attention is given to improving suspension travel
without adversely affecting driveline and steering geometry. In most cases,
multiple spring rates and shock valving characteristics are available for each
application to accommodate vehicle variations and driving preferences. Although
ride height and tire size are taken into consideration with each system, the
emphasis is placed on vehicle performance and versatility.
By installing a fully integrated 4x4 suspension system, you can dramatically improve
the safety and handling of your vehicle. Old Man Emu
manufactures these suspension replacement parts in Australia. These suspension parts
are designed to replace the original factory springs, shocks, polyurethane bushings,
steering stabilizer for some like application Ubolts and shackles, greasable shackles
& pins are available. Old Man Emu components are designed to use your existing
mounts.
You purchase our EMU Nitrocharge Shock Absorbers and
you get:
Giant 18mm ChrOME liked Shaft — Indestructible for rugged
off roading. Induction hardened then hard chrome liked to a superfine finish.
Nitrogen Gas — The gas pressure keeps the oil cohesive under all conditions.
Twin Tube Design — New 33% thicker outer tube insures that rocks do not damage internal
operating components. This design also allows for a greater volume of oil which keeps
the shock cooler.
35MM Seven Stage Compression Valve — Delivers all the subtleties of compression rates
for the best ride and handling.
Check Valve Seal — The latest in seal technology, this shaft seal significantly improves
gas retention while offering excellent longevity.
Glacier Bush — A Teflon coated rod guide bushing significantly reduces heat build
up in the god guide area, developed for the Emu” off road racing program.
Giant 35mm Teflon Banded Piston — A new four stage coil sprung rebound valve system
to control vehicle bounce.
Supplementary Welds — On all mounting eves and pins for maximum shock absorber mount
strength.
Stoneguard — Protects oil seal and piston rod against stone and dirt damage.
Warranty — 2 year 25,000 mile warranty for material and workmanship.
You purchase our advance designed ARB Dakar Leaf Springs
and you get:
Flat axle seat area — Lowers spring stress while retaining
spring free camber height.
Anti Friction Inter Leaf Liners — Used where applicable to reduce friction between
spring leaves giving better ride comfort and increase spring life.
Shot Peened — On the tension side of all leaves to double spring life.
Draw Tapered and Diamond Cut Leaves — For reduced interleaf friction and improved
load distribution in the load bearing area.
Graphite Coated — For further reduced friction.
Military Wrapped — For extra safety (where installation permits).
Loose Clamped — For smoother and quiet operation.
You purchase our advance designed Urethane Bushings and
you get:
Premium Grade — Not all bushings are the same EMU bushings
are precision molded in captive molds to ensure exact tolerances for longer bushing
life.
Unique EMU Design — Clever lip seal and shoulder design prevents dirt penetrating
between bushing shoulder and shackle face.
With EMU's Steering Dampers Feature the following advance
design you get:
Coil Sprung 9 Stage Valving — For optimum performance
35mm Piston and Bore — Grater oil volume giving better damper performance.
Twin Tube Design — Protects the internal components against stone damage.
Steel Stoneguard — Protects the piston rod against stone damage.
Foam Cell — Keeps the oil at the valving to prevent fade.
Original Mounts — All mounts are of similar design to original dampers for ease of
INSTALLATION.
In addition to providing lifts these suspension components enhances ride quality,
articulation and longevity. Package includes polyurethane bushings springs, greasable
shackles & pins, gas shocks and steering stabilizer (sway bar extenders when
applicable). Below you will find information and suspension products for Toyota Landcruiser
leaf springs and shocks.
Our ARB & Old Man Emu suspension systems include carefully matched spring and
shock combinations engineered to improve vehicle ride quality, handling and control
under various loads. We recommend you change both shock and springs at the same time.
Special attention is given to improving suspension travel without adversely affecting
driveline and steering geometry. In most cases, multiple spring rates and shock valving
characteristics are available for each application to accommodate vehicle variations
and driving preferences. Although ride height and tire size are taken into consideration
with each system, the emphasis is placed on vehicle performance and versatility.
Below you will find detailed application information on both the front and rear suspension
parts, springs, shocks and accessories components for your specific vehicle. You
will note that springs and shocks are provided for different load rating, to support
your specific application, allowing you the additional capability if you have changed
the engine, installed a larger bumper or winch. If you haul heavier loads or you
just want to replace the sagging OEM springs these suspension components are for
you.
Suspension Kit
Part Number DTS4042LC-1
Front 1.50" of lift Light duty ride, Gas or Diesel
Engine - Stock/Light Load (0-110lbs). Rear Medium Load (0 lbs to GVM) with 2.25"
lift
|
| Kit Includes the following: |
|
|
Your Cost $973.95 |
| Front Leaf Spring DTSARBCS001F |
2 each
|
|
|
| Shock DTSOME like N81 |
2 each
|
|
|
| Rear Leaf Spring DTSSARBCS001R |
2 each
|
|
|
| Shock DTSOME like N89 |
2 each
|
|
|
| See list below for individual parts that you may want to add
to support your installation. |
|
|
Shipping weight 136 #'s |
| |
|
Part No. |
Price Each
|
Weight Each
|
| TO COMPLETE INSTALLATION |
|
|
|
|
| Spring Bushing Kit (Pre '80) 35mm spring eye, 15mm shackle pin |
See figure |
OME likeSB30 (1) |
$29.09 each
|
1
|
| Spring Bushing Kit (Post '80) 35mm spring eye, 18mm shackle pin |
See figure |
OME likeSB1 (1) |
$29.66 each
|
1
|
| U Bolts |
|
OME likeU59A |
$15.13 each
|
2
|
| U Bolt (Early) |
|
OME likeU59B |
$15.13 each
|
2
|
| U Bolt (Late) |
|
OME likeU55 |
$13.78 each
|
2
|
| Rear Anti Inversion Kit |
|
FK08 (2) |
$13.88 each
|
1
|
| Steering Damper |
|
OME likeSD23 |
$96.14 each
|
6
|
| |
|
|
|
|
| OPTIONAL ACCESSORIES |
|
|
|
|
| Front Greasable Shackle Kit (Pre '80) |
|
OME likeGS8 |
$143.77 each
|
6
|
| Front Greasable Shackle Kit (Post '80) |
|
OME likeGS1 |
$140.28 each
|
6
|
| Rear Greasable Shackle Kit (Pre '80) |
|
OME likeGS9 |
$148.39 each
|
6
|
| Rear Greasable Shackle Kit (Post '80) |
|
OME likeGS2 |
$123.62 each
|
6
|
| Greasable Pin Kit (Pre '80) |
|
OME likeGP8 |
$79.98 each
|
3
|
| Greasable Pin Kit (Post '80) |
|
OME likeGP1 |
$76.80 each
|
3
|
| Front Extra Leaf |
|
13XL (3) |
$33.50 each
|
7
|
| Rear Extra Leaf |
|
14XL (3) |
$48.45 each
|
7
|
| Rear Trim Spacer |
|
TP02 |
$11.53 each
|
1
|
| |
|
|
|
|
| Remarks: |
|
|
|
|
| (1) OME SB30 suits 35mm spring eye and hanger bracket with
15mm shackle pin hole. OMESB1 suits 35mm spring eye and hanger bracket with 18mm
shackle pin hole. |
| (2) FK08 Anti Inversion Kit is mandatory fitment front and
rear if greasable shackles are not fitted. |
(3) Extra Leaf can be fitted for heavier constant load carrying
ability. IMPORTANT: Install leaf springs with military wrap at the fixed end.
*Shock -- First part number gives firmer ride for: FRONT - Increased axle
weight eg: diesel, bullbar, winch, REAR - Regular load carriers and those
who prefer a positive feel.
|
Diagram 4
\
Other suspension systems:
We offer a complete line of steering and suspension products for your vehicle, check out other products we offer at the following links:
We offer a complete line of steering and suspension products for your vehicle, check out other products we offer at the following links:
|