4
Runner Toyota IFS Rear Coil & Leaf Spring Fully integrated 4x4  suspension systems
Having problems with your Toyota 4 Runner's suspension saging, does the 4 Runner
have handling problems and an uncomfortable ride these can be common concerns
for vehicle owners with standard suspension. Our OME & ARB products
address these problems our engineers have developed suspension systems that
cater to your specific vehicle characteristics. Our renowned team of engineers,
who design and test every element of the suspension system - a practice
unique to our products
By installing a fully integrated 4x4 suspension system, you can dramatically improve
the safety and handling of your vehicle. These suspension
parts are designed to replace the original factory springs, shocks, polyurethane
bushings, steering stabilizer for some application Ubolts and shackles, greasable
shackles & pins are available. Our suspension components are designed to use
your existing mounts. |
| You purchase our EMU Nitrocharge Shock Absorbers and you
get: |
| |
Giant 18mm Chromed Shaft ? Indestructible for rugged off roading.
Induction hardened then hard chromed to a superfine finish.
Nitrogen Gas ? The gas pressure keeps the oil cohesive under all conditions.
Twin Tube Design ? New 33% thicker outer tube insures that rocks do not damage internal
operating components. This design also allows for a greater volume of oil which keeps
the shock cooler.
35MM Seven Stage Compression Valve ? Delivers all the subtleties of compression rates
for the best ride and handling.
Check Valve Seal ? The latest in seal technology, this shaft seal significantly improves
gas retention while offering excellent longevity.
Glacier Bush ? A Teflon coated rod guide bushing significantly reduces heat build
up in the god guide area, developed for the Emu? off road racing program.
Giant 35mm Teflon Banded Piston ? A new four stage coil sprung rebound valve system
to control vehicle bounce.
Supplementary Welds ? On all mounting eves and pins for maximum shock absorber mount
strength.
Stoneguard ? Protects oil seal and piston rod against stone and dirt damage.
Warranty ? 2 year 25,000 mile warranty for material and workmanship. |
| You purchase our advance designed EMU Coil Springs and you
get: |
| |
Shot Peened Coils? To reduce stress, which greatly enhance
spring life.
Double Scragged ? To eliminate spring sag.
Variable and Constant rate - Designs used to obtain optimum ride comfort and load
carrying capabilities. |
| You purchase our ARB advance designed Leaf Springs and you
get: |
| |
Flat axle seat area ? Lowers spring stress while retaining
spring free camber height. Unique our springs.
Anti Friction Inter Leaf Liners ? Used where applicable to reduce friction between
spring leaves giving better ride comfort and increase spring life.
Shot Peened ? On the tension side of all leaves to double spring life.
Draw Tapered and Diamond Cut Leaves ? For reduced interleaf friction and improved
load distribution in the load bearing area.
Graphite Coated ? For further reduced friction.
Military Wrapped ? For extra safety (where installation permits).
Loose Clamped ? For smoother and quiet operation. |
| You purchase our advance designed Urethane Bushings and
you get: |
| |
Premium Grade ? Not all bushings are the same EMU bushings
are precision molded in captive molds to ensure exact tolerances for longer bushing
life.
Unique EMU Design ? Clever lip seal and shoulder design prevents dirt penetrating
between bushing shoulder and shackle face. |
| With EMU's Steering Dampers Feature the following advance
design you get: |
| |
Coil Sprung 9 Stage Valving ? For optimum performance
35mm Piston and Bore ? Grater oil volume giving better damper performance.
Twin Tube Design ? Protects the internal components against stone damage.
Steel Stoneguard ? Protects the piston rod against stone damage.
Foam Cell ? Keeps the oil at the valving to prevent fade.
Original Mounts ? All mounts are of similar design to original dampers for ease of
INSTALLATION. |
In addition to providing lifts these Suspension components enhances ride quality,
articulation and longevity. Package includes polyurethane bushings springs, greasable
shackles & pins, gas shocks and steering stabilizer (sway bar extenders when
applicable). Below you will find information and suspension products for Toyota
4 Runners with IFS Rear Coil Springs .
Lift is provided to 1.5 inches applications for both medium and heavy duty load
ratings plus shocks for both front and rear to complete the integrated suspension
design. IFS Rear Leaf Springs are also available
in both medium duty, lift is provided to 2.0 inches and heavy duty load ratings
with lift of 2.25 inches for the Toyota 4 Runners.
Benefits of selecting our components
for your application are:
Consistency Leaf springs
are formed on precision tooling and manufactured to the highest standards. A scragging
process is performed before and after the leafs are shot peened to reduce stress
and prevent sagging.
Diversity Leafs are available
to suit a wide variety of applications, weight and lift ? even those you thought
were impossible.
Quality Leaf spring end
configurations are designed to exact specifications guaranteeing perfect fitment
to your vehicle, while a durable powder coat finish provides a quality appearance
for years.
ARB advanced engineering and manufacturing
technology bring better suspension performance to your Toyota 4 Runner
Our suspension systems include carefully matched spring and shock combinations
engineered to improve vehicle ride quality, handling and control under various
loads. We recommend you change both shock and springs at the same time. Special
attention is given to improving suspension travel without adversely affecting
driveline and steering geometry. In most cases, multiple spring rates and shock
valving characteristics are available for each application to accommodate vehicle
variations and driving preferences. Although ride height and tire size are taken
into consideration with each system, the emphasis is placed on vehicle performance
and versatility.
Below you will find detailed application information on both the front and rear
suspension parts, springs, shocks and accessories components for your Toyota 4
Runner vehicle. You will note that springs and shocks are provided for different
load rating, to support your specific application, allowing you the additional
capability if you have changed the engine, installed a larger bumper or winch.
If you haul heavier loads or you just want to replace the sagging OEM springs
the drivetrain.com suspension components are for you.
| |
Approximate Lift
|
Part No.
|
Price Each
|
Weight Each
|
| 4 RUNNER IFS
REAR COIL SPRING MODELS |
|
|
|
|
| FRONT |
|
|
|
|
| Stock/Light Load |
|
|
|
|
| Coil Spring |
|
N/A (1) |
|
|
| Shock |
|
N98 |
$107.92 each
|
8
|
| REAR |
|
|
|
|
| Medium Load (0lbs to GVM) |
|
|
|
|
| Coil Spring |
1.50"
|
OME900 |
$97.23 each
|
9
|
| Shock |
|
N72F |
$107.92 each
|
8
|
| Heavy Constant Load (330lbs to GVM) |
|
|
|
|
| Spring |
1.50"
|
OME901 |
$97.23 each
|
14
|
| Shock |
|
N72F |
$107.92 each
|
8
|
| TO COMPLETE INSTALLATION |
|
|
|
|
| Steering Damper |
|
OMESD33 |
$97.14 each
|
6
|
| Remarks: |
|
|
|
|
| (1) Adjust front torsion bar for additional height after installing
rear springs. Set ride height to 1/3 upper bump stop clearance and 2/3 lower
bump stop clearance. |
| |
Approximate Lift
|
Part No. |
Price
|
Weight
|
| 4 RUNNER IFS REAR LEAF
SPRING MODELS |
|
|
|
|
| FRONT |
|
|
|
|
| Stock to Light Load |
|
|
|
|
| Spring |
|
N/A |
|
|
| Shock |
|
N98 |
$107.92 each
|
8
|
| REAR |
|
|
|
|
| Medium Load (0lbs to GVM) |
|
|
|
|
| Leaf Spring |
2.0"
|
CS009R-OME17 (2) |
$129.14 each
|
41
|
| Shock |
|
*N85/N94 |
$107.92 each
|
8
|
| Leaf Heavy Constant Load (440lbs to GVM) |
|
|
|
|
| Spring |
2.25"
|
CS010R-OME171 (2) |
(Call For Pricing)
|
|
| Shock |
|
N85 |
$107.92 each
|
8
|
| TO COMPLETE INSTALLATION |
|
|
|
|
| Rear Leaf Spring Bushing Kit |
|
OMESB6 |
$24.43 each
|
1
|
| U Bolts |
|
OMEU53 (3) |
$13.78 each
|
2
|
| Steering Damper |
|
OMESD33 |
$97.14 each
|
6
|
| OPTIONAL ACCESSORIES |
|
|
|
|
| Greasable Shackle Kit |
|
OMEGS3 |
$121.10 each
|
6
|
| Greasable Pin Kit |
|
OMEGP3 |
$77.71 each
|
3
|
| Rear Extra Leaf |
|
17XL(4) |
$27.23 each
|
7
|
| Remarks: |
|
|
|
|
| (1) Adjust front torsion bar for additional height after installing
rear springs. Set ride height to 1/3 upper bump stop clearance and 2/3 lower bump
stop clearance. |
| (2) Install OE caster wedges from OE spring pack onto OME
springs. Ensure wedges are fitted as per original position. |
| (3) Compare original spring pack height to OME spring pack
to determine whether OMEU53 or OMEU53B U bolts are required. |
(4) Extra leaf can be fitted for heavier constant load carrying
ability.
*Shock -- First part number gives firmer ride for: FRONT - Increased axle
weight eg: diesel, bullbar, winch, REAR - Regular load carriers and those
who prefer a positive feel.
Installation Instructions |
* Ground Freight charges will be added.
$25.00 minimum order.
|
Suspension and Steering 
