Toyota Pickup Extra / Dual Cab SR5 1986 to 1994
Fully integrated Leaf Spring 4x4
suspension systems improve your suspension!
Having problems with your Toyota Pickup's suspension saging, does the SR5 Pickup have handling
problems and an uncomfortable ride these can be common concerns for vehicle
owners with standard suspension. Our ARB/OME products address these problems
our engineers have developed suspension systems that cater to your specific
vehicle characteristics. ARB/OME does this via their renowned team of engineers,
who design and test every element of the suspension system - a practice unique
to OME. Our kits include carefully matched spring and shock combinations engineered
to improve vehicle ride quality, handling and control under various loads. We
recommend you change both shock and springs at the same time. Special attention
is given to improving suspension travel without adversely affecting driveline
and steering geometry. In most cases, multiple spring rates and shock valving
characteristics are available for each application to accommodate vehicle variations
and driving preferences. Although ride height and tire size are taken into consideration
with each system, the emphasis is placed on vehicle performance and versatility.
By installing a fully integrated 4x4 suspension system, you can dramatically improve
the safety and handling of your vehicle. Old Man Emu
manufactures these suspension replacement parts in Australia. These suspension parts
are designed to replace the original factory springs, shocks, polyurethane bushings, steering
stabilizer for some application Ubolts and shackles, greasable shackles & pins
are available. Old Man Emu components are designed to use your existing mounts.
You purchase our advance designed ARB Leaf Springs and
you get:
Flat axle seat area – Lowers spring stress while retaining
spring free camber height. Unique to most OME springs.
Anti Friction Inter Leaf Liners – Used where applicable to reduce friction between
spring leaves giving better ride comfort and increase spring life.
Shot Peened – On the tension side of all leaves to double spring life.
Draw Tapered and Diamond Cut Leaves – For reduced interleaf friction and improved
load distribution in the load bearing area.
Graphite Coated – For further reduced friction.
Military Wrapped – For extra safety (where installation permits).
Loose Clamped – For smoother and quiet operation.
You purchase our EMU Nitrocharge Shock Absorbers and
you get:
Giant 18mm Chromed Shaft – Indestructible for rugged off
roading. Induction hardened then hard chromed to a superfine finish.
Nitrogen Gas – The gas pressure keeps the oil cohesive under all conditions.
Twin Tube Design – New 33% thicker outer tube insures that rocks do not damage internal
operating components. This design also allows for a greater volume of oil which keeps
the shock cooler.
35MM Seven Stage Compression Valve – Delivers all the subtleties of compression rates
for the best ride and handling.
Check Valve Seal – The latest in seal technology, this shaft seal significantly improves
gas retention while offering excellent longevity.
Glacier Bush – A Teflon coated rod guide bushing significantly reduces heat build
up in the god guide area, developed for the Emu” off road racing program.
Giant 35mm Teflon Banded Piston – A new four stage coil sprung rebound valve system
to control vehicle bounce.
Supplementary Welds – On all mounting eves and pins for maximum shock absorber mount
strength.
Stoneguard – Protects oil seal and piston rod against stone and dirt damage.
Warranty – 2 year 25,000 mile warranty for material and workmanship.
You purchase our advance designed Urethane Bushings and
you get:
Premium Grade – Not all bushings are the same EMU bushings
are precision molded in captive molds to ensure exact tolerances for longer bushing
life.
Unique EMU Design – Clever lip seal and shoulder design prevents dirt penetrating
between bushing shoulder and shackle face.
With EMU's Steering Dampers Feature the following advance
design you get:
Coil Sprung 9 Stage Valving – For optimum performance
35mm Piston and Bore – Grater oil volume giving better damper performance.
Twin Tube Design – Protects the internal components against stone damage.
Steel Stoneguard – Protects the piston rod against stone damage.
Foam Cell – Keeps the oil at the valving to prevent fade.
Original Mounts – All mounts are of similar design to original dampers for ease of
INSTALLATION.
In addition to providing lifts our suspension enhances ride quality, articulation
and longevity. Package includes polyurethane bushings springs, greasable shackles
& pins, gas shocks and steering stabilizer (sway bar extenders when applicable).
Below you will find information and suspension products for Toyota Pickup with Rear
Leaf Springs. Two different load ratings are available medium duty with 1.75"
of lift and heavy constant load with 2.25" of lift.
Is your Toyota 4 Runner's suspension saging, does the 4 Runner have handling
problems and an uncomfortable ride these can be common concerns for vehicle
owners with standard suspension. Our OME products address these problems OME
engineers have developed suspension systems that cater to your specific vehicle
characteristics.
By installing a fully integrated 4x4 suspension system, you can dramatically improve
the safety and handling of your vehicle. Old Man Emu
manufactures these suspension replacement parts in Australia. These suspension parts
are designed to replace the original factory springs, shocks, polyurethane bushings,
steering stabilizer for some application Ubolts and shackles, greasable shackles
& pins are available. ARB/Old Man Emu components are designed to use your existing
mounts.
In addition to providing lifts drivetrain.com suspension enhances ride quality, articulation
and longevity. Package includes polyurethane bushings springs, greasable shackles
& pins, gas shocks and steering stabilizer (sway bar extenders when applicable).
Below you will find information and suspension products for Toyota pickup's with
Rear Leaf Springs.
| |
Approx. Lift |
Part No. |
Price Each
|
Weight Each
|
| FRONT |
|
|
|
|
| Stock Light Load |
|
|
|
|
| Spring |
|
N/A (1) |
|
|
| Shock |
|
N98 |
$107.92 each
|
8
|
| |
|
|
|
|
| REAR |
|
|
|
|
| Medium Load (0lbs to GVM) |
|
|
|
|
| Spring |
1.75" |
DTSCS019R (2) |
$181.74 each
|
27
|
| Shock |
|
*N85/N94 |
$107.92 each
|
8
|
| |
|
|
|
|
| Heavy Constant Load (440lbs to GVM) |
|
|
|
|
| Spring |
2.25" |
DTSCS020R (2) |
$239.44 each
|
|
| Shock |
|
*N85/N94 |
$107.92 each
|
8
|
| |
|
|
|
|
| TO COMPLETE INSTALLATION |
|
|
|
|
| Rear Leaf Spring Bushing Kit |
|
OMESB43 |
$30.99 each
|
1
|
| U Bolts |
|
OMEU53B (3) |
$13.78 each
|
2
|
| Steering Damper |
|
OMESD33 |
$97.14 each
|
6
|
| |
|
|
|
|
| OPTIONAL ACCESSORIES |
|
|
|
|
| Rear Extra Leaf |
|
18XL (4) |
$29.57 each
|
7
|
| *Shock -- First part number gives firmer ride for: FRONT
- Increased axle weight eg: diesel, bullbar, winch, REAR - Regular load
carriers and those who prefer a positive feel. |
Suspension Kits and Components
for individual applications:
|