|
Fully integrated 4x4 suspension
systems for Cherokee XJ all models 1984-2001 improved suspension!
Problems with your Cherokee XJ's suspension saging, does the Cherokee have handling problems
and an uncomfortable ride these can be common concerns for vehicle owners with
standard suspension Our OME products address these problems OME engineers have
developed suspension systems that cater to your specific vehicle characteristics.
OME does this via their renowned team of engineers, who design and test every
element of the suspension system - a practice unique to OME. Our kits include
carefully matched spring and shock combinations engineered to improve vehicle
ride quality, handling and control under various loads. We recommend you change
both shock and springs at the same time. Special attention is given to improving
suspension travel without adversely affecting driveline and steering geometry.
In most cases, multiple spring rates and shock valving characteristics are available
for each application to accommodate vehicle variations and driving preferences.
Although ride height and tire size are taken into consideration with each system,
the emphasis is placed on vehicle performance and versatility.
By installing a fully integrated 4x4 suspension system, you can dramatically
improve the safety and handling of your vehicle. Old Man Emu and ARB manufactures
these suspension replacement parts. These suspension parts are designed to replace
the original factory springs, shocks, polyurethane bushings, steering stabilizer
for some application Ubolts and shackles, greasable shackles & pins are
available. These suspension components are designed to use your existing mounts.
| You purchase our EMU Nitrocharge Shock Absorbers and you
get: |
| |
- Giant 18mm Chromed Shaft ... Indestructible for rugged off roading.
Induction hardened then hard chromed to a superfine finish.
-
Nitrogen Gas ... The gas pressure keeps the oil cohesive under all conditions.
-
Twin Tube Design ... New 33% thicker outer tube insures that rocks do not damage internal
operating components. This design also allows for a greater volume of oil which keeps
the shock cooler.
-
35MM Seven Stage Compression Valve ... Delivers all the subtleties of compression rates
for the best ride and handling.
-
Check Valve Seal ... The latest in seal technology, this shaft seal significantly improves
gas retention while offering excellent longevity.
-
Glacier Bush ... A Teflon coated rod guide bushing significantly reduces heat build
up in the god guide area, developed for the Emu? off road racing program.
-
Giant 35mm Teflon Banded Piston ... A new four stage coil sprung rebound valve system
to control vehicle bounce.
-
Supplementary Welds ... On all mounting eves and pins for maximum shock absorber mount
strength.
-
Stoneguard ... Protects oil seal and piston rod against stone and dirt damage.
-
Warranty ... 2 year 25,000 mile warranty for material and workmanship.
|
| You purchase our advance designed EMU Coil Springs and you
get: |
| |
Shot Peened Coils? To reduce stress, which greatly enhance
spring life.
Double Scragged ? To eliminate spring sag.
Variable and Constant rate - Designs used to obtain optimum ride comfort and load
carrying capabilities. |
| You purchase our advance designed Leaf Springs and you get: |
| |
Flat axle seat area ? Lowers spring stress while retaining
spring free camber height. Unique to most OME springs.
Anti Friction Inter Leaf Liners ? Used where applicable to reduce friction between
spring leaves giving better ride comfort and increase spring life.
Shot Peened ? On the tension side of all leaves to double spring life.
Draw Tapered and Diamond Cut Leaves ? For reduced interleaf friction and improved
load distribution in the load bearing area.
Graphite Coated ? For further reduced friction.
Military Wrapped ? For extra safety (where installation permits).
Loose Clamped ? For smoother and quiet operation. |
| You purchase our advance designed Urethane Bushings and
you get: |
| |
Premium Grade ? Not all bushings are the same EMU bushings
are precision molded in captive molds to ensure exact tolerances for longer bushing
life.
Unique EMU Design ? Clever lip seal and shoulder design prevents dirt penetrating
between bushing shoulder and shackle face. |
| With EMU's Steering Dampers Feature the following advance
design you get: |
| |
Coil Sprung 9 Stage Valving ? For optimum performance
35mm Piston and Bore ? Grater oil volume giving better damper performance.
Twin Tube Design ? Protects the internal components against stone damage.
Steel Stoneguard ? Protects the piston rod against stone damage.
Foam Cell ? Keeps the oil at the valving to prevent fade.
Original Mounts ? All mounts are of similar design to original dampers for ease of
INSTALLATION. |
In addition to providing lifts Old Man Emu Suspension enhances ride quality, articulation
and longevity. Package includes polyurethane bushings springs, greasable shackles
& pins, gas shocks and steering  stabilizer (sway bar extenders when applicable). For
the front of your Cherokee XJ we offer two different rated coil springs, stock/light
load with 1.75 inches of lift and heavy load rated coil springs that provide 1.5
inches of lift. Three different load ratings are provide by rear leaf springs,
light load with 2 inches of lift, medium Load with 3 inches of lift and heavy
constant load rated with 2 inches of lift.
Drivetrain.com suspension systems include carefully matched spring and shock
combinations engineered to improve vehicle ride quality, handling and control
under various loads. We recommend you change both shock and springs at the same
time. Special attention is given to improving suspension travel without adversely
affecting driveline and steering geometry. In most cases, multiple spring rates
and shock valving characteristics are available for each application to accommodate
vehicle variations and driving preferences. Although ride height and tire size
are taken into consideration with each system, the emphasis is placed on vehicle
performance and versatility.
Below you will find detailed application information on both the front and rear suspension
parts, springs, shocks and accessories components for your specific vehicle. You
will note that springs and shocks are provided for different load rating, to support
your specific application, allowing you the additional capability if you have changed
the engine, installed a larger bumper or winch. If you haul heavier loads or you
just want to replace the sagging OEM springs the drivetrain.com suspension components
are for you.
| |
Approx. Lift |
Part No. |
Price Each
|
Weight
|
| FRONT |
|
|
|
|
| Stock/Light Load (0-110lbs) |
|
|
|
|
| Coil Spring |
1.75" |
OME930 |
$102.23 each
|
10
|
| Shock |
|
*N35/N35C |
$113.92 each
|
8
|
| Heavy Load (110-200lbs) |
|
|
|
|
| Coil Spring |
1.50" |
OME930 |
$102.23 each
|
10
|
| Shock |
|
N35 |
$113.93 each
|
8
|
| REAR |
|
|
|
|
| Light Load |
|
|
|
|
| Leaf Spring |
2.0" |
DEKARCS034RB-OMEJC1B |
$165.19 each
|
18
|
| Shock |
|
*N36/N36C |
$113.92 each
|
8
|
| Medium Load |
|
|
|
|
| Leaf Spring |
3.0" |
DEKARCS034RA-OMEJC1A |
$165.19 each
|
18
|
| Shock |
|
*N36/N36C |
$113.92 each
|
8
|
| Heavy Constant Load |
|
|
|
|
| Leaf Spring |
2" |
DEKARCS035RA-OMEJC2A |
$165.19 each
|
19
|
| Shock |
|
N36 |
$113.92 each
|
8
|
| TO COMPLETE INSTALLATION |
|
|
|
|
| U Bolts |
|
OMEU60 or OMEU57 (2) |
$15.80 each
|
2
|
| T-Case Spacer Kit |
|
XJGK01 (3) |
$61.51 each
|
1
|
| Steering Damper |
|
OMESD40 |
$99.14 each
|
6
|
| OPTIONAL ACCESSORIES |
|
|
|
|
| Front 10mm Trim Spacer |
|
OMEJGF10 |
$14.68 each
|
1
|
| Rear Extra Leaf |
|
JCXL (4) |
$33.57 each
|
7
|
| ALSO AVAILABLE |
|
|
|
|
| Front Extended Length Shocks |
|
N35L (5) |
$113.92 each
|
8
|
| Rear Extended Length Shocks |
|
N36L (5) |
$113.92 each
|
8
|
| Remarks: |
|
|
|
|
| (1) Factory rubber leaf spring bushings are used to isolate
road noise. Install original bushings from OE springs if they are in good
condition, or source new OE bushings from dealership |
| (2) OMEU60 suits Dana35 type axle. OMEU57 suits Chrysler 8.25"
type axle. |
| (3) XJGK01 Should be installed if driveline vibration occurs.
OMECW2 Caster Wedge may be used to reduce tail shaft angle as an alternative. |
| (4) Extra Leaf can be fitted for heavier constant load carrying
ability- see page |
(5) N35L/N36L Extended LengthShocks are for 3-5" suspension
lifts only and are not intended for use with any Old EMU Systems. Modified
bump stops are required.
* First part number gives firmer ride for: FRONT- Increased axle weight
eg: diesel, bullbar, winch. REAR- regular load carriers and those who prefer
a positive feel.
|
We offer a complete line of steering and suspension products for your vehicle, check out other products we offer at the following links:
|
Suspension and Steering 
