Below we present a small sample of the Red Line products that
we use and recommend to our customers, including Oil, Gasoline and Diesel Fuel additives
and the cooling system additives.
Red Line Synthetic Engine Oils are derived from our Race
Oils and are used by many racers, they were formulated specifically for street use
in all kinds of passenger cars and light, medium and heavy trucks. Red Line Engine
Oils outperform all petroleum-based oils and all other synthetics on the market today.
Our Engine Oils are designed to provide highest performance, best durability, ultimate
protection and outstanding cleanliness along with lowest friction to your automotive,
motorcycle, marine or stationary engine running
on gasoline, diesel, alcohol or natural gas fuel.
At Red Line, we use the most stable synthetic lubricant
base stocks available and formulate our products for wear protection and friction
reduction across a wide range of engine operating conditions. Red Line lubricants
are unique because they contain polyester base stocks, the only lubricant base stock
type that withstands the incredible heat present in the hot sections of jet engines.
This high-temperature stability makes Red Line Engine Oils
a necessity for proper lubrication of high-performance engines, turbo-charged engines,
heavily loaded truck engines or any engine that runs high engine oil temperature.
Red Line is not just for high-performance and racing. Ordinary cars and trucks that
see "daily driver" duty benefit greatly when their engines are lubricated
with Red Line engine oils. More performance, better fuel economy and increased durability
come with use of our oils in daily drivers. Because of the robust polyester base
stock and high-performance anticorrosive additive package in Red Line oils, they
are ideal for use in street-driven vehicles at extended drain intervals. Red Line
recommends oil changes for engines that are in good condition and do not see frequent
starts without warm-ups or short-trips at between 10,000 and 18,000 miles for gasoline
engines, 10,000 and 12,000 miles for diesel engines.
Synthetic Oil's
 |
|
Red Line 5W30 - Provides the quickest
starts and fastest oil pressure rise. Will reduce turbo lag and provides more power
and best economy in an engine in good condition. Replacement for OE factory-fill
oils in passenger cars and most light trucks. Thicker oil film at operating temperature
than a petroleum 10W-40. Best choice for engines operated in extreme cold weather.
Red Line 10W30 - Best all-weather
viscosity grade for gasoline engines in cars and light trucks that are driven on
the street on a daily basis. Reduces turbo lag and provides more power and economy
while providing thicker bearing oil films at operating temperature than a petroleum
10W-40. Best all-round, synthetic oil for stock or slightly modified engines in high-
performance cars that are street-driven. Best choice to replace a 5W-30 or 10W-30,
petroleum-based or other-brand synthetic oil if maximum durability is preferred.
Acceptable for engines that are occasionally operated in extreme cold weather.
Red Line 10W40 - Best choice for
engines that typically run high oil temperature. Best choice for engines in daily
drivers operated in very hot weather on a regular basis. Best choice for medium and
heavy duty gasoline engines in trucks. Best choice for high-performance engines that
see street as well as frequent racetrack duty. Thicker oil film at operating temperature
than a petro-based 20W-50.
Red Line 15W50 & 20W50 - The
ultimate high-temperature protection in Red Line engine oils recommended for street
use. Good for engines that regularly run very high oil temperatures. Best for engines
that run large clearances such as air-cooled engines or large-displacement, all-out
racing engines that see occasional street use. Provides 25% more viscosity in bearings
than petroleum 20W-50s. Not recommended for use in cold climates where temperatures
are at or below 10 degfrees F or -12 degfrees C. Not recommended for street use in
production engines that see sustained oil temperatures below 225 degfrees F. Those
engines should use Red Line 10W-30 or 10W-40.
Red Line 15W40 DIESEL ENGINE OIL - Highly
resistant to thermal breakdown. Provides double the detergent and acid-neutralizing
ability of conventional petroleum diesel engine oils for maximum engine cleanliness.
Ideal for diesels that run high oil temperature, such as those operated in hot weather
or those in light truck applications where heavy loads are carried or towed. Best
choice in medium and heavy-duty diesel truck engines when maximum durability is required.
When used at extended drain intervals, it is an excellent value for long-haul, fleet
use. |
Your Cost
$10.95 qt.
|
Gasoline Additive
 |
|
Fuel System Cleaner - is a concentrated
package of the most powerful high-temperature detergents available to clean gasoline
fuel injectors and intake valves.
Complete Fuel System Cleaner can clean injectors to nearly 100% efficiency in one
treatment. The cleansing effect on injector deposits can raise fuel economy approximately
12% or even greater, depending on the condition of the injectors. Although many gasolines
advertise injector cleanliness, GM presented a paper to the SAE which indicates that
their customers encountered injector plugging with all major brands of gasoline (SAE
861533). Complete Fuel System Cleaner contains detergents and a synthetic upper cylinder
lubricant which will help clean the intake valves, pollution control valves, combustion
chamber deposits and carburetors. Complete Fuel System Cleaner also protects the
fuel system from rust. One bottle treats up to 100 gallons.
Safe for continual use. |
Your Cost
$9.69 15 oz.
|
Diesel Fuel
Additive |
|
Diesel Fuel Additives - promote
better fuel combustion and fuel system lubrication. They provide faster ignition
, reduce detonation, reduce smoke, and improve engine efficiency. Extremely powerful
high-temperature detergents clean fuel injectors. Lubricants significantly lengthen
injector and pump life and reduce ring friction which is very important for today's
low-sulfur fuel. Both Red Line Diesel Fuel Catalyst and 85 Plus are available as
a winterized version which will reduce the pour point of a typical fuel by 25 degrees
F. Diesel Ignition Improvers - Additives designed for heavy-duty fleet use.
Improves Fuel Economy -Red Line additives are designed to provide measurable and
statistically significant fuel efficiency improvements. Red Line RL-2 and RL-3 (contains
cetane booster) both improve efficiency by 5.7% relative to untreated fuel. These
efficiency improvements are due to injector and ring belt cleanliness and the reduction
of friction in the injectors, injection pump, and piston ring reversal area. The
use of RL-2 and RL-3 also increases the power output of a diesel engine by approximately
5%. Fuel economy is also improved by similar percentages unless all of the additional
power is used to provide faster speeds and acceleration. Fleet tests have shown increases
in fuel economy of 3-4% after a few thousand miles of use with Red Line additives. |
Your Cost
$7.03 12 oz.
|
Cooling
System Additive
Gas & Diesel
  |
|
Red Line WaterWetter - is designed
to provide improved metal wetting and excellent corrosion inhibition when added to
plain water or a glycol coolant. The most poorly maintained system in an automobile
is usually the cooling system. Maintenance is quite simple and only required once
each year, but most vehicle owners never routinely change the coolant or replenish
the corrosion inhibitors which are required for trouble-free operation. Proper cooling
system maintenance is very critical for most modern engines which utilize more aluminum.
Aluminum has a very high corrosion potential, even higher than zinc, which is very
widely used as a sacrificial anode. The only property which enables aluminum to be
used in a cooling system is that it will form protective films under the proper conditions
which will prevent the uncontrolled corrosive attack of acids or bases. Poor aluminum
corrosion inhibition will cause the dissolution of aluminum at the heat rejection
surfaces, weakening the cooling system walls and water pump casing and weakening
the head gasket mating surfaces. These corrosion products will then form deposits
on the lower temperature surfaces such as in radiator tubes which have very poor
heat transfer properties, causing a significant reduction in the cooling ability
of the entire system. Red Line WaterWetter will provide the proper corrosion inhibition
for all cooling system metals, including aluminum, cast
iron, steel, copper, brass, and lead. |
Your Cost
$9.95 12oz. Gas
Your Cost
$13.95 15oz. Diesel
|
Product information and individual product data sheets are
available, just send us an email requesting desired data.
Most Orders Shipped the same day!!
Most credit cards accepted.
If it's a part and or a components
under your vehicle we can supply it!
Or you can call the order desk at 1-800-216-1632,
talk to a knowledgeable technician.
Considering purchasing manual transmission
or parts from drivetrain.com and have questions contact Tech line at 1-702-876-3100
or send e-mail to ujoints@drivetrain.com
Drivetrain Specialists of Las Vegas - Las Vegas
NV, 89102
