Ring and Pinion GM 250 MM Camaro Rear Axle Differential Parts
Why buy the best rear End Parts manufactured by American Axle rear End Parts (OE)
OE parts are made by the vehicles manufacture. These match the parts that came with your vehicle when it rolled off the assembly line.
As a stocking distributor for American Axle Manufacture we offer a full line of Original Equipment (OE) parts. Demand original OE parts the same parts the your vehicle left the factory with including, the 7.25 inch to 11.5 inch Ring and Pinions plus other differential components.
The complete line of American Axle rear end and differential parts for the Camaro 250mm is provided. These parts include: Ring and Pinion, Crush Sleeve and miscellaneous parts are available and should be changed at the same time as installation of new Ring & Pinion Gear. Simple troubleshooting information is provided. A detailed Parts Illustration is found at bottom of page.
You can identify problems with your rear differential there are four typical problems associated with General Motor vehicles.GM 250 mm Rear Ends they are Ring gear and pinion failure:
Problem #1 Regular “clunking” or loud “clicking” every few feet may indicate a broken ring or pinion gear tooth. “Banging, clicking or clunking” while cornering can be caused by broken carrier bearings or side gears commonly called “spider gears”, lack of sufficient positraction lubrication, or worn positraction clutches.
We can provide the following GM Axle Components including Repair Kits that include Ring and Pinion Sets, Bearing Kit Master and Pinion Kit, Internal Kit, Gaskets and seals.
Guaranteed Only our original equipment (OE) quality differential components are guaranteed to meet the same specifications as the factory parts they replace. More lapping cycles and tighter tolerance in the manufacturing process, reduce noise, improve performance, It's important.
Performance GM 250 mm inch AAM components means performance to the vehicle manufacturer’s standards.Why change gear ratio? Lower ratio provides more power (off the line), higher ratio for concrete cursing an getting Groceries, provides more miles per gallon
AAM Reliable AAM products are designed for long-term reliability.
AAM Durable Advanced processes ensure AAM products withstand the high usage demand for all GM applications
Quality AAM products are manufactured to the highest-quality standards that customers demand
Performance AAM products are engineered, manufactured and validated to meet OEM specifications and ensure ultimate performance.
A detailed parts illustration is provide to assist you in identifying the correct parts, the first time. Supply the correct parts to you mechanic will save you money. Click part number to see more information including your cost.
American Axle Chevrolet GM rear End Differential OE Parts
Rear End AMM GM 250mm Products
|PART NUMBER||Description||Model||Year||Axle Type||Axle Ratio||Teeth||Your Cost|
|40104505||TracRite PC - Plate clutch limited slip differential - Used with ZL1 Camaro only||2012 - 2015||250 MM Rear Axle||3.23+||32 / 1.37"||$695.95|
|40088189||Flange||Camaro||250 MM Rear Axle||30 / 39.50||$49.03|
|40090947||Ring & Pinion Kit ZL1 Option only||Camaro||2012 - 2015||250 MM Rear Axle||3.73 / 11x41||$326.86|
|40090948||Ring & Pinion Kit ZL1 Option only||Camaro||2012 - 2015||250 MM Rear Axle||3.23 / 13x42||$326.86|
|40090638||Crush Sleeve||Camaro||2013 - 2015||250 MM Rear Axle||$5.20|
|40003255||Pinion Washer 47mm OD X 31mm ID X 5mm WIDTH||Camaro||2012 - 2015||250 MM Rear Axle||$1.53|
|40033325||Cover Pan Bolt M10 x 1.5 x 45 - 6 PT FLANGE HEX||Camaro||2012 - 2015||250 MM Rear Axle||$0.72|
|40071720||Ring Gear Bolt M14 x 1.5 - 6 PT SERRATED HEX W/ ADHESIVE||Camaro||2013 - 2015||250 MM Rear Axle||$1.11|
|40085863||Pinion Nut||Camaro||2013 - 2015||250 MM Rear Axle||$5.50|
|40069319||Pinion Seal||Camaro||2012 - 2015||250 MM Rear Axle||$17.83|
|40088197||Output Seal||Camaro||2012 - 2015||250 MM Rear Axle||$22.90|
|40042937||Fill Plug M20x1.5x15 w/ Magnet||Camaro||2012 - 2015||250 MM Rear Axle||$2.59|
|40066428||Axle Vent M10x1.50 THREADED W/ SEALANT & 6MM STEPPED BARB||Camaro||2012 - 2015||250 MM Rear Axle||$1.87|
Didn't find what you need just give us a call 800-216-1632 & talk to our technical expert