Ring & Pinion Sets GM: 9.25" Clamshell - Front Axle

Ring & Pinion Front End Differential Parts 9.25 Front Inch American Axle GM Original  Equipment

Why buy only the best Front End Parts manufactured by American Axle Front End Parts  These are (OE)

OE parts are made by the vehicles manufacture.  These match the parts that came with your vehicle when it rolled off the assembly line at the factory.

As a stocking distributor for American Axle Manufacture we offer a full line of Original Equipment (OE) parts. Demand original OE parts the same parts the your vehicle left the factory with including, the 7.25 inch to 11.5 inch Ring and Pinion & other differential components.

Master Bearing Kit Pinion Bearing Kits are available and should be changed at the same time as installation of new Ring & Pinion Gear.  Simple troubleshooting information is provided.

We offer a complete line of American Axle Front end and differential parts for the 9.25 front clamshell.  You find the complete parts list and detailed parts illustration is located below:

Ring and Pinion Sets, Axles, Master bearing kits, Carrier/Cases and other miscellaneous parts. We have provided ring and pinion gear setup specifications.

American Axle Manufacturing's ultimate performance for your:  Sierra, Yukon, Silverado, Avalanche, Tahoe, Suburban, Escalade shown in table below are just some of the GM models we support.

We offer a complete line of American Axle Front end and differential parts for the 9.25 front clamshell.

You can identify problems with your Front differential there are. Four typical problems associated for General Motor vehicles.GM 9.25 front Front End are Ring Ring and pinion failure:

Trouble Shooting GM 9.25 front Front End Differential

Problem #1 Regular “clunking” or loud “clicking” every few feet may indicate a broken ring or pinion gear tooth. “Banging, clicking or clunking” while cornering can be caused by broken carrier bearings or side gears commonly called “spider gears”, lack of sufficient positraction lubrication, or worn positraction clutches.

Problem #2 with Dodge 10.5 inch AAM components
Worn carrier or pinion bearings can create excessive play between the gears and produce an uneven wear pattern or chipping teeth
Problem #3 with GM 10.5 inch AAM Components
Check for worn bearings and replace as necessary.
Problem
Problem #4: Improper break-in mileage
Can and will lead to premature wear and damage.

See Typical gear patterns below:

We can provide the following GM Axle Components including Repair Kits that include Ring and Pinion Sets, Bearing Kit Master and Pinion Kit, Internal Kit, Gaskets and seals.

Guaranteed Only our original equipment (OE) quality differential components are guaranteed to meet the same specifications as the factory parts they replace.  More lapping cycles and tighter tolerance in the manufacturing process, reduce noise, improve performance, It's important.

Performance GM 9.25 inch front  AAM components means performance to the vehicle manufacturer’s standards.Why change gear ratio?  Lower ratio provides more power (off the line) towing, higher ratio for concrete cursing an getting groceries, provides more miles per gallon

 AAM Reliable  AAM products are designed for long-term reliability.

AAM Durable Advanced processes ensure AAM products withstand the high usage demand for all GM applications

Quality AAM products are manufactured to the highest-quality standards that customers demand

Performance AAM products are engineered, manufactured and validated to meet OEM specifications and ensure ultimate performance.

AAM  Front End Differential 9.25 front OE Parts Reliable  AAM products are designed for long-term reliability.

AAM Durable Advanced processes ensure AAM products withstand the high usage demand for all GM applications

Quality AAM products are manufactured to the highest-quality standards that customers demand

Performance AAM products are engineered, manufactured and validated to meet OEM specifications

Didn't find what you need just give us a call 800-216-1632 & talk to our technical expert.

SPECIFICATIONS

A detailed parts illustration is provide to assist you in identifying the correct parts, the first time.  Supply the correct parts to you mechanic will save you money.  Click part number to see more information including your cost. Didn't find what you need just give us a call 800-216-1632 & talk to our technical expert

A detailed parts illustration is provide to assist you in identifying the correct parts, the first time.  Supply the correct parts to you mechanic will save you money. 

Click part number to see more information including your cost.

American Axle Chevrolet GM 9.25" Front End Differential OE Parts

Part Number Description Application Min year Max year Make Axle Type Ratio
40035046 Case/Carrier Loaded   2007 2014 GM 9.25" Clamshell - Front Axle 3.42+
14012695 Case/Carrier Empty   1986 2013 GM 9.25" Clamshell - Front Axle 3.42+
40029252 Inner Output Axle Shaft 4WD Sierra, Yukon, Silverado, Avalanche, Tahoe, Suburban, Escalade 1988 2013 GM 9.25" Clamshell - Front Axle  
40039201 Axle Shaft IFS  RH 4WD Sierra, Yukon, Silverado, Avalanche, Tahoe, Suburban, Escalade 1997 2013 GM 9.25" Clamshell - Front Axle  
40057071 Axle Shaft LH 4WD Silverado, Sierra, Hummer H2 2008 2013 GM 9.25" Clamshell - Front Axle  
40025925 Pinion Yoke GM 3R series        GM 9.25" Clamshell - Front Axle  
40058536 Ring & Pinion Set 2500, 3500, Silverado, Suburban, Sierra, Yukon 1988 2010 GM 9.25" Clamshell - Front Axle 3.73
40072307 Ring & Pinion Set 2500, 3500, Silverado, Suburban, Sierra, Yukon 1988 2010 GM 9.25" Clamshell - Front Axle 4.1
40136007 Ring & Pinion Set 2500, 3500, Silverado, Suburban, Sierra, Yukon 1988 2010 GM 9.25" Clamshell - Front Axle 5.13
40140594 Ring & Pinion Set 2500, 3500, Silverado, Suburban, Sierra, Yukon 1988 2010 GM 9.25" Clamshell - Front Axle 3.42
15521875 Diff Case Adjuster Retainer   1988 2010 GM 9.25" Clamshell - Front Axle  
26008812 Diff Case Adjuster Retainer   1988 2010 GM 9.25" Clamshell - Front Axle  
26031703 IFS Axle Output Shaft Snap Ring 1988 2010 GM 9.25" Clamshell - Front Axle  
26045211 Differential Case Adjuster   1988 2010 GM 9.25" Clamshell - Front Axle  
40040610 Snap Ring IFS Axle Output Shaft  1988 2010 GM 9.25" Clamshell - Front Axle  
14012691 Crush Sleeve All 1988 2010 GM 9.25" Clamshell - Front Axle  
74040363 Internal Kit Sierra, Silverado, Suburban, Yukon, Savana, Express, Avalanche, 2007 2010 GM 9.25" Clamshell - Front Axle  
74047037 Internal Kit Sierra, Silverado, Suburban, Yukon XL, Avalanche, H2 1981 2006 GM 9.25" Clamshell - Front Axle  
74080008 Shifter Disconnect Sierra, Yukon, Silverado, Avalanche, Tahoe, Suburban, Escalade 2001 2012 GM 9.25" Clamshell - Front Axle  
74067005 Master Bearing Kit Sierra, Silverado, Suburban, Yukon XL, Avalanche, 1988 2011 GM 9.25" Clamshell - Front Axle  
74010011 Pinion Install Kit Sierra, Silverado, Suburban, Yukon, Avalanche( H2 vent connector 1999 2016 GM 9.25" Clamshell - Front Axle  
15521873 IFS Output Needle Bearing   1988 2010   9.25" Clamshell - Front Axle  
15530296 IFS Output Needle Bearing   1988 2010   9.25" Clamshell - Front Axle  
26041516 IFS Output Needle Bearing   1988 2010   9.25" Clamshell - Front Axle  
11503877 IFS Tube & Carrier Bolt   1988 2010   9.25" Clamshell - Front Axle  
11503963 IFS Tube & Carrier Bolt   1988 2010   9.25" Clamshell - Front Axle  
74050005 Wheel Bearing Kit         9.25" Clamshell - Front Axle  
40007712 Pinion Seal   1988 2014   9.25" Clamshell - Front Axle  
40051283 Output Seal   1988 2010   9.25" Clamshell - Front Axle  
476753 Fill Plug   1988 2010   9.25" Clamshell - Front Axle  
14042602 Fill Plug Washer   1988 2010   9.25" Clamshell - Front Axle  
15588383 Drain Plug Washer   1988 2010   9.25" Clamshell - Front Axle  
26058815 Drain Plug   1988 2010   9.25" Clamshell - Front Axle  
40026655 Axle Vent   1988 2010   9.25" Clamshell - Front Axle