Chrysler 9.25 Inch Front End IFS

Ring & Pinion set Chrysler Dodge 9.25 Front End

Why buy only the best Front End Parts manufactured by American Axle, these are (OE)
 for your Chrysler Dodge Ram 2500 / 3500


OE parts are made by the vehicles manufacture.  These match the parts that came with your vehicle when it rolled off the assembly line.


As a stocking distributor for American Axle Manufacture we offer a full line of Original Equipment (OE) parts for the Dodge 9.25" Front Differential.

Demand original OE parts the same parts the your vehicle left the factory with including, the 7.25 inch to 11.5 inch Ring and Pinion & other differential components are available.

Master Bearing Kits are available and should be changed at the same time as installation of a new Ring & Pinion Gear. Axles, Carriers, Spyder Side Gears, Ring & Pinion Gear, Positraction, Cover and many more miscellaneous parts.

Simple troubleshooting Dodge 9.25" differential information is provided:

You can identify problems that might arise with your 9.25" Front Differential. Four typical problems associated for Dodge pickups.Chrysler 9.25 front End are Ring Ring and pinion failure:

Trouble Shooting Chrysler 9.25 Front End Differential.

Problem #1 Regular “clunking” or loud “clicking” every few feet may indicate a broken ring or pinion gear tooth. “Banging, clicking or clunking” while cornering can be caused by broken carrier bearings or side gears commonly called “spider gears”, lack of sufficient positraction lubrication, or worn positraction clutches. 


Problem #2 Worn carrier or pinion bearings can create excessive play between the gears and produce an uneven wear pattern or chipping teeth.
Problem

Problem #3 Check for worn bearings and replace as necessary.

Problem #4: Improper break-in mileage can and will lead to premature wear and damage.

Why change gear ratio?  Lower ratio provides more power (off the line), higher ratio for concrete cursing and getting Groceries, also provides more miles per gallon.

We supply a complete line of American Axle front end and differential parts for the Chrysler/Dodge 9.25" Front End see models below.

;

SPECIFICATIONS

  • RG DIAMETER 9.25"
  • M12 x 1.5RH Threaded Bolts
  • Pinion Diameter 1.875" 30 SPLINE
  • CASE: 4.10 & Numerically Lower

    No Case Break

  • 8620 Material Heat-Treated

    Assembly Specifications:

  • Cover Bolt Ft. Lbs. 15-25
  • Pinion Brg. Preload In. Lbs 6-7
  • Pinion Brg. Preload In. Lbs New 15-25
  • Ring Gear Backlash .005-.007"
  • Ring Gear Bolt to case Ft. Lbs. 103
  • Side Brg. Caps Ft. Lbs. 63

Didn't find what you need just give us a call 800-216-1632 & talk to our technical expert. 

These American Axle OE parts are:

Reliable  AAM products are designed for long-term reliability.
Advanced AAM processes ensure our products will withstand the high usage demand for all Dodge Pickups
Durable Quality AAM products are manufactured to the highest-quality standards that customers demand
Performance AAM products are engineered, manufactured and meet OEM specifications and ensure ultimate performance. 

Reliable AAM  Front End Differential 9.25 front OE Parts Reliable AAM products are designed for long-term reliability
Reliable AAM Durable Advanced processes ensure AAM products withstand the high usage demand for all Dodge applications
Quality AAM products are manufactured to the highest-quality standards that customers demand Guaranteed Only our original equipment (OE) quality differential components are Guaranteed to meet the same specifications as the factory parts they replace.  More lapping cycles and tighter tolerance in the manufacturing process, reduce noise, improve Performance Chrysler 9.25 inch front AAM components means performance to the vehicle manufacturer’s standards.



We offer a complete line of American Axle Front end and differential parts for the Dodge 9.25 inch front.

 
A detailed parts illustration is provide to assist you in identifying the correct parts, the first time.  Supply the correct parts to you mechanic will save you money.  Click part number to see more information including your cost. Didn't find what you need just give us a call 800-216-1632 & talk to our technical expert

A detailed parts illustration is provide to assist you in identifying the correct parts, the first time.  Supply the correct parts to you mechanic will save you money. 


Chrysler Dodge .

Part Number Application Model Min Year Max Year Description Axle Type Ratio Teeth Length
40036546 Ring & Pinion Ram 2500 / 3500 2007 2013 Ring & Pinion 9.25" Beam - Front Axle 3.73  11x41  
40036546 Ring & Pinion Ram 2500 / 3500 2003 2006 Ring & Pinion 9.25" Beam - Front Axle 3.73 11x41  
40041782 Ring & Pinion Ram 2500 / 3500 2007 2013 Ring & Pinion 9.25" Beam - Front Axle 4.1  10x41  
40041782 Ring & Pinion Ram 2500 / 3500 2003 2006 Ring & Pinion 9.25" Beam - Front Axle 4.1 10x41  
40045288 Ring & Pinion Ram 2500 / 3500 2007 2013 Ring & Pinion 9.25" Beam - Front Axle 3.42 12x41  
40045288 Ring & Pinion Ram 2500 / 3500 2003 2006 Ring & Pinion 9.25" Beam - Front Axle 3.42  12x41  
D925342GS-1 Ring & Pinion Ram 2500 / 3500 2014 2018 Ring & Pinion 9.25" Beam - Front Axle 3.42    
D925373GS-2 Ring & Pinion Ram 2500 / 3500 2014 2018 Ring & Pinion 9.25" Beam - Front Axle 3.73    
D925410GS-2 Ring & Pinion Ram 2500 / 3500 2014 2018 Ring & Pinion 9.25" Beam - Front Axle 4.1    
D925444GS Ring & Pinion Ram 2500 / 3500 2014 2018 Ring & Pinion 9.25" Beam - Front Axle 4.44    
40035046 Ring & Pinion   2003 2006 Ring & Pinion 9.25" Beam - Front Axle 3.42+   33 / 1.41"  
40052460 Ring & Pinion Ram 2003 2008 Ring & Pinion 9.25" Beam - Front Axle 3.73    
40112849 Ring & Pinion   2010 2013 Ring & Pinion 9.25" Beam - Front Axle 33 30  
74110002 Wheel Bearing Kit       Wheel Bearing Kit        
40020734 Axle Ram 2009   Axle Left 9.25" Beam - Front Axle     684.91 mmLong mm 
40020735 Axle Ram 2003 2008 Axle Right 9.25" Beam - Front Axle     1154.31mm Long mm 
40022771 Axle Ram 2003 2009 Axle Left Inner 9.25" Beam - Front Axle      
40022772 Axle Ram 2003 2009 Axle Right Inner 9.25" Beam - Front Axle      
40027243 Axle Ram 2003 2008 Axle Outer Axle Stub Shaft 9.25" Beam - Front Axle     187.5 Long mm 
40052461 Axle Ram 2009 2009 Axle Right 9.25" Beam - Front Axle      
40060431 Axle Ram 2010 2014 Axle Inner Left 9.25" Beam - Front Axle      
40060439 Axle Ram 2010 2013 Axle Inner Right 9.25" Beam - Front Axle      
40060443 Axle Ram 2010 2013 Axle Stub Outer 9.25" Beam - Front Axle     69.25 Long mm 
40072774 Axle Ram 2010 2013 Axle Short Left 9.25" Beam - Front Axle     684.91 Long mm 
40104193 Axle Ram 2014 2018 Axle Short Driver 9.25" Beam - Front Axle     684.97 Long mm 
40104194 Axle Ram 2014 2018 Axle Right 9.25" Beam - Front Axle     700.85 Long mm 
40031460 Case Loaded Open   2007 2013 Case Loaded Open 9.25" Beam - Front Axle 3.42+   33 / 1.41"
40089797 Case Open Loaded   2014 2016 Case Open Loaded 9.25" Beam - Front Axle     33
14012695 Case Empty   2003 2006 Case Empty 9.25" Beam - Front Axle 3.42+ 33 / 1.41"  
40028204 Case Empty   2007 2013 Case Empty 9.25" Beam - Front Axle 3.42+ 33 / 1.41"  
40047279 Positraction Trac Right   2003 2014 Positraction Trac Right 9.25" Beam - Front Axle 3.42+ 33 / 1.41"  
40015796 Cover   2003 2013 Cover 9.25" Beam - Front Axle.       
40087998 Cover   2014 2016 Cover 9.25" Beam - Front Axle.       
40114128 Axle inner Right   2014 2018 Axle inner Right 9.25" Beam - Front Axle     33
40047860 Pinion Yoke       Pinion Yoke 9.25" Beam - Front Axle   30 / 33.39  
14012707 Differential bearing adjusting nut       Lock Differential Bearing Lock 9.25" Beam - Front Axle      
74100001 Axle Ball Joint Kit Ram 2003 2013 Ball Joint 9.25" Beam - Front Axle      
74100007 Axle Ball Joint Kit Ram 2014 2018 Ball Joint 9.25" Beam - Front Axle      
74030009 Gasket, Cover Ram 2500/3500 2003 2012 Gasket, Cover 9.25" Beam - Front Axle      
74042462 Spyder/Side Gears Ram 2500/3500 2007 2012 Spyder/Side Gears 9.25" Beam - Front Axle      
74047037 Spyder/Side Gears Ram 2500/3500 2003 2006 Spyder/Side Gears 9.25" Beam - Front Axle      
40116533 Actuator Fork Disconnect Ram     Actuator Fork Assembly Disconnect 9.25" Beam - Front Axle      
74067005 Master Bearing Kit Ram 2003 2012 Master Bearing Kit 9.25" Beam - Front Axle      
74067022 Ring & Pinion Ram 2500/3500 2003 2016 Ring & Pinion 9.25" Beam - Front Axle  3.73    
517900 Washer Pinion Ram     Washer Pinion 9.25" Beam - Front Axle      
11516133 Nut Top Ram     Nut Top 9.25" Beam - Front Axle      
40010627 Nut Outer Axle Hub Ram     Nut Outer Axle Hub 9.25" Beam - Front Axle      
40010628 Axle Washer, Nut Ram     Axle Washer, Nut 9.25" Beam - Front Axle      
40011969 Nut Pinion Ram     Nut Pinion 9.25" Beam - Front Axle      
40011986 Bolt Front Hub Ram     Bolt Front Hub 9.25" Beam - Front Axle      
40012013 Nut Lower Ball Joint  Ram     Nut Lower Ball Joint  9.25" Beam - Front Axle      
40021280 Pin, Cotter  Retainer Nut Ram     Pin, Cotter  Retainer Nut 9.25" Beam - Front Axle      
40031306 Bolt Ring Gear Ram     Bolt Ring Gear 9.25" Beam - Front Axle      
9783762 Pinion Nut Ram     Pinion Nut 9.25" Beam - Front Axle      
74020009 Pinion Nut Ram 2500/3500 2003 2012 Seal Kit Pinion 9.25" Beam - Front Axle      
26060975 Seal Kit Pinion Ram     Axle Shaft Inner RH 9.25" Beam - Front Axle      
40011815 Gasket Rubber Over Metal Ram     Gasket Rubber Over Metal 9.25" Beam - Front Axle      
40011965 Seal Front Axle   2003 2013 Seal Front Axle 9.25" Beam - Front Axle      
40017140 Seal Front Axle   2003 2014 Seal Pinion 9.25" Beam - Front Axle      
40089793 Gasket Cover Ram     Gasket Cover 9.25" Beam - Front Axle      
26062696 Connector Axle Vent Hose Ram     Connector Axle Vent Hose 9.25" Beam - Front Axle      
74110001 U-Joint Kit1485 Series Ram 2003 2009 U-Joint Kit1485 Series 9.25" Beam - Front Axle