Toyota "G" Series Manual Transmission Rebuild Kits and Parts
We offer quality manual transmission rebuild kits and parts, our kits are designed to be top of the line overhaul kits. We have include information on how to identify individual transmissions, application information, model year, detailed kit and part availability by transmission type. Toyota transmission are covered in this section series "G", rear wheel drive (RWD). Typically used in Toyota Privia, Trucks and Vans including 4Runner. In addition to the parts listed here we can sometimes provide good used hard parts to save you money. We have provided an illistrated flow chart to help ensure that you have correctly identified your G52 Toyota manual transmission. Give us a call toll free 800-216-1632 and let us help you save some money!
Different overhaul kits are available depending on the extent of the overhaul that you plan, the contents of the kits are described as follows:
- DTS-BKXXX Kits (RWD): Main case bearings, gaskets, seals, kits may also include nuts, dogs & wires, thrust bearings, extension housing bushing, small parts kit, shifter bushings however miscellaneous parts will vary by transmission. Syncro rings are not in this kit.
- DTS-BKXXXWS Kits (RWD): Main case bearings, gaskets, seals and syncro rings, kits may also include nuts, dogs & wires, thrust bearings, extension housing bushing, small parts kit, shifter bushings however miscellaneous parts will vary by transmission.
Information and parts are provide for the following Transmission: Toyota "G" Series 4 & 5 Speed (RWD)
IDENTIFICATION - End loaded aluminum case removable bellhousing with four main bearings, an 8-bolt bearing retainer and a 4-bolt shifter. An illustrated parts drawingis provided for the G52.
Parts are available for the following Toyota transmission models: G40, G52, G53, G57/G59 and G58. In addition some syncor rings kit and individual hard parts are available, don't see what you need just give us a call.
|Model||Cyl.||Eng.||Year||Description||Overhaul Kit||Your Cost||Overhaul Kit w/Syncro Rings||Your Cost|
|G40 4spd, RWD|
|PICKUP||4cyl||2.4L||1983-90||Aluminum case, - 20mm wide input bearing (B32-14UR or 32BC08S1N) - 8 bolt front retainer||DTS-BK160||$158.98||DTS-BK160WS||$210.98|
|PICKUP||4cyl||2.4L||1983-90||Aluminum case, - 23mm wide input bearing (32TM03 or 32BCS4) - 8 bolt front retainer||DTS-BK161||$150.98||DTS-BK161WS||$199.98|
|G52 5spd, RWD|
|PICKUP||4cyl||2.4L||1983-88||Aluminum case, 8 bolt front retainer - 20mm wide input bearing (B32-14UR or 32BC08S1N) nut on back of countershaft||DTS-BK160||$158.98||DTS-BK160WS||$210.98|
|PICKUP||4cyl||2.4L||1983-88||Aluminum case, - 8 bolt front retainer - 23mm wide input bearing number 32TM03 or 32BCS4 nut on back of countershaft||DTS-BK161||$150.98||DTS-BK161WS||$199.98|
|G53 4spd, RWD|
|VAN||4 cyl||2.4L||1984-89||Aluminum case, - 20mm wide input bearing (B32-14UR or 32BC08S1 N) - nut on back of countershaft||DTS-BK160B||$189.98||DTS-BK160BWS||$301.98|
|G57/G59 4spd, RWD|
|PREVIA||4cyl||2.4L||1991-93||Aluminum case, - 8 bolt front retainer - 23mm wide input bearing (32TM03 or 32BCS4) - snap ring on back of countershaft||DTS-BK161L||$158.56||DTS-BK161LWS||$232.98|
|VAN||4 cyl||2.4L||1984-89||Aluminum case, - 23mm wide input bearing (32TM03 or 32BCS4) - snap ring on back of countershaft||DTS-BK161B||$168.28||DTS-BK161BWS||$224.54|
|G58 4spd, RWD|
|PICKUP||4cyl||2.4L||1989-95||Aluminum case, - 8 bolt front retainer - 23mm wide input bearing (32TM03 or 32BCS4) -snap ring on back of countershaft||DTS-BK161L||$158.56||DTS-BK161LWS||$232.98|
|Syncro Ring Kits|| |
|SK500A||Syncro Ring Kit||5 Speed|| |
|Miscellaneous Kits|| |
|K100502-8||Gasket and Seal Kit|| |
|DK500||Dog and Wire Kit||in MRK Kits|| |
|67008||Rear Bushing|| |
|ALT-G52||Input Shaft|| |
|301489||5th Gear set|| |