Different overhaul kits are available depending on the extent of the overhaul that you plan, the contents of the kits are described as follows:
- ALT Kit (FWD): Main case bearings, gaskets, seals,.
Information and parts are provide for the following Transmission: Muncie 282 5 Speed (FWD), an illustrated parts drawing is provided for Muncie model 282/5TM40.
IDENTIFICATION - Aluminum 2-piece case houses all the gears with a flat steel 9-bolt plate covering the rear bearings. The front input bearing and seal are serviced together as part of the front bearing retainer and can be pressed out of the front case. A round detent cover, approximately 3 1/2" in diameter, is located inside the bell housing. The syncro rings are steel with a brass lining. At the ends of the input and pinion shafts there are torx retainers (nuts) which are treaded opposite directions from each other.
|Chevrolet||Beretta 2.3 Liter 4 Cylinder & V6|| |
|Cavalier 6 Cylinder|| |
|Celebrity 2.8 Liter V6|| |
|Corsica 2.3 Liter 4 Cylinder & V6|| |
|Oldsmobile||Acheiva Quad 4|| |
|Calais Quad 4|| |
|Cutlass Supreme|| |
|Silhouette 2.3 Liter 4 Cylinder|| |
|Fiero 6 Cylinder|| |
|Grand AM Quad 4|| |
|Grand Prix|| |
|Sunbird Turbo & V6|| |
|Rebuild Kit|| |
|ALTBK234||Overhaul Kit|| |
|Rebuild Kit with Syncro rings|| |
|ALTBK234WS||Overhaul Kit plus Syncro Ring Kit|| |
|48432||Differential Carrier||Cone|| |
|48433||Differential Carrier||Cup|| |
|Metal Clad Seals|| |