NV5600 6 speed Manual Transmission Rebuild Kits & Parts
We offer top quality NV5600 manual 6 speed repair parts and overhaul kits including bearings, gasket and seal kits, we can also supply cases, tail housing sections, syncro assemblies, gears, input and output shafts for 6 Speed NV5600 manual Dodge transmissions. See parts illustration. Fluid you use in this transmission is critical see note. Call and ask about our good take out (used inspected) parts and let us help save you some money!
|Model Year|| |
|ALTBK492WS||2001-on||Bearing Overhaul Kit with Syncro Rings|| |
|22863||Front Bearing Retainer|| |
|SRK-5600||Syncro Ring Kit||$910.00|
|22748*||Input Shaft 26 teeth (5th)|| |
|CH22784||1st Gear Main shaft|| |
|CH22756||6th Gear MS 24 teeth|| |
|26222||Main shaft 2wd|| |
|26221||Main shaft 4wd|| |
|MWT26221-C||Main shaft 4wd Cyro Treated 30% stronger||$1099.00|
|CH22770*||2nd Gear 39 teeth|| |
|22784*||1st Gear 40 teeth|| |
|22884||Fork, Reverse|| |
|26704||Fork, 5th|| |
|26703||Fork, 1/2|| |
|26702||Fork, 3/4|| |
|44548||Syncro, 1-6, Reverse (Center) (Fiber|| |
|22880||Syncro Assembly Reverse|| |
|22886*||Reverse Gear 39T|| |
|22794*||3rd Gear 28 teeth|| |
|26166||Cluster Gear|| |
|22799||3/4 Syncro Assembly|| |
|CH22803||4th Gear 36T|| |
|26164*||5th Gear on Cluster 25 teeth|| |
|26165*||6th Gear on Cluster 57 teeth|| |
In the October 2003 Transmission Digest magazine, there is an article discussing the 2000 syncro rings for the Dodge NV5600 6 speed verses the 20001 on syncro rings. The early rings are no longer available and you need to replace the early gear and early syncro rings together as a set with the 2001-on parts. Parts identified above with (*) are the ones you will need for the upgrade. Purchase these parts (*) as a kit along with syncro rings and take a 10% discount.
Need parts not listed, send us a fax to 1-702-873-4534 and we will provide a quote. We also offer remanufactured NV5600 transmissions.
Special synthetic gear oil is required for proper operation and lifespan of the carbon composite synchronizers. The following lubricants are only the only ones to be used:
75W-90 Castrol Syntorque Synthetic (not the same as Castrol Syntech)
Mopar Manual Transmission Lubricants part number 4874459; material spec 9070GM Goodwrench Synthetic Manual Transmission Fluid part number 12346190, in Canada 10953477.