ACURA OEM MATCHED CLUTCH SETS, FLYWHEELS, MASTER and SLAVE CYLINDERS as well as CLUTCH CABLES

Clutch disc, pressure plate , bearing and tool for Acura models, CL Series, Integra, Legend NSX, RSX and Vigor models.

Highest Quality OEM Matched Sets 12 Month Warranty *

Acura Clutch & Flywheels Replacements

Acura  Master, Slave Cylinders and Clutch Cables Replacements

Need Help!   Free clutch troubleshooting information is provided to diagnosis problems, 14 different categories are available at:   Diagnosing Clutch Problems.

Having problems with the clutch assembly in your Acura? We provide a full range of better than OE clutch replacement clutch kits and parts for the following Acura models, CL Series, Integra, Legend, NSX, RSX and Vigor models.

Our clutch kits offer only the highest quality products available, each Clutch Kit contains everything needed to do the job right: Clutch Disc, Pressure Plate, Release Bearing, Pilot Bushing/Bearing, (where required), Alignment Tool, Spline Grease, and specific technical bulletins. To help ensure a trouble free job, torque specs for each application are conveniently printed on the bottom of the box.

Here we have provided a number of trouble shooting ideas that may help you diagnose your specific problem and assist with clutch repair. Acura Technical Notes.

Find listed below a detailed clutch application guide for the Acura we can provide matched kits for the Acura models, CL Series, Integra, Legend NSX, RSX and Vigor models.

Master, Slave Cylinders and Clutch Cables

* Our clutches are guaranteed for 12 month or 36,000 miles (manufactures material/workmanship), our warranty does not cover abuse. be sure to match up the new clutch with your old clutch to ensure that they match prior to installation. We are unable to accept returned clutches that have been installed in the vehicle.

Technical Note 1979-89:

These clutch assemblies re designed to be used with a Step Down Flywheel. The flywheel step should be maintained at .033" or 0.8mm. If the step is not maintained, incomplete release, slipping and chatter will result.

The front and rear transmission main shaft bearings must be checked for excessive movement and wear. Excessive main shaft or input shaft end play will increase clutch chatter.

Torque Specification

All models 1984 to 2002 19 foot lbs.

In addition to clutch kits for Acura CL Series, Integra, Legend, NSX, RSX and Vigor models, we also offer free technical support to assist you in solving your automotive problems as well as a large list of products to improve your vehicles performance, economy, safety and apperance: