Having vibration problems, this could be a failure of your driveline center support bearing? If you vehicle is equipped with a two-piece drive shaft this bearing support is located in the middle of the two shafts. Worn center bearings can case excessive vibration and can damage both transmission and differential seals, causing these units to loose fluid and fail, replacement is necessary before failure occurs.
The top quality driveline components we offer are designed to fit many vehicles applications, they offer the same quality as original equipment driveline components. Here we provide transmission center bearing supports to replace center bearings that are worn out, you may feel a vibration when the vehicle is in motion. Conditions of worn center bearings are: vehicle shake when taking off, vibrations in the seat between speeds of 20 to 30 miles per hour, and droning sound when cruising on the freeway between 60 and 70 miles per hour.
We can provide driveline and differential components you need. Call for free technical support; get the correct part the first time.
Find the part you need listed below we have provided detailed information to assist you in identification of the correct center bearing for your application, first locate the manufacture of the driveline and the diameter of the bearing ID, then check the notes and double check the photo of the center bearing. Call us if you need additional information or cannot find the part you need. Free technical support call today and talk to a drivetrain expert. Clicking on images below will provide a larger view.
Center Bearing Supports Products
|Photo||Part Number||Make||Model||Year||Series||Bearing ID and Notes|
|DTS-PT2580-50||Audi||Multiple applications||1.181" , Mounting holes 7.375" C/C|
|DTS-PT3R80-25||Buick||Multiple applications||GM 3R Seriess||1.575", Mounting holes 2.250 C/C,, Housing and bearing included, Center of Bearing to top of mount is 3.50" Housing is 1" taller than 3R80-10|
|DTS-PT3R80-10||Cadillac||Multiple applications||GM 3R Seriess||1.575" Mounting holes 1.500" C/C, Center of Bearing to top of mount is 2.50". Housing and bearing included|
|DTS-PT3080-30||Jaguar||X-Type||2002-2006||Spicer 1100 1300300||2.559"|
|DTS-PT2680-50||Mazda||929||1988-1991||Mazda||1.102" Mounting holes 6.500 C/C|
|DTS-PT2680-30||Mazda||B2000, B2200 Manual 4X2||1986-1993||Mazda||.0985" Long bed/extra cab only,, Mounting holes 6.500" C/C|
|DTS-PT2680-40||Mazda||B2200 Automatic, B2600 4X2||1986-1993||Mazda||1.102 Mounting holes 6.500" C/C|
|DTS-PT2680-10||Mazda Ford||B1600/Courier||1972-1981||Mazda||0.985" Mounting holes 5.875 C/C|
|DTS-PT2880-15||Mercedes||Multiple applications||1.181", 1mm pad|
|DTS-PT2880-50||Mercedes||Multiple applications||Rubber Only|
|DTS-PT1480-50||Volvo||S70||1998-2000||Spicer 1100 1300300||.985" see 3080-20|
Other Driveline related issues: