Infiniti Driveline Replacement

Drivelines/, Rear Ends, Overdrive Units, Manual Transmissions and Transfer Cases, visit our Full Service

Shop Located in Reno/Sparks Nevada.  Save money send us your existing driveline core and we will re-build it and high speed balance, you save 20% or more.

A complete assortment of Drivelines & Drivelines and Service for your Infiniti is provided. We have been professionals in Driveline industry, with over 30 years in business, we have professional craftsman with the following Driveline capabilities:

  • Design
  • Repairs
  • Modifications
  • Complete Assemblies
  • Shortening / Lengthening companies, manufactures OE replacements, repair and balance drive shafts for consumers throughout the world. We have created specific tooling that used to assemble and equilibrium balance your driveline, these skills and experienced personnel lead to exceptional unparalleled efficiency shafts that deliver a lot better than OE specifications.  See detailed list of driveline we can provide for your Infiniti.

Select vehicle from table below to see drivelines/driveshafts we offer for other manufacture vehicles.

Dodg Van
Dodge Truck
G Series Chevy 
 Honda Ridgeline
Honda Ridgeline
J10 Truck
J10 Jeep Truck
 Jeep 0  Jeep 0   Jeep 4
Jeep Commander
jeep logo 3
Jeep Cherokee
Jeep Grand Wagoneer
Jeerp logo 2
Jeep Liberty
 KIA logo
Lexus logo

Driveline Vibrations Problems Infiniti 

This issue is normally brought on by worn u-joints or dings and/or dents in your tubing. We can provide help or tips with u- joint maintenance for your Infiniti.

If you have a two-piece Driveline it's important to balance the complete assembly at the same time, just contact us (800-216-1632) we will help you get rid of vibrations.

See our free information below on how to keep up with troubleshooting drivelines with angle phasing concerns.

Driveline Problems Troubleshooting Infiniti:

Driveline Failure Symptoms Infiniti

New or strange noises from under the vehicle are a symptom of a problem with the driveline. These noises can emulate from the following:

  • Transmission case bushing or center support bearing that facilitates the Driveline malfunction.
  • Driveline U-joints excessive wear or failing will interfere with the driveline’s ability to rotate properly. This will cause; rattling, clunking, scraping, or even squeaking sounds.
  • When the u-joint binds and breaks, when it falls from the transmission, transmission fluid will be lost quickly from the tail shaft, and the engine will rev higher than expected. This can result in transmission damage.
  • U-joint parts could be working dried out of lubrication may also result in a squeaking sound at low rates of speed. Clicking or knocking sounds specifically can indicate a faulty CV joint. Any noises such as these are an indicator that your vehicle is ready for maintenance.
  • Problems with turning the vehicle is another likely sign of a bad driveline. A broken Driveline can prevent wheels from turning properly, giving you trouble when trying to make turns. This issue limits your overall control of the car. You need any issues that prevent you from driving the car correctly addressed right away for safe driving and continued use of the vehicle.

Driveline Shuddering Problem Infiniti

Experiencing a significant shudder when accelerating from low speed or a stopped position, it can be another sign of failing Driveline components. A U-joint or bad center bearing within the Driveline may cause the faltering acceleration. You may also hear sounds while the car is shuddering from the worn-out U-joint. Driveline failure at freeway speeds is traumatic, don’t let it happen to you or your wife.

We offer both front and rear shafts plus customized (for your application) if required. New OEM shafts as well as remanufactured driveline's are available, let us repair your existing driveline assembly and you save money.

We are able to fabricate over 5 different  drivelines for your Infiniti.  Plus we offer a complete line of new Spicer Dana and NEAPCO yokes, u-joints, and flanges, existing shafts reduced or lengthened.

Also offered are Heavy Duty industrial shafts are one of our main product lines, such as over the road 18 wheelers, farm and construction, and mining shafts. Dual and individual CV joint shafts made for automobiles with point of view problems are accessible, in addition to shafts designed to your specific style specs.

The primary function of your Driveline is to transmit power from a single point (rear) of transmission to a different point (differential) with a smooth and constant action. In building vehicles, the drivetrain was created to distribute torque through aspects from the transmission towards the axle (or auxiliary transmission). The Driveline must work through constantly changing general perspectives in between the transmission and axle. It must also be able to transforming length while transmitting torque (by way of the slip yoke). The axle is not connected to the frame, but rides suspended by springs inside an irregular, hovering activity. This indicates the Driveline must have the capacity to increase, convert and contact working perspectives, when experiencing protrusions or depressions. This can be attained through widespread u-joints, which allow the driveline to be used at divergent viewpoints, as well as slip yokes, which allow contraction or progress to occur.

Whenever your shaft driveline is not well-balanced with all the authentic slip yoke and U-joint components, you could have set up the possible vibration’s issues. Our service features the most recent in driveline tooling, balancing and manufacturing devices.  Want to review our detailed high-quality production facility, tooling and equipment we have provided a detailed video at driveline manufacturing process.

High Speed Balancing is definitely the key to clean vibrations free efficiency for your Infiniti!

A Driveline is not going to run clear and vibrations- free unless it really is properly balanced. Our shafts are, after construction and before welding, pre-straighten inside a unique hydraulic instrument, it is straightened to better than OE manufacturing facility specifications. We then dynamically high-speed harmony balance the whole shaft assembly at the speed representative of the rate the shaft will come across in its regular application.

We also specialize in high end service, should you be sending us your old driveline to get rebuilt your driveline will leave our shop within 36 hours after being received. Don't see what part you need just call us toll free (800-216-1632), free of charge technical support is provided.

Drivetrain’s one-part drivelines are transported put together and ready to set up completely from the box. Our shafts are manufacturer well-balanced for guaranteed clean functioning and a long life. Simply remove the outdated driveline  and install the brand new one in its spot. 

Driveline Parts Infiniti!

We can also provide both new and good take out driveline parts individually, our good take out program (GTO) is designed to save you money!   Large stock of Dana Spicer and NEAPCO  inventory includes:

  • Yoke Shafts
  • Weld Yokes
  • End Yokes
  • Stub shaft ends
  • Slip Yokes
  • U-joints
  • Tubing

To ensure exact replacement driveshaft for your application we will need to know the following information:

  • Make, model and year of vehicle
  • Manual or Automatic transmission, with or without external overdrive
    3, 4,  5 or 6 speed transmission
  • Model number of transfer case (if 4WD)
  • Engine size and type (diesel or gasoline - 4, 6, or 8 cylinder)
  • Series of drive shaft (if you know it)
  • Wheel base of vehicle
  • Measure from center of ujoint front to back center of ujoint
  • Location of Driveshaft (front or rear)

Don't see what you need just give our Driveshaft Technical expert a call toll free 800-216-1632, free technical support.

See general applications guide/table below, simply click part number to get further information or to place an order on-line. 

 Please Click On Part Number to see more information or purchase your driveline Online .

Part Number Description Min Year Max Year Your Cost
DTS3192-315 Infiniti Driveline FX35 AWD/Rear Shaft Auto Trans 2003 2008 $580.66
DTS3192-313 Infiniti Driveline FX35 AWD/Rear Shaft Auto Trans 2003 2006 $580.66
DTS3192-314 Infiniti Driveline FX35 AWD/Rear Shaft Auto Trans 2003 2006 $580.66
DTS1292-301 Infiniti Driveline FX35 AWD/Rear Shaft Auto Trans 1990 1997 $496.86
DTS1292-300 Infiniti Driveline FX35 AWD/Rear Shaft Auto Trans 1990 1992 $496.86

Inifity Driveline Products