Driveshaft Jeep J-Series Truck

Driveshaft Jeep J10 Truck

Complete Driveshafts Service for your Jeep J10 truck.  We offer drivelines for all Cars and Trucks.

Jeep J Series Truck

Recreational/RV Motor homes, Foreign, Domestic Vehicles as well as 4 x 4 off road and 4wd Trucks plus all Jeeps. Custom, New OEM units and rebuilt driveline's, let us rebuild your existing driveshaft and you save money at least 20%. We offer a complete line of new Spicer Dana and NEAPCO end yokes, u-joints, and flanges, existing shafts shortened or lengthened.

Heavy duty off road and commercial units are one of our main specialties, including farm, construction, golf course, mining and PTO equipment. Double and single Cardan CV joint shafts manufactured for vehicles with angle problems. See general applications , don't see what you need just give us a call toll free 800-216-1632, free technical advise.

Drivelines/Driveshafts, Rear Ends, Overdrive Units, Manual Transmissions and Transfer Cases, Full Service Shop stop bye and say hello Reno/Sparks Nevada

See Detailed list of driveshafts we can provide for you J Series Truck.

Select vehicle from table below to see other drivelines/driveshafts we offer for other manufactures vehicles.!

Jeep J10
Dodg Van
Dodge Truck
G Series Chevy 
 Honda Ridgeline
Honda Ridgeline
J10 Truck
J10 Jeep Truck
 Jeep 0  Jeep 0   Jeep 4
Jeep Commander
jeep logo 3
Jeep Cherokee
Jeep Grand Wagoneer
Jeerp logo 2
Jeep Liberty
 KIA logo
Lexus logo

Need help or tips with u joint repair tips for jeeps or truck as well as lowered cars, just give us a call we can help you remove vibration problems. See our free information below on how to maintain or troubleshoot driveline's and driveshafts including angle phasing issues.


  • Lifting your vehicle?
  • Lowering your vehicle?
  • Want to replace an aluminum driveshaft?
  • Want to replace a carbon fiber drive shaft?
  • Or just need a replacement?

30 Years Experience, we can Help!

Save money send us you core and we will re-builld it and high speed balance your shaft.  Save 20% or more.

Troubleshooting Driveline Problems:

Angles and Phasing - Diagnostic & Testing

Field Problem Analysis and Answers

Troubleshooting Driveline Problems

Center Bearing Support Bracket

Review our You tube video, see how drivelines are manufactured

Driveshaft Possible Vibrations Problems Jeep J10 Truck

This challenge is usually caused by used or worn u-joints or dings and dents in your driveshaft tubing. We can offer support and tips for u joint maintenance for your Jeep J10 Truck. See troubleshooting guides above.

Running raised trucks with larger tires, are you changing the transfer case model, or transmission. If you have a two piece driveshaft it's important to balance the complete assembly at the same time, just contact us (800-216-1632) we will help you get rid of vibration problems. See our free information on how to keep up or troubleshoot driveline and with angle phasing concerns.

Driveshaft  Failure Symptoms Jeep J10 Truck

New or strange noises from under the vehicle are a symptom of a problem with the driveshaft. These noises can emulate from the following:

  • Failure of Transmission or T-Case rear bushing or driveshaft center support bearing will facilitate driveshaft malfunction. Driveshaft U-joints excessive wear or failing will interfere with the driveshaft’s ability to rotate properly. This will cause; rattling, clunking, scraping, or even squeaking sounds.
  • U-joints might be operating dry of lubrication may also produce a squeaking noise at lower speeds. Clicking or knocking sounds specifically can indicate a faulty CV joint. Any noises such as these are an indicator that your vehicle is ready for maintenance. Problems with turning the vehicle is another likely sign of a bad driveshaft.
  • A broken driveshaft can prevent wheels from turning properly, giving you trouble when trying to make turns. This issue limits your overall control of the truck. These issues can prevent you from driving the truck correctly.

Driveshaft  Shuddering Problem with Jeep J10 Truck

Experiencing a significant shudder when accelerating from low speed or a stopped position, it can be another sign of failing driveshaft component. A U-joint or bad center bearing within the driveshaft may cause the faltering acceleration. You may also hear sounds while the truck is shuddering from the worn-out U-joint. Driveshaft  failure at freeway speeds is traumatic, don’t let it happen to you or your wife.

Driveshaft Modifications Jeep J10 Truck

Vehicles with 4 x 4 off road and 4wd s tend to be harder on the driveshafts. We offer both front and rear shafts plus customized shafts (for your application) if required. New OEM shafts as well as re-manufactured drivelines are available, let us repair your existing driveline assembly and you save money.

When you are modifying your vehicle the drivelshaft often needs modifying to; Lifting or lowering the suspension, swapping transmissions or axles, 4x4s, rock crawlers, hotrods, customs, all of these things usually require drive shaft modification to be done correctly. 

We are able to fabricate over 100 different drivelines configuration for the Jeep J10 Trucks. We also provide a  full assortment of new Spicer Dana and NEAPCO yokes, u-joint parts, and flanges, existing  shafts reduced or lengthened. Individual driveshaft parts available to assist you with your driveshaft.

Also, heavy duty industrial  and Off Road shafts are our primary products areas such as over the highway 18 wheeler, farming, building, construction and mining shafts. We also have a large stock of power take off shaft (PTO). Double and individual CV joint shafts created for vehicles with perspective problems (angle) are available, along with shafts designed to your particular engineering and design specs.

The essential function of your driveshaft is always to transmit energy from a point (rear of transmission or transfer case to another point with constant action. In construction, trucks and s, the drivetrain was created to send torque through angles from your transmission for the axle (or auxiliary transmission). The driveshaft must go through

constantly changing general viewpoints (angles) in the middle the transmission and axle. It must also be able to transforming size while transmitting torque (by way of the slide yoke). rides suspended by springs inside an unusual, hovering motion. This indicates the driveshaft must have the capacity to broaden, change and contact working perspectives, when experiencing protrusions or depressions. This is often accomplished through common joint parts, which permit the driveline to be used at divergent angles, in addition to slip yokes, which allow contraction or growth to happen.

When your drive/shaft  is not well-balanced with all the genuine yoke and U-joint components, you could have not repaired the possible vibrations. Our facility features the newest in driveshaft  production, and precision equipment and tooling. 

Driveshaft High Speed Balancing is the key to remove vibrations  providing totally free efficiency for your Jeep J10 Truck!

A driveshaft is not planning to operate clear and vibrations free unless it is right plus in balance. Our shafts are, right after set up and before welding, pre-straighten inside a unique hydraulic tool, it is actually straightened to improve than factory specifications. We then dynamically highspeed harmony of the whole shaft assembly.

Want to review our detailed high quality  driveline manufacturing process we have provided a detailed video. We also specialize in high end service, if you are delivering to us your outdated driveline to be rebuilt your driveline will leave our store within 36 hours after being received. Don't see what you need just contact us toll free (800-216-1632), free technical support.

Drivetrain’s single-piece drivelines are transported assembled and ready to install completely from the box. Our shafts are factory balanced for guaranteed performance, along with a lengthy service life. Simply eliminate your outdated drive shaft and install the newest one in its place.

Driveshaft Parts Jeep J10 Truck

We can also provide both new and good take out Driveshaft parts individually, our GTO program is designed to save you money!   Large stock of Dana Spicer and NEAPCO  inventory includes:

  • Yoke Shafts
  • Weld Yokes
  • End Yokes
  • Stub shaft ends
  • Slip Yokes
  • U-joints
  • Tubing


To guarantee exact replacement driveshaft by application we will need to know the following:

  • Make, model and year of vehicle
  • Manual or Automatic transmission, with or without separate overdrive
  • 3, 4, 5 or 6 speed transmission
  • Make and model of transfer case
  • Engine size and type (diesel or gasoline - 4, 6, or 8 cylinder)
  • Wheel base of vehicle
  • Measurement  from center of front ujoint cap to back center of ujoint cap
  • Location of Driveshaft (front or rear) 

Please Click On the Part Number below for more information or to purchase  online . You can just give us a call (800-216-1632) we can help you get the correct parts the first time!

Part Number Application
3194-2450 J-Series Truck (J10) AWD/4WD Front Automatic 5.9L
3194-2450 J-Series Truck (J10) AWD/4WD Front Automatic 6.6L
3194-2450 J-Series Truck (J10) AWD/4WD Front Manual 4 Sp
3194-2637 J-Series Truck (J10) AWD/4WD Front Manual 
3194-2637 J-Series Truck (J10) AWD/4WD Front Manual 4 Sp
3194-2712 J-Series Truck (J10) AWD/4WD Front Automatic 5.7L
3194-2450 J-Series Truck (J20) AWD/4WD Front Automatic 5.9L
3194-2450 J-Series Truck (J20) AWD/4WD Front Automatic 6.6L
3194-2450 J-Series Truck (J20) AWD/4WD Front Manual 4 Sp
3194-2712 J-Series Truck (J20) AWD/4WD Front Automatic