These quality manual transmission parts, rebuild kits and overhaul kits are designed to be top of the line overhaul kits. Below you will find information on how to identify individual transmissions, application information, model year, and detailed kit and part availability by transmission type. NV1500 transmission are covered in this section they are rear wheel drive (RWD). Typically used in Chevrolet, Dodge, GMC, Isuzu pickup trucks and Jeeps requiring 5 speed applications.
Different overhaul kits are available depending on the extent of the overhaul that you planning, the contents of the kits are described as follows:
-
DTSBKXXX Kits (RWD): Main case bearings, gaskets, seals. You may also want to add new bearing retainer, nuts, dogs & wires, extension housing bushing, small parts kit, shifter bushings. Syncro rings are not included in these kits.
-
DTSBKXXXWS Kits (RWD): Main case bearings, gaskets, seals. You may also want to add bearing retainer, nuts, dogs & wires, extension housing bushing, small parts kit, shifter bushings. Syncro rings are included in these kits.
Information and parts are provided for the following transmission: NV1500 Truck 5 Speed (RWD) an illustrated drawing is provided to assist you in parts identification, Drawing reference numbers are supplied were possible.
IDENTIFICATION: Aluminum end loaded case with integral bell housing and "waffle" pattern cast into the case.
It's easy to get the correct parts the first time from drivetrain.com. Using the application tables below just locate your vehicle model, model year, number of cylinders and engine size read across to identify correct overhaul kit part number. Make a note of the part number and complete our secure easy order from.
NV1500 Manual Transmission Overhaul Kit Products
Please Click Part Number to buy it online
Vehicle | Model | Cylinder | Engine | Year | Description |
Overhaul Kit |
Your Cost |
Overhaul Kit with Syncro Rings |
Your Cost |
Chevrolet | Blazer (S Series) | 4cyl | 2.2L | 1996-on | "Mini-Getrag" aluminum case, rear load | DTSBK416 | $116.46 | DTSBK416WS | $320.18 |
Chevrolet | S10 | 4cyl | 2.2L | 1996-on | "mini-Getrag", aluminum case, rear load - ball input bearing | DTSBK416 | $116.46 | DTSBK416WS | $320.18 |
Dodge | Dakota | 4cyl | 2.5L | 2000-on | DTSBK494 | $152.26 | DTSBK494WS | $227.57 | |
GMC | Jimmy- S Series | 4cyl | 2.2L | 1996-on | "Mini-Getrag" aluminum case, rear load | DTSBK416 | $116.46 | DTSBK416WS | $320.18 |
GMC | S15 - S Series | 4 cyl | 2.2L | 1996-on | "Mini-Getrag" aluminum case, rear load | DTSBK416 | $116.46 | DTSBK416WS | $320.18 |
Isuzu Truck | Hombre | 4cyl | 2.2L | 1996-00 | aluminum case and tail | DTSBK416 | $116.46 | DTSBK416WS | $320.18 |
Jeep | Liberty | 4cyl | 2.4L | 2002-on | RWD or 4WD, - tapered countershaft bearings | DTSBK494A | Call | DTSBK494AWS | Call |
Part Number |
Description |
Years |
Cost |
|
Syncro Ring Kit |
|
|
||
SK144 | Syncro Ring Kit Brass |
1996-up |
$126.20 |
|
Miscellaneous Kit |
|
|
||
ALTNV1500GSK | Re-Seal Kit (2) |
$16.72 |
||
Drawing Reference | Miscellaneous Parts |
|
|
|
2 |
21442 | Main Shaft |
|
$168.60 |
2.5 |
23186 | 3-4 Syncro Assembly |
|
$83.26 |
8 |
22346 | Cluster Gear |
|
$314.00 |
11 |
26453 | 3rd Gear |
|
$106.60 |
12 |
21385 | 1st Gear |
|
$109.86 |
16 |
20632 | Input Shaft |
|
$209.40 |
18 |
24994 | 5th Gear 27 teeth |
|
$67.21 |
21 |
25670 | 2nd Gear |
|
$111.89 |
23 |
21384 | 1-2 Shift Fork |
|
$31.90 |
23A |
28886 | 3-4 Shift Fork |
|
$29.47 |
23B |
21382 | 5-R Shift Fork |
|
$33.30 |
36 |
24799 | Reverse Gear |
|
$103.84 |
40 |
23186 | 5th - Rev Syncro Assembly |
|
$84.26 |
80 |
21553 | 1-2 Syncro Assembly |
|
$79.80 |