
Different overhaul kits are available depending on the extent of the overhaul that you planning, the contents of the kits are described as follows:
-
DTSBKXXX Kits (RWD): Main case bearings, gaskets, seals. You may also want to add new bearing retainer, nuts, dogs & wires, extension housing bushing, small parts kit, shifter bushings. Syncro rings are not included in these kits.
-
DTSBKXXXWS Kits (RWD): Main case bearings, gaskets, seals. You may also want to add bearing retainer, nuts, dogs & wires, extension housing bushing, small parts kit, shifter bushings. Syncro rings are included in these kits.
Information and parts are provide for the following Transmission: Toyota R151 5 Speed RWD and 4WD.
Model | Cyl | Engine | Trans. Model | Year | Description | Overhaul Kit |
Your Cost |
Overhaul Kit with Syncro Rings |
Your Cost |
PICKUP | 6cyl | 3.0L | R151 | 1994 | Aluminum case, removable bellhousing - 59mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses typical wire type springs - all synchro rings are single piece design | DTSBK163C | $224.44 | DTSBK163CWS | $411.50 |
PICKUP | 6cyl | 3.0L | R151 | 1995 | Aluminum case, removable bellhousing - 59mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses coil type springs - 2nd synchro ring is multi-piece design | DTSBK163C | $ 224.44 | DTSBK163DWS | $629.99 |
PICKUP | 4cyl | 2.4L | R151 | 1985-88 | Aluminum case, removable bellhousing -1 Ton - 72mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses typical wire type springs - all synchro rings are single piece design | DTSBK163 | $ 244.14 | DTSBK163WS | $ 358.90 |
PICKUP | 4cyl | 2.4L | R151 | 1986-88 | Aluminum case, removable bellhousing Turbo - 72mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses typical wire type springs - all synchro rings are single piece design | DTSBK163 | $ 244.14 | DTS BK163WS | $ 358.90 |
PICKUP | 6cyl | 3.0L | R151 | 1988-94 | Aluminum case, removable bellhousing - 72mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses typical wire type springs all synchro rings are single piece design | DTSBK163 | $ 244.14 | DTSBK163WS | $323.93 |
T100 | 6 cyl | 3.0L | R151 | 1993-94 | Aluminum case, removable bellhousing | DTSBK163 | $ 244.14 | DTSBK163WS | $ 358.90 |
T100 | 6 cyl | 3.0L | R151 | 1994-95 | Aluminum case, removable bellhousing - 59mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses typical wire type springs - all synchro rings are single piece design | DTSBK163C | $ 224.44 | DTSBK163CWS | $ 411.50 |
T100 | 6 cyl | 3.4L | R151 | 1995-99 | Aluminum case, removable bellhousing - 59mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses coil type springs - 2nd synchro ring is multi-piece design | DTSBK163C | $ 224.44 | DTSBK163DWS | $629.99 |
TACOMA | 4 cyl | 2.7L | R151 | 1995-00 | Aluminum case, removable bellhousing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 2nd synchro ring is multi-piece design | DTSBK163C | $ 224.44 | DTSBK163DWS | $629.99 |
TACOMA | 6 cyl | 3.4L | R151 | 2001-on | Aluminum case, removable bellhousing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro rings are multi-piece design | DTSBK163C | $ 224.44 | DTSBK163FWS | $ 607.27 |
TUNDRA | 6 cyl | 3.4L | R151 | 2000 | Aluminum case, removable bellhousing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 2nd synchro ring is multi-piece design | DTSBK163C | $ 224.44 | DTSBK163DWS | $ 629.99 |
TUNDRA | 6 cyl | 3.4L | R151 | 2001on | Aluminum case, removable bellhousing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro rings are multi-piece design - 72mm O.D. rear mainshaft bearing - 92mm O.D. input bearing (040-1), (35TM03), (DG4092 or 40TM05) - 1st and 2nd synchro assembly uses typical wire type springs all synchro rings are single piece design | DTSBK163C | $ 224.44 | DTSBK163FWS | $ 730.31 |
SUPRA | 6 cyl | 3.0L | R154 | 1986-93 | Aluminum case with a rear load - Turbo - 1st-2nd and 3rd-4th synchro assemblies use wire type springs - 92mm O.D input bearing. (35TM03 or DG4092) | DTSBK163 | $ 244.14 | DTSBK163WS | $323.93 |
Description |
Type |
Years |
Cost |
|
Syncro Ring Kits |
|
|||
SK506 | Syncro Ring Kit | 3rd-5th Rings Same Inside Cone |
1986-90 |
$108.86 |
SK506L | Syncro Ring Kit | 5th Inside Cone Different Than 3rd-4th |
1991-94 |
$118.28 |
Miscellaneous Kit |
|
|||
DK506 | Syncro Dog & Spring Kit | Wire Type Springs |
1986-92 |
$33.46 |
Metal Clad Seals |
|
|||
301080 | Front |
1986-97 |
$7.92 |
|
48551 | Rear | 2WD |
1986-97 |
$6.74 |
301082 | Rear | 4WD |
1986-97 |
$10.05 |
MISCELLANEOUS |
|
|||
301441 | Rear Bushing | Not in Kits |
1986-97 |
$35.00 |