Never get stuck again!		Powertrax No-Slip is the breakthrough technology that SUV, Pickup, Car Owners and serious Off-roaders have been waiting for. Over three years in development and testing Powertrax now brings precise synchronization to extreme traction output. You can feel the difference as soon as you hit the road -- and as soon as you leave it. Rod Miller
		Exploded View

A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring design reduce the backlash and therefore driveline windup. Only ultra strength material is used which is 67% stronger than titanium. The No-Slip Traction System will significantly enhance the traction of your light truck, sport utility vehicle, or van by sending the engine power to the wheels that need it most. Yet on dry pavement, the No-Slip Traction System will allow for full wheel differentiation to prevent additional tire wear. Operation is smooth, quiet and dependable. owing your boat, RV, or trailer is no problem with the No-Slip Traction System installed. Never get stuck on the boat ramp again. It's also ideal for vehicles with plows or that operate in construction areas. Installation is simple because no ring and pinion set-up is required. In addition, no special tools or oils are needed. Step by step model specific instructions are provided with every kit.

The No-Slip Traction System is the ideal solution for just about any light truck, sport utility, and muscle car on the road today. Whether you need the safety of added traction for daily commuting, recreation, work, or just so your muscle car puts power to the pavement instead of burning one wheel up, the No-Slip Traction System is your answer.

Applications cover virtually all 4x2 and 4x4 trucks, sport utility vehicles, vans, recreational vehicles and many rear wheel drive passenger cars. Both front and rear axle applications are available for 4x4 vehicles.

Find your Chevy Van and SUV's vehicle in the application guide listed below

The No-Slip works well on the front axle of 4-wheel drive vehicles provided a couple important guidelines are followed. The No-Slip should be used only on vehicles equipped with locking hubs on the front axle or with front axle disconnect. In addition, the vehicle must not be equipped with full time 4-wheel drive. Vehicles equipped with a No-Slip on the front axle should not be operated on the highway with the front hubs locked and 4-wheel drive engaged. Steering -- The affect on steering produced by a No-Slip may contributed to a degree of "under-steer" when turning under power. Sudden throttle changes during turns will accentuate "under-steer", especially on slippery or unstable surfaces. Following these guidelines will ensure very on-road derivability while still providing maximum off-road tractions. Be sure to maintain caution and drive carefully under control under all conditions.