no-Slip Scout

 

Don't get stuck again!

A good do it yourself project, no gauges or dial indicator required, installation without requiring reset up of ring and pinion back lash!		  
noslip_rodmiller_large.jpg
Powertrax No-Slip is the breakthrough technology that SUV, Pickup, Car Owners and serious Off-roaders have been waiting for. Over three years in development and testing Powertrax now brings precise synchronization to extreme traction output. You can feel the difference as soon as you hit the road -- and as soon as you leave it. Rod Miller

powertraxlogo_large.jpg

  
noslipexp_large.jpg
The Powertrax® Traction No-slip systems are the latest design in traction adding differential technology. It combines the smooth operation of a limited-slip differential, with the traction performance of a locking differential for your Scout.

A precise synchronization mechanism eliminates the ratcheting sounds typical of other locking differentials. Special gear and spring design reduce the backlash and therefore driveline windup. Only ultra strength material is used which is 67% stronger than titanium.

Installation is simple because no ring and pinion set-up is required. In addition, no special tools or oils are needed. Step by step model specific instructions are provided with every kit.

The Powertrax® Traction No-slip systems are the ideal solution for just about any light truck, sport utility, and muscle car on the road today. Whether you need the safety of added traction for daily commuting, recreation, work, or just so your muscle car puts power to the pavement instead of burning one wheel up, the Powertrax® Traction Systems are your answer.

The Powertrax® Traction No-slip systems will significantly enhance the traction of your light truck, sport utility vehicle, or van by sending the engine power to the wheels that need it most. Yet on dry pavement, the Powertrax® Traction No-slip systems will allow for full wheel differentiation to prevent additional tire wear. Operation is smooth, quiet and dependable.

The Powertrax® No-slip performs under a variety of rugged conditions. Whether it’s snow, ice, mud, sand, gravel, or the street, the POWERTRAX® Traction System will help get you to your destination. Its extremely rugged for towing your boat, RV, or trailer is no problem with the No-slip system installed. Never get stuck on the boat ramp again. It's also ideal for vehicles with plows or that operate in construction areas.

  • Gives two-wheel drive vehicles the traction power of 4 x4's
  • Delivers ultimate traction to four-wheel drive vehicles
  • East to install -- do it yourself without any special tools
  • Smooth and quiet operation
  • Precision synchronization control makes friction clutches obsolete
  
  • Proven worldwide by serious off-road and performance enthusiasts
  • State-of-the-art engineering and design for maximum power transfer
  • Space-age Zytanium construction for highest strength and durability
  • Installs inside open, limited slip and locking differential cases
See Installation instructions before you purchase   See Users Guide

 

Applications cover virtually all 4x2 and 4x4 trucks, sport utility vehicles, vans, recreational vehicles and many rear wheel drive passenger cars. Both front and rear axle applications are available for 4x4 vehicles.
 

Find your Scout vehicle in the application guide listed below:

Vehicle Make

Year

Mfg. of Axle

Axle Model

Spline Count

Cover Bolts

Special Notes

Open

Limited Slip/
Scout Rear 1967-1971 Dana Model 44 19 10   92-0444-1900  
Scout II Front 1972-1980 Dana Model 44 30 10   92-0444-3000 92-0444-3020
Scout II Rear 1968-1980 Dana Model 44 30 10   92-0444-3000 92-0444-3020