Chrysler 8.75 Inch Ring Gear and Pinion Sets plus Differential Parts
|
 Searching for rear end parts by application, call 800-216-1632
|
We offer a complete line of rear end parts for
the Chrysler/Dodge 8.75 inch 10 bolt differentials. Parts are available for thee different series of Chrysler 8.75" differentials the
741 Series, the
742 Series and the late
489 Style. used in Fury, Imperial, Town and Country, Road Runner, Satellite, Super Bee, Barracuda, Belvidere
Charger, Valiant, Concord and Dart. You can purchase high quality ring and pinion sets in various ratios, also high quality rear end bearing overhaul kits that include pinion bearings, pinion seal, crush sleeve, pinion nut, shims, ring gear bolts, marking compound and gasket. This Chrysler/Dodge differential was utilized by Chrysler in their passenger car (Muscle Car) line starting in 1960 and is also used in Dodge’s pickup truck. Our inventory includes ring gear and pinion sets, including aftermarket and OE gear sets. We are able to supply axles, internal kits for open carriers that include spider/side gears, cross shafts and trust washers, carriers, cases. Positraction units we offer include Lockrights by Powertrax, Auburn, Detroit Lockers, Trac Loc and ARB air lockers.
Along with our quality parts you have access to applications information for available ring and pinion ratios, information to assist you in identification of the differential that you have. Free information on ring and pinion installation is provided alone with specification and carrier/case breaks when you are considering gear ratio changes. You can review applications available to assist you with selection of the specific positraction unit that you may need to improve your performance.
Early 741 Style Housing
Click part number to see more information and purchase on line.
Chrysler 8.75" Ring Gear and Pinion Sets Products
Applications
| Model |
Year |
Model |
Year
|
| B200/B250 |
65-68 |
FURY/IMPERIAL/
TOWN & COUNTRY |
57-68
|
| BARRACUDA |
64-68 |
ROAD RUNNER/
SATELLITE |
67-68
|
| BELVIDERE/300 |
57-68 |
SUPER BEE |
68
|
| CHARGER (DAYTON) |
66-68 |
VALIANT |
60-68
|
CONCORD/MONACO/
POLARA |
63-68 |
W100/2150 |
65-68
|
| DART/SWINGER |
66-68 |
|
|
| |
|
|
|
Chrysler 8.75" Early 741 Series Ring & Pinion Part Numbers
|
Part #
|
Teeth
|
Ratio
|
| DTSMWC887355M |
39-11
|
3.55
|
| DTSMWC887373M |
41-11
|
3.73
|
| |
|
|
| Original design was 10 spline these ring and pinions are 29 spline must order 29 spline pinion yoke. |
|
 |
SPECIFICATIONS:
|
|
8-11/16"
10 HOLES
Round Gasket Pattern
|
- RG DIAMETER 8.75"
- 12 3/18" X 24 LH THREADED BOLTS
- PINION DIAMETER 1.375" 29 SPLINE
741 Style Casting - Straight Pinion
-
CASE: no case breaks
-
8620 Material Heat-Treated
Assembly Specifications:
- Housing Bolt Ft. Lbs. 35-40
- Pinion Brg. Preload In. Lbs 25-30
- Pinion Brg. Preload In. Lbs Used 15-25
- Ring Gear Backlash .006-.012
- Ring Gear Bolt to case Ft. Lbs. 55-60
- Side Brg. Caps Ft. Lbs. 65
-
Instructions for setting up ring and pinion backlash.
|
Chrysler 8.75" Early 741 Series Ring & Pinion & Bearing Price List
| Part # |
Description
|
R&P Jobber Price
|
| DTSMWC887355M |
Ring and Pinion Set
|
$216.67
|
| DTSMWC887373M |
Ring and Pinion Set
|
$216.67
|
|
|
Bearing Overhaul Kit
|
$91.67
|
|
|
Timken Bearing Overhaul Kit
|
$108.33
|
|
|
Bearing Overhaul Kit
|
$91.67
|
|
|
Timken Bearing Overhaul Kit
|
$108.33
|
|
|
Pinion Shims
|
$10.42
|
|
|
Crush Sleeve
|
$13.33
|
| DTSMW5126B |
Pinion Seal |
$4.64
|
| DTSMW1260823 |
Pinion Nut |
$2.25
|
| DTSMW1304 |
Ring Gear Bolt |
$2.50
|
| DTSMW5101 |
Cover Casket |
$1.67
|
Bearing Kits, these high quality Kit's include pinion bearings, carrier bearings pinion bearing seal, gasket, pinion and carrier shims, pinion nut, marking compound, crush sleeve and ring gear bolts. |
Gears run cooler and last longer! Order above high performance synthetic oil and friction additive combo kit at time of order for ring and pinion or bearing overhaul kit and pay only $36.76.
Quality guaranteed performance
|
Early 742 Style Housing
Applications
| Model |
Year |
Model |
Year
|
| B200/B250 |
65-68
|
NEW YORKER |
57-68
|
| BARRACUDA |
64-68
|
NEWPORT |
57-68
|
| BELVIDERE/300 |
57-68
|
ROAD RUNNER/
SATELLITE |
68
|
| CHALLENGER |
68
|
SUPER BEE |
68
|
| CHARGER (DAYTON) |
66-68
|
TRUCK 1/2 TON |
57-68
|
CONCORD/MONACO/
POLARA/CORONET |
63-68
|
TRUCK 3/4 TON |
65-68
|
| DART/SWINGER 66-68 |
|
VALIANT |
60-68
|
FURY/IMPERIAL/
TOWN & COUNTRY |
57-68
|
W100/2150 |
65-68
|
Chrysler 8.75" Early 742 Series Ring & Pinion Part Numbers
|
|
SPECIFICATIONS:
|
|
8-11/16" x 10 19/32"
10 HOLES
Round Gasket Pattern
|
- RG DIAMETER 8.75"
- 12 3/18" X 24 LH THREADED BOLTS
- PINION DIAMETER 1.75" 10 SPLINE
742 Style Casting - Straight Pinion
-
CASE: no case breaks
-
8620 Material Heat-Treated
Assembly Specifications:
- Housing Bolt Ft. Lbs. 35-40
- Pinion Brg. Preload In. Lbs 25-30
- Pinion Brg. Preload In. Lbs Used 15-25
- Ring Gear Backlash .006-.012
- Ring Gear Bolt to case Ft. Lbs. 55-60
- Side Brg. Caps Ft. Lbs. 65
Instructions for setting up ring and pinion backlash.
|
|
Bearing Kits, these high quality Kit's include pinion bearings, carrier bearings pinion bearing seal, gasket, pinion and carrier shims, pinion nut, marking compound, crush sleeve and ring gear bolts. |
Your gears run cooler and last longer! Order above high performance synthetic oil and friction additive combo kit at time of order for ring and pinion or bearing overhaul kit and pay only $36.76.
Quality guaranteed performance
|
Chrysler 8.75" Late 489 Series
Applications
| Model |
Year |
Model |
Year
|
| B200-B250 |
69-74
|
MONACO/POLARA |
69-74
|
BARRACUDA/
CHARGER (DAYTONA) |
69-74
|
NEWPORT/ NEW YORKER |
69-74
|
| BELVIDERE |
69-70
|
SATELLITE |
69-74
|
| CHALLENGER |
69-74
|
ROADRUNNER |
74-93
|
| CHRYSLER 300 |
69-73
|
SUPER BEE |
69-70
|
| CORONET |
69
|
TRUCK 1/2 TON |
68-74
|
| DART/SWINGER |
69-72
|
TRUCK 3/4 TON |
69-74
|
| DUSTER |
70-74
|
W100/W150 |
69-74
|
| FURY/VALIANT |
69-74
|
|
|
IMPERIAL/
TOWN & COUNTRY |
69-74
|
|
|
|
|
SPECIFICATIONS:
|
|
8-11/16" x 10 19/32"
10 HOLES
Round Gasket Pattern
|
- RG DIAMETER 8.75"
- 12 3/18" X 24 LH THREADED BOLTS
- PINION DIAMETER 1.875" 29 SPLINE
489 Style Casting - Straight Pinion
-
CASE: no case breaks
-
8620 Material Heat-Treated
Assembly Specifications:
- Housing Bolt Ft. Lbs. 35-40
- Pinion Brg. Preload In. Lbs 25-30
- Pinion Brg. Preload In. Lbs Used 15-25
- Ring Gear Backlash .006-.012
- Ring Gear Bolt to case Ft. Lbs. 55-60
- Side Brg. Caps Ft. Lbs. 65
-
Instructions for setting up ring and pinion backlash.
|
|
Bearing Kits, these high quality Kit's include pinion bearings, carrier bearings pinion bearing seal, gasket, pinion and carrier shims, pinion nut, marking compound, crush sleeve and ring gear bolts. |
Your gears run cooler and last longer! Order above high performance synthetic oil and friction additive combo kit at time of order for ring and pinion or bearing overhaul kit and pay only $36.76.
Quality guaranteed performance
|
Note: 25.00 minimum purchase.
