NP 261 NP263 Transfer Case Rebuild Kits and Parts
Are you having problems with your NP261/NP263 transfer case and need a rebuild kit or replacement parts? We offer quality professional rebuilt NP261/NP263 transfer case parts and rebuild parts kits that are designed to be top of the line overhaul kits. In 1999 NVG introduced the NP261/NP263 transfer case incorporated into the General Motors Chevrolet 1500, 2500, Suburban, Sierra and Silverado vehicles. The NP261/NP263 is a part time, two-speed manual transfer case, the NP261/NP263 is delivered in two different configurations light and heavy duty, manual mode shift utilizing dual cone synchronizer combine with advanced designed friction reducing parts integrated with a fine pitch chain, sprockets and advanced case material provide quiet operation and light weight. You can see the different ratings below:
NP261 Transfer Case Rebuild Kits and Parts Products
Transfer Case Model No. |
Max. Capacity Torque (Current Application) lb. ft. |
Weight lb. |
Oil Fill Capacity pints |
Oil Fill Capacity Liters |
Approx. Vehicle Weights GVW lb. |
NV 261* |
2564 |
69 |
5.1 |
2.4 |
7200 |
NV 261HD* |
5430 |
77 |
5.1 |
2.4 |
10000 |
NV 261SHD* |
5677 |
78 |
5.1 |
2.4 |
12000 |
Part-Time 4WD Operation, the vehicle operates normally in 2WD. The driver must shift into 4WD. "Shift-On-The-Move" allows shifting into 4WD without stopping. A cross reference table is provide to assist you in identification of your transfer case.
The NP261 & NP263 has a design problem, the pump can wear out the case causing premiture failure and leaking. The problem with merely replacing the case is it won’t solve the problem. Magnesium cases are soft; aluminum pumps are harder. The problem leak will come back and ruin your day. Maybe on someone else’s watch, but surely you pride yourself in fixing problems. Fix a factory defect, before problems arise we recommened our Case Saver part number MW52007. You need to install this part before the oil pump causes your transfer case damage.
If you case has a hole in it and you want to repair it without replacing the case order our part number TRS482460.
Check tag located on rear of unit for model number. An illustrated drawing is provide below to assist you in parts identification, ordering and assembly. Back to other model transfer case parts availability page, sometimes we can supply good used take out parts to save you money. Don't see what you need just give us a call toll free 800-216-1632. Detailed parts illustration is available. If you decide to replace your NV 261 transfer case with a remaufactued unit with a 12 month warranty see our complete list of transfer cases for Chevrolet/GMC vehicles. All rebuilt transfer case get new seals, bearings, chains, fork pad, encoder motors and viscous couplers. All shafts, slider, hubs and planets are inspect to ensure proper factory tolerances are maintained. All units are tested at the factory prior to shipment.
New Venture 261 | |||
1999-On GM 1/2 and 3/4 ton trucks, Suburban, Sierra, Silverado | |||
Part -Time Transfer Case | Recommended fluid for NP261 --GM part number 12378396 | ||
PART NUMBER |
DESCRIPTION |
TYPE |
YEARS |
DTS-BK371 | Rebuilder Kit - Bearings, Gaskets, O' Rings and Seals, 32 spline output shaft, |
1999-On |
|
DTS-BK371A | Rebuilder Kit - Bearings, Gaskets, O' Rings and Seals NP261XHD/NP263XHD, 31 spline output shaft,
(ZF 6 Spd / Allison Automatic)
|
2001-Up |
|
DLG-T371R | Rebuilder Kit - Bearings, Gaskets, O' Rings and Seals NP261 Non SHD/XHD | 1999-On | |
TRS-TSK-261 | Gaskets, O' Rings and Seals NP261, NP263 | ||
TRS-TSK-261XHD | Gaskets, O' Rings and Seals NP261XHD, NP263XHD | ||
TRS-401001A |
Small Parts Kit NP261 |
||
TRS-401001 | Small Parts Kit NP263 | ||
DTS-MW52007 | Transfer Case Saver prevent oil pump from damaging case use if case is not damaged, machined part | ||
TRS482460 | Case Saver , NP 246 Washer type protect rear case half from pump damage, stamped part | ||
TRS-331066 | Tail Housing Bushing NP261/NP263 | ||
TRS-334066 | Tail Housing Bushing NP261XD/NP263 | ||
TRS-411215 | Planet Thrust Washer (plastic) | ||
TRS-401850 | Mode Fork Aluminum Cast #28624 NP261/NP263XD |
1999-On |
|
TRS-352849A | Range Fork Aluminum Cast #17833 NP261 | ||
TRS-401849 | Range Fork NP263 except XHD | ||
TRS-401849A | Range Fork NP263XHD | ||
TRS-401646 | Mode Slider NP261/NP263 | ||
TRS-401645BK | Ranger Slider & Hub .318" wide NP261 | ||
TRS-401645K | Ranger Slider & Hub NP263 except XHD .368" wide | ||
TRS-401645AK | Ranger Slider & Hub NP263XHD | ||
TRS-401701-1 | Mode Syncro (inner) | ||
TRS-401701-3 | Mode Syncro (center) Friction | ||
TRS-401701-5 | Mode Syncro (outer) | ||
TRS-331843-2K | Mode Key & Spring Kit | ||
TRS-371500 | Pump Assembly NP261 |
|
|
TRS-401500 | Pump Assembly NP263 |
|
|
TRS-351012 | Pump Screen Filter | ||
TRS-401670 | Input Shaft 27 Spline 4L60E |
1999-On |
|
TRS-401670A | Input Shaft 32 Spline 4L80E |
1999-On |
|
TRS-HV-069 | Chain NP261HD GMT 800 Full Size Truck 49 Links 1.50" Wide, 98 Pins, 3/8" Pitch, Rocker Pins |
1999-On |
|
TRS-HV-072 | Chain NP261 NP263 49 Links 1.25" Wide, 98 Pins, 3/8" Pitch, Rocker Pins |
1999-On |
|
TRS-HV-074 | Chain Np264SHD &NP263HD2 Grand Cherokee CJ 01-Up, 42 links, 1.50" Wide, 84 Pins, 7/16" Pitch, Round Pins | ||
TRS-401805 | Drive Sprocket, NP261, NP261XHD | ||
TRS-401805A | Sprocket, NP263XHD | ||
DLG-NV45109 | Drive Sprocket hub | ||
TRS-351588A | Planetary, 6 Pinion use with .630" wide input bearing | Call and check on good take out used part save money |
|
TRS-401760-1 | Case Half Front NP263, NP263XHD | Call and check on good take out used part save money | |
TRS-401760-2 | Case Half Rear NP263, NP263XHD | Call and check on good take out used part save money | |
TRS-401760-A2 | Case Half Rear NP261 execpt XHD | Call and check on good take out used part save money |
|
TRS-401421 | Shift Actuator GM NP263 | ||
TRS-401420 | Shift Motor NP263, NP263XHD Square 6 Male Connector (new) (01-02) | Reman is available Call |
Illustration click image to enlarge and see parts list |
** Based on manual transmission and diesel engine (2.5 load factor).